---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sat 05/24/03: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 08:47 AM - Re: Re: Europa-List Digest: 15 Msgs - 05/21/03 (James H Nelson) 2. 11:00 AM - tail wheel mount (RK Hallett III) 3. 02:27 PM - Spar Pins (DvdPar@aol.com) 4. 03:43 PM - Re: Spar Pins (Kevin Klinefelter) 5. 03:43 PM - Re: tail wheel mount (Kevin Klinefelter) ________________________________ Message 1 _____________________________________ Time: 08:47:56 AM PST US Subject: Re: Europa-List: RE: Europa-List Digest: 15 Msgs - 05/21/03 From: James H Nelson --> Europa-List message posted by: James H Nelson Ed, Don't you just love the plutocrats( I think it describes them) and their babble. God help us in the colonies if WE let it get as bad as you have it. Jim Nelson N15JN ________________________________ Message 2 _____________________________________ Time: 11:00:58 AM PST US From: "RK Hallett III" Subject: Europa-List: tail wheel mount --> Europa-List message posted by: "RK Hallett III" The BM says to remove the inter sheet of glass before laying up 3 layers of BID for the tail wheel mount. My XS kit came with multi layers of peel plied glass in this area. It appears ready to start making up the mount without as the manual states, removing that inter layer. England is closed for the day... so, anyone have a thought? Thanks, Ralph Mono Motorglider Reno ________________________________ Message 3 _____________________________________ Time: 02:27:58 PM PST US From: DvdPar@aol.com Subject: Europa-List: Spar Pins --> Europa-List message posted by: DvdPar@aol.com Am I missing something?. The plans show one hard spring steel washer on the bushing on the sbd spar tip.. There are two washers in the kit ??. Doen the other end need one? ________________________________ Message 4 _____________________________________ Time: 03:43:38 PM PST US From: "Kevin Klinefelter" Subject: RE: Europa-List: Spar Pins --> Europa-List message posted by: "Kevin Klinefelter" On page 27-12 of my XS manual is fig. 10 showing where both 281315 washers go. And actually it's the spar cup, not the stbd. tip that one washer is attached to. Kevin -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com]On Behalf Of DvdPar@aol.com Subject: Europa-List: Spar Pins --> Europa-List message posted by: DvdPar@aol.com Am I missing something?. The plans show one hard spring steel washer on the bushing on the sbd spar tip.. There are two washers in the kit ??. Doen the other end need one? ________________________________ Message 5 _____________________________________ Time: 03:43:38 PM PST US From: "Kevin Klinefelter" Subject: RE: Europa-List: tail wheel mount --> Europa-List message posted by: "Kevin Klinefelter" Hi Ralph, Mine looked much the same as the rest of the inside of the fuselage, don't remember it looking like it was peel plied. I think the idea is to get rid of the foam, solid layups to handle the bolt and loads. Does it look like the foam sandwich is continuous through the area? Kevin -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com]On Behalf Of RK Hallett III Subject: Europa-List: tail wheel mount --> Europa-List message posted by: "RK Hallett III" The BM says to remove the inter sheet of glass before laying up 3 layers of BID for the tail wheel mount. My XS kit came with multi layers of peel plied glass in this area. It appears ready to start making up the mount without as the manual states, removing that inter layer. England is closed for the day... so, anyone have a thought? Thanks, Ralph Mono Motorglider Reno