Europa-List Digest Archive

Sat 08/09/03


Total Messages Posted: 9



Today's Message Index:
----------------------
 
     1. 12:41 AM - Re: What type of epoxy/mix? (paul stewart)
     2. 03:21 AM - Stress Analysis/Barry Mellers ???????????? (Tony Renshaw)
     3. 06:48 AM - FW: Stress Analysis/Barry Mellers ???????????? (R.C.Harrison)
     4. 09:59 AM - Re: door latch covers (nigelcharles@tiscali.co.uk)
     5. 02:23 PM - Fw: WMC2003.Long Marston (Rowland & Wilma Carson)
     6. 02:23 PM - boxted fly-in (suffolk) 30 & 31 aug (Rowland & Wilma Carson)
     7. 02:23 PM - Re: Any builders in the Melbourne area? (Rowland & Wilma Carson)
     8. 02:23 PM - Fw: Edinburgh Festival Fly-in 22/23 Aug (Rowland & Wilma Carson)
     9. 02:23 PM - Fw: Guernsey Rally 12th - 14th September (Rowland & Wilma Carson)
 
 
 


Message 1


  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:41:04 AM PST US
    From: "paul stewart" <paul-d.stewart@virgin.net>
    Subject: Re: What type of epoxy/mix?
    --> Europa-List message posted by: "paul stewart" <paul-d.stewart@virgin.net> Ron Others have replied about which epoxy. Suggest not filling the joggles until you get to surface filling the whole rudder/tabs etc. We ended up using another filling product (superfill) having already filled the joggles with expancel and resin - they don't sand the same so we ended up sanding the joggle fill out and starting again with superfill. Regards Paul Stewart #432 ----- Original Message ----- From: "Ronald J. Parigoris" <rparigor@suffolk.lib.ny.us> Subject: Europa-List: What type of epoxy/mix? > --> Europa-List message posted by: "Ronald J. Parigoris" <rparigor@suffolk.lib.ny.us> > > Finally getting going on A-265 Monowheel > > Have a few epoxy questions: > > What type of epoxy is needed to bond hinges on Rudder and Anti-servo tabs? > Manual calls for Epoxy and Flox for Rudder, and Rapid Epoxy and Flox for > Anti-servo tabs. Is the manual correct? > > What sort of fill is used to fill in the joggle on the back of the rudder? Is > Dry Micro OK? > The manual shows filling in a similar joggle on the anti-servo tabs with Dry > Micro, but it gets a strip on top of it. > > Thanks > Ron Parigoris > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:21:07 AM PST US
    From: Tony Renshaw <tonyrenshaw@optusnet.com.au>
    Subject: Stress Analysis/Barry Mellers ????????????
    --> Europa-List message posted by: Tony Renshaw <tonyrenshaw@optusnet.com.au> Gidday, I am after contact details for Barry Mellers and was hoping someone in the UK could help me. He was recommended by Andy at Europa for structural analysis mod work etc. I anticipate putting a single, largish access on the floor of the fuse on the longitudinal axis, between the rudder pedal pulleys, and need his guidance. Anyone knowing his whereabouts please?? Reg Tony Renshaw


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 06:48:53 AM PST US
    From: "R.C.Harrison" <ptag.dev@ukonline.co.uk>
    Subject: Stress Analysis/Barry Mellers ????????????
    --> Europa-List message posted by: "R.C.Harrison" <ptag.dev@ukonline.co.uk> Tony your dashed server is saying that your post box is over quota. You have a bloody problem somewhere? Bob. -----Original Message----- From: R.C.Harrison [mailto:ptag.dev@ukonline.co.uk] Subject: RE: Europa-List: Stress Analysis/Barry Mellers ???????????? Hi! Tony . Herewith Barry's contact details as requested, great chap he did all my technical work especially on my CS propeller /Crank shaft mod. and access panels through the firewall to the instrument panel. Barry Mellers Fairoak House Barnoldswick Road Balckburn Lancs BB9 6RG United Kingdom Tel:- 0044 1282612985 E-Mail .....mellers@totalise.co.uk Tony did you get my messages concerning the torque tube clamps? Regards Bob Harrison G-PTAG -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com]On Behalf Of Tony Renshaw Subject: Europa-List: Stress Analysis/Barry Mellers ????????????


