---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sat 07/19/03: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:54 AM - Pitot - static question (Steve Hagar) 2. 11:31 AM - aileron mass balance (paul stewart) 3. 11:44 AM - Re: aileron mass balance (Cliff Shaw) 4. 01:00 PM - Re: aileron mass balance () 5. 02:07 PM - BBQ/Fly-in at Lydeway 2nd/3rd August (Nigel Charles) ________________________________ Message 1 _____________________________________ Time: 04:54:04 AM PST US From: "Steve Hagar" Subject: Europa-List: Pitot - static question --> Europa-List message posted by: "Steve Hagar" Are there any negatives or concerns to be aware of if going to a larger cross section tubing from what comes out of the wing? I am planning on going to a larger cross section Tygon tubing when these lines enter the fuselage. Steve Hagar A143 Mesa AZ --- Steve Hagar --- hagargs@earthlink.net ________________________________ Message 2 _____________________________________ Time: 11:31:58 AM PST US From: "paul stewart" Subject: Europa-List: aileron mass balance --> Europa-List message posted by: "paul stewart" Can anyone give a rough estimate of what proportion of the lead ends up being removed to balance the ailerons? Regards Paul Stewart #432 ________________________________ Message 3 _____________________________________ Time: 11:44:00 AM PST US From: "Cliff Shaw" Subject: Re: Europa-List: aileron mass balance --> Europa-List message posted by: "Cliff Shaw" Paul In my case LOTS. It depends a lot on how you mount the lead. I had to drill 3 half inch holes through each weigh . Cliff Shaw 1041 Euclid ave. Edmonds WA 98020 (425) 776-5555 N229WC "Wile E Coyote" > Can anyone give a rough estimate of what proportion of the lead endup being removed to balance the ailerons? > > Regards > > Paul Stewart #432 > > ________________________________ Message 4 _____________________________________ Time: 01:00:00 PM PST US From: Subject: Re: Europa-List: aileron mass balance --> Europa-List message posted by: I took out about half the lead...not easy to remove with a drill. I ended up using a rotary file. Ken Carpenter N9XS ----- Original Message ----- From: "Cliff Shaw" Subject: Re: Europa-List: aileron mass balance > --> Europa-List message posted by: "Cliff Shaw" > > Paul > > In my case LOTS. It depends a lot on how you mount the lead. I had to > drill 3 half inch holes through each weigh . > > Cliff Shaw > 1041 Euclid ave. > Edmonds WA 98020 > (425) 776-5555 > N229WC "Wile E Coyote" > > > Can anyone give a rough estimate of what proportion of the lead endup > being removed to balance the ailerons? > > > > Regards > > > > Paul Stewart #432 > > > > > > ________________________________ Message 5 _____________________________________ Time: 02:07:20 PM PST US From: "Nigel Charles" Subject: Europa-List: BBQ/Fly-in at Lydeway 2nd/3rd August --> Europa-List message posted by: "Nigel Charles" As mentioned before I have lost my e-mail address book and associated e-mails. This included my list of those of you booked in to my BBQ/Fly-in at Lydeway. Could those booked in (and those on the reserve list) please send me a short e-mail so that I can contact you with any last minute updates before the event. Thank you. Nigel Charles