Today's Message Index:
----------------------
1. 04:50 AM - Re: 360 vs 320 "flywheel" (FLYaDIVE)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 360 vs 320 "flywheel" |
Yes, Dean...
They will bolt onto each other BUT! What you have to check - COUNT -
is the number of teeth on the ring gear. A mis-match on teeth will
cause problems with the starter.
Barry
On Tue, Jun 22, 2010 at 11:53 PM, DEAN PSIROPOULOS
<dean.psiropoulos@verizon.net> wrote:
>
> Hi all:
>
> Quick question..the perimeter bolt holes (the inch holes just under the
> ring gear, not the prop bolt holes) on the 0-360 flywheel vs those on an
> 0-320is there any difference? In other words, if I lay an 0-320 flywheel
> on top of one for an 0-360 will the perimeter bolt holes all line up? Need
> to know if my Landoll steel ring for 0-360 will bolt onto 0-320 "flywheel".
> Thanks for the help.
>
> Dean Psiropoulos
> RV-6A N197DM
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|