----------------------------------------------------------
                           Engines-List Digest Archive
                                      ---
                     Total Messages Posted Sat 04/22/06: 4
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:40 AM - Engine mount bolts  (Gary Casey)
     2. 07:10 AM - Re: Engine mount bolts  (steve korney)
     3. 02:04 PM - test  (Jim Baker)
     4. 08:29 PM - Re: Engine mount bolts  (Fiveonepw@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:40:40 AM PST US
From: Gary Casey <glcasey@adelphia.net>
Subject: Engines-List: Engine mount bolts

--> Engines-List message posted by: Gary Casey <glcasey@adelphia.net>

I'm installing my Lycoming and I'm not sure what kind of bolt to use  
in the four engine mount isolators.  I'm assuming a standard bolt and  
nut with a flat washer and a star washer.  Is that the right  
combination?  No locking nuts or no castle nuts?

Gary Casey






 
 
 



________________________________  Message 2  _____________________________________


Time: 07:10:21 AM PST US
From: "steve korney" <s_korney@hotmail.com>
Subject: RE: Engines-List: Engine mount bolts

--> Engines-List message posted by: "steve korney" <s_korney@hotmail.com>

Grade 8 bolts with castle nuts and cotter pins... Torque to proper 
specifications for the mounts... There should be a spacer between the two 
rubber mount halfs...

Best... Steve



----Original Message Follows----
From: Gary Casey <glcasey@adelphia.net>
Subject: Engines-List: Engine mount bolts

--> Engines-List message posted by: Gary Casey <glcasey@adelphia.net>

I'm installing my Lycoming and I'm not sure what kind of bolt to use
in the four engine mount isolators.  I'm assuming a standard bolt and
nut with a flat washer and a star washer.  Is that the right
combination?  No locking nuts or no castle nuts?

Gary Casey











 
 
 



________________________________  Message 3  _____________________________________


Time: 02:04:01 PM PST US
From: "Jim Baker" <jlbaker@msbit.net>
Subject: Engines-List: test

--> Engines-List message posted by: "Jim Baker" <jlbaker@msbit.net>


Jim Baker
580.788.2779
Elmore City, OK







 
 
 



________________________________  Message 4  _____________________________________


Time: 08:29:22 PM PST US
From: Fiveonepw@aol.com
Subject: Re: Engines-List: Engine mount bolts

--> Engines-List message posted by: Fiveonepw@aol.com

Here's what Van's sells:

http://www.vansaircraft.com/cgi-bin/catalog.cgi?ident=1145762374-232-600&brows
e=engines&product=engine-boltkit

Or go to Van's webstore and search for " EA DYNA BOLT " for dynafocal mounts- 
search engines & accessories  section for conical etc.  

do not archive