---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Fri 12/26/03: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:36 AM - Re: Bing 64 Carb and Altitude Compensation (Miles McCallum) 2. 08:06 AM - Address change (DJA727@aol.com) 3. 11:37 AM - 'bid, anybody know offhand what..... (TELEDYNMCS@aol.com) 4. 12:39 PM - Matronics Internet Connection Repaired!! (Matt Dralle) 5. 12:55 PM - Tachometer connection for 914 to EIS (Paul McAllister) 6. 06:36 PM - Re: 'bid, anybody know offhand what..... (Cliff Shaw) ________________________________ Message 1 _____________________________________ Time: 04:36:50 AM PST US From: "Miles McCallum" Subject: Re: Europa-List: Bing 64 Carb and Altitude Compensation --> Europa-List message posted by: "Miles McCallum" > > Of course, the answer is fuel injection - there's a perfect bit of kit out > > there, made by Weber, as used on Ducati m/cs etc - fully programmable (but > > you need the bit of kit and software to do it) see: > > http://www.fuelinmoto.com.au/ > > > > Miles > > > > > Has anyone ever fitted fuel injection to a Rotax? > > Jeff Not that I know of - but our Rotax agent has the kit, but not had the time to fit it and dial it in. M ________________________________ Message 2 _____________________________________ Time: 08:06:22 AM PST US From: DJA727@aol.com Subject: Europa-List: Address change --> Europa-List message posted by: DJA727@aol.com Hello Fellow Europa builders! For those who would wish to contact me, I am changing my email address. This one will be inop as soon as I can get this squared away with the new one. The new one is: dja767@charter.net We are entering the high speed age! Cheers, Dave Anderson A227 Mini U2 137 hours and counting ________________________________ Message 3 _____________________________________ Time: 11:37:52 AM PST US From: TELEDYNMCS@aol.com Subject: Europa-List: 'bid, anybody know offhand what..... --> Europa-List message posted by: TELEDYNMCS@aol.com Greetings, Does anybody know the weight of the 'bid supplied with the kit? I've looked all over the manual and it doesn't specify. I'm almost out and I need to order some more, along with a few other things from ACS. Thanks! Regards, John Lawton Dunlap, TN A-245 (Today: Vacuum bagging baggage bay supports and final installation and glassing of the tie bar) Completed so far: Wings - closed, incidence set, ailerons, flaps and wings ready to start finish process. Fuselage - CM installed, TP torque tube, mass balance and trim installed. Flap actuator installed. Landing gear installed. Overhead console and conduit finished. Center console cut-a-way complete. Panel - Flight instruments mounted, then removed and ready for paint ________________________________ Message 4 _____________________________________ Time: 12:39:49 PM PST US From: Matt Dralle Subject: Europa-List: Matronics Internet Connection Repaired!! --> Europa-List message posted by: Matt Dralle Dear Listers, The phone company was out here bright and early this morning and repaired the wires and the T1 connection is back up and rock solid! Again my apologies for any inconvenience the disruption may have caused. Best regards, Matt Dralle Matronics Email List Admin. Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft do not archive ________________________________ Message 5 _____________________________________ Time: 12:55:21 PM PST US From: "Paul McAllister" Subject: Europa-List: Tachometer connection for 914 to EIS --> Europa-List message posted by: "Paul McAllister" Hi all, I was wondering if someone out there who has connected an EIS to a 914 can help with the tachometer connection. The Grand Rapids manual show a generic 912/914 connection, however when looking in the 914 installation manual it shows two wires from the TCU for the tachometer. Is this what is used for the EIS or is it done differently. ? Thanks, Paul ________________________________ Message 6 _____________________________________ Time: 06:36:29 PM PST US From: "Cliff Shaw" Subject: Re: Europa-List: 'bid, anybody know offhand what..... --> Europa-List message posted by: "Cliff Shaw" John The glass is a little bit different than regular glass. It is a "skip" weave. I did not fine it in the ACS catalog. Call John at Lakeland, I thing he has it for sale. Cliff Shaw 1041 Euclid ave. Edmonds WA 98020 (425) 776-5555 N229WC "Wile E Coyote" New Email:" flyinggpa@comcast.net " ----- Original Message ----- From: Subject: Europa-List: 'bid, anybody know offhand what..... > --> Europa-List message posted by: TELEDYNMCS@aol.com > > Greetings, > > Does anybody know the weight of the 'bid supplied with the kit? I've looked > all over the manual and it doesn't specify. I'm almost out and I need to order > some more, along with a few other things from ACS. > > Thanks! > > Regards, > > John Lawton > Dunlap, TN > A-245 (Today: Vacuum bagging baggage bay supports and final installation and > glassing of the tie bar) > > Completed so far: > > Wings - closed, incidence set, ailerons, flaps and wings ready to start > finish process. > Fuselage - CM installed, TP torque tube, mass balance and trim installed. > Flap actuator installed. Landing gear installed. Overhead console and conduit > finished. Center console cut-a-way complete. > Panel - Flight instruments mounted, then removed and ready for paint > >