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:59:01 AM PST US
    From: nigelcharles@tiscali.co.uk
    Subject: Re: door latch covers
    --> Europa-List message posted by: nigelcharles@tiscali.co.uk >I am bonding the plates in place but cutting a hole where the door handle bolt head is located. I used a nut plat in the outside handle before bonding wood on and figure if i need in there for anyother reason I will just cut it and do it again. The hole will alow me to take the outside handle off or to squirt in some lubrication. Maby I will just put in a removable plug to cover it.< The manual calls for the plates to be bonded. I suspect that this is to ensure adequate strength is achieved. I did exactly as Jeff mentioned above by drilling a 1" hole and fitting a 1" blind grommet. This leaves a neat finish and enables access to remove the handle if required. Nigel Charles


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:23:18 PM PST US
    From: Rowland & Wilma Carson <rowil@clara.net>
    Subject: Fwd: WMC2003.Long Marston
    --> Europa-List message posted by: Rowland & Wilma Carson <rowil@clara.net> Following notice forwarded via Europa Club Membership Secretary: >From: "Brian Barrass" <brian@mwflyer.co.uk> >Subject: WMC2003.Long Marston >Date: Fri, 8 Aug 2003 12:46:27 +0100 > >The British Microlight Aircraft Association presents the the 9th FAI >World Microlight Championship and the 3rd FAI World PPG Championship >to be held at Long Marston Airfield near Stratford-upon-Avon in >Warwickshire between 23 and 31 August 2003. Around 160 of the >world's top competition pilots will be competing for the title of >World Champion in seven microlight classes, including, for the first >time ever, single and two seat powered parachutes (PPT's). > >Teams may start arriving at the site from Monday 18 August. The >event will start on Saturday 23 August with the opening ceremony, a >fly in, an air display, a ground exhibition and a trade fair. > >There are several ways you can participate in this event. You can >simply fly or drive in to enjoy the spectacle and see the aircraft. >Or you can volunteer to help as a marshal during the week of the >competition. If you are a manufacturer or importer you can display >your products and arrange test flights at the opening and closing >ceremonies and throughout the week. And if you are a past or >aspiring international competitor you can participate in the BMAA >National Championships and win a place in the British Team to >compete in WMC2003. > >The pre-registration web site for all team members is >www.flymicro.com/COMPS As an incentive for this to be done properly, >all those who have correctly pre-registered will automatically be >entered in a draw for two GNSS flight recorders. > >Contact > >Event Director: Keith Negal keith@negal.com > >Classic classes & PL2 Director: Rob Keene rob@overfarm.freeserve.co.uk > >PPG & PL1 Director: Richard Meredith-Hardy rmh@flymicro.com > >http://www.wmc2003.org/index.cfm regards Rowland -- | Rowland Carson Europa Club Membership Secretary | Europa 435 G-ROWI (580 hours building) PFA #16532 | e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:23:18 PM PST US
    From: Rowland & Wilma Carson <rowil@clara.net>
    Subject: boxted fly-in (suffolk) 30 & 31 aug
    --> Europa-List message posted by: Rowland & Wilma Carson <rowil@clara.net> I've received a PDF poster about the Boxted fly-in (2003 08 30 & 31) which I can't post to this forum. For details & PPR please phone 01206 231304 or e-mail <tracey@polehouse.co.uk>. regards Rowland -- | Rowland Carson Europa Club Membership Secretary | Europa 435 G-ROWI (580 hours building) PFA #16532 | e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:23:18 PM PST US
    From: Rowland & Wilma Carson <rowil@clara.net>
    Subject: Re: Any builders in the Melbourne area?
