Today's Message Index:
----------------------
1. 04:04 PM - Engine Lord Mounts (Speedy11@aol.com)
2. 04:18 PM - Re: Engine Lord Mounts (Grant Piper)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Engine Lord Mounts |
I bought the Van's Lord mount kit for my IO-390 (same dimensions as IO-360).
For anyone who's installed their engine, to what value did you torque the
7/16 engine mounting bolts?
Did you use 475 inch pounds? Did you use coarse thread torque or fine
thread?
Thanks,
Stan Sutterfield
************************************** See what's free at http://www.aol.com.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Engine Lord Mounts |
Hi Stan,
You will have trouble getting a torque wrench onto these bolts, and it
may be of limited use. The rubber mounts must be compressed such that
the bolt is tight on the inner spacer (this limits the amount of
compression). The compression of the rubber will add to your torque
reading also. I've only installed a couple of enginmes, but in each
case did the bolts up tight on the spacer then as required to get the
cotter pins in.
regards,
Grant
----- Original Message -----
From: Speedy11@aol.com
To: engines-list@matronics.com
Sent: Monday, April 30, 2007 9:03 AM
Subject: Engines-List: Engine Lord Mounts
I bought the Van's Lord mount kit for my IO-390 (same dimensions as
IO-360).
For anyone who's installed their engine, to what value did you torque
the 7/16 engine mounting bolts?
Did you use 475 inch pounds? Did you use coarse thread torque or fine
thread?
Thanks,
Stan Sutterfield
-------------------------------------------------------------------------
-----
See what's free at AOL.com.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|