Today's Message Index:
----------------------
1. 08:47 AM - Re: Re: Europa-List Digest: 15 Msgs - 05/21/03 (James H Nelson)
2. 11:00 AM - tail wheel mount (RK Hallett III)
3. 02:27 PM - Spar Pins (DvdPar@aol.com)
4. 03:43 PM - Re: Spar Pins (Kevin Klinefelter)
5. 03:43 PM - Re: tail wheel mount (Kevin Klinefelter)
Message 1
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RE: Europa-List Digest: 15 Msgs - 05/21/03 |
--> Europa-List message posted by: James H Nelson <europajim@juno.com>
Ed,
Don't you just love the plutocrats( I think it describes them)
and their babble. God help us in the colonies if WE let it get as bad as
you have it.
Jim Nelson
N15JN
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | tail wheel mount |
--> Europa-List message posted by: "RK Hallett III" <n100rh@sbcglobal.net>
The BM says to remove the inter sheet of glass before laying up 3 layers of BID
for the tail wheel mount. My XS kit came with multi layers of peel plied glass
in this area. It appears ready to start making up the mount without as the
manual states, removing that inter layer. England is closed for the day... so,
anyone have a thought?
Thanks,
Ralph
Mono Motorglider
Reno
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Europa-List message posted by: DvdPar@aol.com
Am I missing something?. The plans show one hard spring steel washer on the
bushing on the sbd spar tip.. There are two washers in the kit ??. Doen the
other end need one?
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Europa-List message posted by: "Kevin Klinefelter" <kevann@gte.net>
On page 27-12 of my XS manual is fig. 10 showing where both 281315 washers
go. And actually it's the spar cup, not the stbd. tip that one washer is
attached to.
Kevin
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of DvdPar@aol.com
Subject: Europa-List: Spar Pins
--> Europa-List message posted by: DvdPar@aol.com
Am I missing something?. The plans show one hard spring steel washer on the
bushing on the sbd spar tip.. There are two washers in the kit ??. Doen
the
other end need one?
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | tail wheel mount |
--> Europa-List message posted by: "Kevin Klinefelter" <kevann@gte.net>
Hi Ralph, Mine looked much the same as the rest of the inside of the
fuselage, don't remember it looking like it was peel plied. I think the idea
is to get rid of the foam, solid layups to handle the bolt and loads. Does
it look like the foam sandwich is continuous through the area?
Kevin
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]On Behalf Of RK Hallett III
Subject: Europa-List: tail wheel mount
--> Europa-List message posted by: "RK Hallett III" <n100rh@sbcglobal.net>
The BM says to remove the inter sheet of glass before laying up 3 layers of
BID for the tail wheel mount. My XS kit came with multi layers of peel
plied glass in this area. It appears ready to start making up the mount
without as the manual states, removing that inter layer. England is closed
for the day... so, anyone have a thought?
Thanks,
Ralph
Mono Motorglider
Reno
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|