    --> Europa-List message posted by: Rowland & Wilma Carson <rowil@clara.net> At 2003 08 08 08:30 +0200, Alexander P. de C. Kaarsberg wrote: >I am in Melbourne on business until the end of August, I would like >to see if there are any Europa builders in the area Alex - there is only one I know of in Melbourne itself, but about 10 altogether in the state of Victoria. John Anselmi 430 John Bampfylde 130 VH-JXN Tony Baxter 410 Allan Bowden 200 19-3248 Francis Connell 262 19-3084 Nigel Hutchinson-Brooks 423 David Matuschka 429 Lance Sandford 471 Arthur Stubbs 424 VH-XSI Brian Waldron 127 VH-BWI The only current Club member among them is John Bampfylde (thus I can let you have his details if you haven't got your member list handy) - the others have either lapsed or never joined (thus I'm not permitted to release any of their details). regards Rowland -- | Rowland Carson Europa Club Membership Secretary | Europa 435 G-ROWI (580 hours building) PFA #16532 | e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:23:18 PM PST US
    From: Rowland & Wilma Carson <rowil@clara.net>
    Subject: Fwd: Edinburgh Festival Fly-in 22/23 Aug
    --> Europa-List message posted by: Rowland & Wilma Carson <rowil@clara.net> Following notice forwarded via Europa Club Membership Secretary: >From: "Ian Wales" <ian@ianwales.flyer.co.uk> >Subject: Edinburgh Festival Fly-in 22/23 Aug >Date: Fri, 8 Aug 2003 12:14:40 +0100 > >From the East of Scotland Strut > >Attached is information for this year's Festival Fly-in at East >Fortune on Friday 22nd/Sat 23rd August. > >It would be great if you could pass this on to as many as possible. > >This event has been good fun in the past, and we hope to see you all >there. Entry to the Museum of Flight will be free to all visiting >aircrew. > >We'll be having a Ceilidh on Friday 22nd (dancing from 8pm) with a >cash bar and Barbeque from 7pm, and if you would like to reserve a >ticket (7.00) give me a call by any of the methods below, or call >Tim Rayner (0131 443 3807) or Jim Oliver (01620 850 375) > >Regards > >Ian Wales >Coordinator, East of Scotland Strut, PFA. > >14 Albert Terrace, Edinburgh EH10 5EA >Tel: 0131 447 5916, Fax: 0131 446 9376, Mob 0780 194 7726 >ianwales@flyer.co.uk Ian sent me a GIF which I can't attach to messages here, but I'm sure he would be happy to let you have a copy if you contact him direct. regards Rowland -- | Rowland Carson Europa Club Membership Secretary | Europa 435 G-ROWI (580 hours building) PFA #16532 | e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:23:18 PM PST US
    From: Rowland & Wilma Carson <rowil@clara.net>
    Subject: Fwd: Guernsey Rally 12th - 14th September
    --> Europa-List message posted by: Rowland & Wilma Carson <rowil@clara.net> Following notice forwarded via Europa Club Membership Secretary: >From: "Guernsey Air Rally" <rally@guernseyaeroclub.com> >To: europa-club@rowil.clara.net >Subject: 12th - 14th September >Date: Fri, 8 Aug 2003 00:11:39 +0100 > >This to remind contacts met at previous PFA rallies that the dates >of the Guernsey Air Rally this year are 12th - 14th September 2003 >For early arrivals there is the Battle of Britain air display on >Thursday including the Red Arrows >Then there is the optional navigation competion starting in Dinard >on Friday 12th September, or fly in direct for a great reception. >Dont miss the hangar ball party on Saturday night, live music, spit >roast, fancy dress theme '100 years of flight' >Please check our website at www.guernseyaeroclub.com/rally or >contact the club for more details >Please note transponders are not required during the rally period >- and it is really not that far across the water!! > >Colin Ferbrache - Rally Director > >Mark Dravers - Navex and website > >Brent Baigent - Club Manager tel. 01481 265267 (from outside UK +44 >1481 265267) fax 01481 263830 > >EMAIL : rally@guernseyaeroclub.com regards Rowland -- | Rowland Carson Europa Club Membership Secretary | Europa 435 G-ROWI (580 hours building) PFA #16532 | e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --