Today's Message Index:
----------------------
1. 03:48 PM - Re: prop bolts (AzevedoFlyer@aol.com)
2. 06:29 PM - Re: prop bolts (Noel Loveys)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Don,
I0360 and O320 share the same prop.
Assuming yours to be 3/8" bolt diameter, the torque is 24 to 25 lbf.ft.
Bolts must be dry, non lubricated.
Got this piece of info from Sensenich themselves.
Cheers,
Miguel Azevedo
PA22/20
************************************** Get a sneak peek of the all-new AOL at
http://discover.aol.com/memed/aolcom30tour
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Keep the lockwire nice and tight too.
Noel
-----Original Message-----
From: owner-engines-list-server@matronics.com
[mailto:owner-engines-list-server@matronics.com] On Behalf Of
AzevedoFlyer@aol.com
Sent: Sunday, July 29, 2007 8:18 PM
Subject: Re: Engines-List: prop bolts
Don,
I0360 and O320 share the same prop.
Assuming yours to be 3/8" bolt diameter, the torque is 24 to 25 lbf.ft.
Bolts must be dry, non lubricated.
Got this piece of info from Sensenich themselves.
Cheers,
Miguel Azevedo
PA22/20
_____
<http://discover.aol.com/memed/aolcom30tour/?ncid=AOLAOF00020000000982> .
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|