Europa-List Digest Archive

Wed 07/23/03


Total Messages Posted: 6



Today's Message Index:
----------------------
 
     1. 02:48 AM - Re: New Tailwheel Ply inserts (Tony Renshaw)
     2. 05:09 AM - painting (paul stewart)
     3. 06:17 AM - Re: painting (Roger Anderson)
     4. 06:33 AM - Re: painting (K.Pilcher)
     5. 03:41 PM - europa spinner (Rowland & Wilma Carson)
     6. 07:39 PM - Re: europa spinner (DuaneFamly@aol.com)
 
 
 


Message 1


  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:48:41 AM PST US
    From: Tony Renshaw <tonyrenshaw@optusnet.com.au>
    Subject: Re: New Tailwheel Ply inserts
    --> Europa-List message posted by: Tony Renshaw <tonyrenshaw@optusnet.com.au> Ferg, I will ask them and see what they have to say, bouncing you a reply. Reg Tony Renshaw Sydney Australia At 09:46 AM 7/22/2003 -0400, you wrote: >--> Europa-List message posted by: "Fergus Kyle" <VE3LVO@rac.ca> > >> From: <tonyrenshaw@optusnet.com.au> >> To: <europa-list@matronics.com> >> Sent: Monday, July 21, 2003 11:08 PM >> Subject: Europa-List: New Tailwheel Ply inserts >> >> >> | --> Europa-List message posted by: tonyrenshaw@optusnet.com.au >> | >> | >> | gidday, >> | Some time ago I recall advice regarding the replacement, or substitution >> of the ply >> | inserts in the tailwheel setup due to compression forces squashing the >> ply. Is this >> | true of the new tailwheel setup, and if so, any advice as to what is a >> better >> | medium to use? No doubt a metal replacement would be possible, at the >> expense >> | of time in ease of shaping, and weight. I don't actually know if this is >a >> problem or >> | not. >> | Reg >> | Tony Renshaw >> | Sydney Australia >> >> Tony, >> I presume it's worry that the tailwheel spring is compressing >> the myriad layers in the rudder bulkhead? I recently saw where someone had >> added a stainless steel plate atop the entry of the spring to resist >forces >> in a heavy landing. Should we ask Nev and Graham? >> Ferg > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:09:02 AM PST US
    From: "paul stewart" <paul-d.stewart@virgin.net>
    Subject: painting
    --> Europa-List message posted by: "paul stewart" <paul-d.stewart@virgin.net> Not intending to paint ourselves - don't want to ruin all the hard work nor indeed get involved with two pack paints. Can anyone recommend any sprayers in the UK (even better around the midlands) with appropriate experience ? Regards Paul Stewart #432


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:17:34 AM PST US
    From: "Roger Anderson" <Randerson@skewstacks.freeserve.co.uk>
    Subject: Re: painting
    --> Europa-List message posted by: "Roger Anderson" <Randerson@skewstacks.freeserve.co.uk> Rob Millinship is an acknowledged pundit on painting. He painted G-BXTD (with a little help from myself!). His number is Nottingham (0115) 9290315. The only problem is that he is usually very busy. Roger. ----- Original Message ----- From: "paul stewart" <paul-d.stewart@virgin.net> Subject: Europa-List: painting > --> Europa-List message posted by: "paul stewart" <paul-d.stewart@virgin.net> > > Not intending to paint ourselves - don't want to ruin all the hard work nor indeed get involved with two pack paints. Can anyone recommend any sprayers in the UK (even better around the midlands) with appropriate experience ? > > Regards > > Paul Stewart #432 >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:33:08 AM PST US
    From: "K.Pilcher" <kpeng@waverider.co.uk>
    Subject: Re: painting
    --> Europa-List message posted by: "K.Pilcher" <kpeng@waverider.co.uk> Hi Paul Col Noakes At Colmart, done lots of Europa's and based at Wednesfield near Wolverhampton 01902 607695 Regards Kevin ----- Original Message ----- From: "paul stewart" <paul-d.stewart@virgin.net> Subject: Europa-List: painting > --> Europa-List message posted by: "paul stewart" <paul-d.stewart@virgin.net> > > Not intending to paint ourselves - don't want to ruin all the hard work nor indeed get involved with two pack paints. Can anyone recommend any sprayers in the UK (even better around the midlands) with appropriate experience ? > > Regards > > Paul Stewart #432 > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:41:54 PM PST US
    From: Rowland & Wilma Carson <rowil@clara.net>
    Subject: europa spinner
    --> Europa-List message posted by: Rowland & Wilma Carson <rowil@clara.net> Dave Watts left a Europa Classic spinner with me at Kemble for someone to pick up, but no-one did and I've forgotten who Dave said it belonged to. Dave seems to be off-air at present - anyone claim the spinner? regards Rowland -- | Rowland Carson Europa Club Membership Secretary | Europa 435 G-ROWI (580 hours building) PFA #16532 EAA #168386 | e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:39:15 PM PST US
    From: DuaneFamly@aol.com
    Subject: Re: europa spinner
    --> Europa-List message posted by: DuaneFamly@aol.com If it has constant speed prop and 912S attached to it, then it's mine. Mike Duane A207 Redding, California XS Trigear




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --