Today's Message Index:
----------------------
1. 11:38 AM - For Sale Very Good Continental 0-200 and Access, FWF CH701 (dougjones)
2. 06:05 PM - Re: Connecting rod length (Miguel Azevedo)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | For Sale Very Good Continental 0-200 and Access, FWF CH701 |
I am removing my Continental 0-200, accessories, and the firewall forward from
my CH701. The engine was "0" timed in 1993 (as far as my understanding but verify
with me if it is critical) , and currently has slightly less than 400 hours.
The engine itself is certified, but the electrical accessories, a B&C lightweight
starter and B&C 8 amp alternator, are not. The alternator keeps up with
landing lights, strobes, portable radio, electric fuel pump, at cruise RPM's,
but with these loads at taxi it is not large enough to charge. Complete logs
from "0" time. I can't find records of the mags (and can't remember right now
if the are Slick or Bendix). MS carburetor.
The engine runs perfectly. The oil pressure is right where you'd expect a new engine
to operate. The cylinders are chrome. Oil consumption is appx 8-12 hours
per quart. This engine has the Continental $200 + breather elbow found in 0-200
powered C-150 Aerobats. Oil Cooler. Last annual 4/2008 compressions were low
to mid 70's/80. Relatively dry inside cowling. Always a spot on concrete from
breather tube when parked
Warp Drive composite ground adjustable 3 blade prop.
Engine mount, pressure cowling for CH 701 if wanted.
This engine is currently installed and flown appx every two weeks. I intend to
remove it in April.
If you are really serious about a potential purchase, would like scanned images
of the logs, would like videos of it operating, pictures of the installation,
or would like to come inspect please contact me.
Asking $8300 for all. I'd rather sell everything all at once. I plan to advertise
on Barnstormers, engine/accessories only for $7800, in the next couple of weeks.
If interested leave message at (435)-734-2050 or email djonesutah(at)digis.net.
The engine is in Northern Utah.
--------
CH 701, Luscombe 8A
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=231680#231680
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Connecting rod length |
Teamgrumman,
>From Ray Crist, Lycoming Engineering:
Part Number 78030
Length between centers is 6.4985 / 6.5015 in (min. / max.)
Cheers,
Miguel Azevedo
PA22/20 - 150
On Mon, Feb 23, 2009 at 2:39 AM, <teamgrumman@aol.com> wrote:
> I can't find the connecting rod length of either the O320 or O360. Can
> anyone help?
> ------------------------------
> *A Good Credit Score is 700 or Above. See yours in just 2 easy steps!*
>
> *
>
> *
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|