---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 02/26/04: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 05:38 PM - Test message (Cliff Shaw) 2. 06:18 PM - Re: Test message (Paul McAllister) 3. 07:18 PM - Re: Test message (Cliff Shaw) 4. 11:27 PM - Re: Test message (William Mills) ________________________________ Message 1 _____________________________________ Time: 05:38:42 PM PST US From: "Cliff Shaw" Subject: Europa-List: Test message --> Europa-List message posted by: "Cliff Shaw" All I have not recieved EUROPA Email all day. Is this net working? do not archive Cliff Shaw 1041 Euclid ave. Edmonds, WA 98020 425 776 5555 ________________________________ Message 2 _____________________________________ Time: 06:18:50 PM PST US From: "Paul McAllister" Subject: Re: Europa-List: Test message --> Europa-List message posted by: "Paul McAllister" Cliff, Yes the forum is working, and now that I have your attention..... I recall that you had a pad welded on the side of your water manifold. Can you tell me the if it was TIG welded or Brazed and the type and thickness of aluminum did you use as the pad. Thanks, Paul do not archive. ________________________________ Message 3 _____________________________________ Time: 07:18:20 PM PST US From: "Cliff Shaw" Subject: Re: Europa-List: Test message --> Europa-List message posted by: "Cliff Shaw" It is good to hear for you. Yes, I did put a little pad on the side of the water reservoir, aft port side. I made it from 6061 alum. and taped a 1/8" pipe thread in it so the thermometer sensor would thread into it. I had a welding shop weld it on . The alum reservoir is very thin so I felt I needed an expert do the job. It looks like ark welding so it would have to be TIG . I really don't know. It works! Cliff Shaw 1041 Euclid ave. Edmonds, WA 98020 425 776 5555 ----- Original Message ----- From: "Paul McAllister" Subject: Re: Europa-List: Test message > --> Europa-List message posted by: "Paul McAllister" > > Cliff, > > Yes the forum is working, and now that I have your attention..... I recall > that you had a pad welded on the side of your water manifold. Can you tell > me the if it was TIG welded or Brazed and the type and thickness of aluminum > did you use as the pad. > > Thanks, Paul > > do not archive. > > ________________________________ Message 4 _____________________________________ Time: 11:27:57 PM PST US From: "William Mills" Subject: Re: Europa-List: Test message --> Europa-List message posted by: "William Mills" I received your test message, Cliff William (Do not archive) ----- Original Message ----- From: "Cliff Shaw" Subject: Europa-List: Test message > --> Europa-List message posted by: "Cliff Shaw" > > All > > I have not recieved EUROPA Email all day. Is this net working? > > do not archive > > Cliff Shaw > 1041 Euclid ave. > Edmonds, WA 98020 > 425 776 5555 > >