----------------------------------------------------------
                           Engines-List Digest Archive
                                      ---
                     Total Messages Posted Sat 11/11/06: 3
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 05:19 AM - Re: Lycoming Data Plate  (James R. Cunningham)
     2. 10:11 AM - Re: Lycoming Data Plate  (Doug Dodson)
     3. 05:38 PM - Lycoming Manual  (Speedy11@aol.com)
 
 
 
________________________________  Message 1  _____________________________________


Time: 05:19:27 AM PST US
From: "James R. Cunningham" <jrccea@bellsouth.net>
Subject: Re: Engines-List: Lycoming Data Plate


a url of interest:

http://www.rollanet.org/~mopilots/stlouis/jan2005nws.htm


________________________________  Message 2  _____________________________________


Time: 10:11:40 AM PST US
From: "Doug Dodson" <douglas.dodson@pobox.com>
Subject: RE: Engines-List: Lycoming Data Plate


Based on the letter referenced in the URL, I would say that one should
ensure the engine and propeller are NOT type certificated at the time the
limitations and original airworthiness certificate are issued.  This could
be done with any number of somewhat minor modifications I would think.
Removing the type certificate designation after the original issuance could
be done as well I would think, but the aircraft would revert to Phase I for
a time.

Douglas L. Dodson, Jr.
Glasair II-S FT
Flight Test Engineer, CFI-A,G

-----Original Message-----
From: owner-engines-list-server@matronics.com
[mailto:owner-engines-list-server@matronics.com]On Behalf Of James R.
Cunningham
Sent: Saturday, November 11, 2006 6:45 AM
Subject: Re: Engines-List: Lycoming Data Plate


<jrccea@bellsouth.net>

a url of interest:

http://www.rollanet.org/~mopilots/stlouis/jan2005nws.htm


________________________________  Message 3  _____________________________________


Time: 05:38:17 PM PST US
From: Speedy11@aol.com
Subject: Engines-List: Lycoming Manual

Does anyone know of a Lycoming manual with diagrams or photos of the IO-360 
that I can buy?  I'm installing an IO-390 (same as 360) and I need to know 
where everything connects and what all those little holes are for.
Any help out there?
Stan Sutterfield