---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sat 01/31/04: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 07:16 PM - Oil breather (Paul McAllister) 2. 07:50 PM - Re: Oil breather (Cliff Shaw) 3. 11:25 PM - Tailwheel tire (Ronald J. Parigoris) ________________________________ Message 1 _____________________________________ Time: 07:16:43 PM PST US From: "Paul McAllister" Subject: Europa-List: Oil breather --> Europa-List message posted by: "Paul McAllister" Hi all, I was wondering if anyone has tried using a bottle to catch the oil from the breather. Does the oil condense in the bottle okay ? Thanks, Paul ________________________________ Message 2 _____________________________________ Time: 07:50:14 PM PST US From: "Cliff Shaw" Subject: Re: Europa-List: Oil breather --> Europa-List message posted by: "Cliff Shaw" Paul If you are using a Rotax, there is NO oil coming out the breather. It only vent hot air and equalizes the air pressure. ( Rotax don't use oil) Cliff Shaw 1041 Euclid ave. Edmonds, WA 98020 425 776 5555 ----- Original Message ----- From: "Paul McAllister" Subject: Europa-List: Oil breather > --> Europa-List message posted by: "Paul McAllister" > > Hi all, > > I was wondering if anyone has tried using a bottle to catch the oil from the breather. Does the oil condense in the bottle okay ? > > Thanks, Paul > > ________________________________ Message 3 _____________________________________ Time: 11:25:46 PM PST US From: "Ronald J. Parigoris" Subject: Europa-List: Tailwheel tire --> Europa-List message posted by: "Ronald J. Parigoris" Anyone using a different tire for the tailwheel other than the 6 inch Aircraft Spruce one provided? Anyone try the sealed bearings Aircraft Spruce sells? Anyone try to grind the tire so it tracks round? Like put it in a lathe and go after it with a 3 inch air sander? Ron Parigoris