---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sat 01/10/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:01 AM - Re: Mono wheel position (Jim Butcher) 2. 02:58 AM - Re: Mono-Wheel Retracted Position (Kingsley Hurst) 3. 08:06 AM - Re: Drop of the Hat Fly-ins W/C 12-01-04 (RMRRick@aol.com) 4. 09:09 AM - Re: Mono-Wheel Retracted Position (Kevin Klinefelter) ________________________________ Message 1 _____________________________________ Time: 12:01:15 AM PST US From: "Jim Butcher" Subject: Re: Europa-List: Mono wheel position --> Europa-List message posted by: "Jim Butcher" batfar ----- Original Message ----- From: Subject: Re: Europa-List: Mono wheel position > Your email message was temporarily blocked by my spam > filter. If you feel this is an error, please follow > these instructions. > > The attached image contains a password. > Reply to this email and enter the password > in the subject or body of your reply. > > Thank you. > ____________________________________________________ > This email account is protected with Spam Bully. > www.spambully.com > > --> Europa-List message posted by: "Jim Butcher" > > Our experience is that the LG02 is pretty much flush with the bottom of the > fuselage. If its any higher the tire will hit the brake master cylinder. > Be sure to check the clearance of the tire to the master cylinder before you > go about setting the flap acutation horn FL21 because any change in the LG02 > position will affect the flap position (voice of experience). Neville gave > us some good tips on setting FL21 but I didn't write them down. Seems like > he had us reverse the procedure, ie start with flaps up and adjust the horn > for flaps down position. Check with him since the book procedure didnt seem > to work! > > Jim & Heather A185 > starting smooth prime > XS 914 mono short wings now > > ________________________________ Message 2 _____________________________________ Time: 02:58:20 AM PST US From: "Kingsley Hurst" Subject: Re: Europa-List: Mono-Wheel Retracted Position --> Europa-List message posted by: "Kingsley Hurst" "Kevin Klinefelter" write :- > If in the future you ever decide to install a wheel fairing, you will be > glad that the swingarm is flush with the fuse bottom. > Why do you say this Kevin ? Regards Kingsley Hurst Mono Classic 281 in Oz Elect Wiring, Engine installation, F&S and painting still to go plus ??? ________________________________ Message 3 _____________________________________ Time: 08:06:05 AM PST US From: RMRRick@aol.com Subject: Re: Europa-List: Drop of the Hat Fly-ins W/C 12-01-04 --> Europa-List message posted by: RMRRick@aol.com Hi all Well, Wolverhampton was fun if a bit of a challenge due to the weather. A lovely, friendly place now with very helpful RT and a truly magnificent cafe. =A32.50 for a splendid lunch! Incidentally we put the nose down slightly on the way back and saw a GPS ground speed of 185 knots. Next week is Thruxton unless anyone knows a good reason not to. The start of the week looks grim but lets say provisionally Wednesday. The free landing fee is in Pilot. Hope to see a few of you there. Regards Rick Morris G-RIKS ________________________________ Message 4 _____________________________________ Time: 09:09:56 AM PST US From: "Kevin Klinefelter" Subject: RE: Europa-List: Mono-Wheel Retracted Position --> Europa-List message posted by: "Kevin Klinefelter" I bought Kim Prout's wheel fairing. The forward half of the fairing, attached to the swingarm, has flanges on the sides that fit flush to the fuse in the retract position. Its easiest to install the fairing flat up against the swingarm which puts the fairing flange flush with the fuse bottom. BTW, Steve Hagar's mono up stop sure works well. Kevin -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com]On Behalf Of Kingsley Hurst Subject: Re: Europa-List: Mono-Wheel Retracted Position --> Europa-List message posted by: "Kingsley Hurst" "Kevin Klinefelter" write :- > If in the future you ever decide to install a wheel fairing, you will be > glad that the swingarm is flush with the fuse bottom. > Why do you say this Kevin ? Regards Kingsley Hurst Mono Classic 281 in Oz Elect Wiring, Engine installation, F&S and painting still to go plus ???