Today's Message Index:
----------------------
1. 12:02 AM - Re: Aerobatics (Pete Lawless)
2. 08:32 AM - Re: Windscreen Conduits (TELEDYNMCS@aol.com)
3. 01:36 PM - europa club subs (Rowland Carson)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Europa-List message posted by: "Pete Lawless" <pete@lawless.info>
I remember it well watched Pete Clark perform at Oshkosh.
Pete
Do not archive
---
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Windscreen Conduits |
--> Europa-List message posted by: TELEDYNMCS@aol.com
In a message dated 5/9/2004 7:48:37 AM Eastern Daylight Time,
tonyrenshaw@optusnet.com.au writes:
> I am working on my top, and am wondering if this is a good time to install
> a conduit forward of the door rebate and behind the windscreen. I know for
> ease of work this is the right time, and am wondering what ideas people
> have. I haven't checked the manual, but I believe the windscreen flange is
> cut back to 20 mm, or thereabouts, so I suppose I have as much as that to
> play with, considering I also need a small amount of flange remaining
> uncovered to attach trim to. So, any suggestions, please???
>
> Hi Tony,
>
> I used 1/2" black irrigation pipe for conduits around the windsheild. They
> will allow wiring to route up to my overhead console where I have placed
> switches for Nav lights, landing light, interior lights, etc. They will intersect
> with conduits I'm installing along both sides of the cockpit under the doors.
> The horizontal conduit's also strengthen the door sils.
>
> I cut the pipe to length, scuffed it with 60 grit and clamped it in place.
> Using "dry" micro, I filled the gap around both sides of the conduit and used
> a spoon to get a nice rounded (concave) shape between the top molding and the
> pipe, then peel plyed and let cure. Then, I put on 2 layers of 'bid, peel
> plyed and let that cure, then trimmed the edges. I made a custom slot in the
> center to hold the forward edge of my (removable) overhead console panel. The
> result was better than I'd hoped for and it really stiffened the frame around
> the window.
>
> Contact me off list if you'd like to see some pictures.
>
> Regards,
>
> John Lawton
> Dunlap, TN
> A-245
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | europa club subs |
--> Europa-List message posted by: Rowland Carson <rowil@clara.net>
Quite a few people have not yet renewed their Europa Club membership
for 2004/2005. I've just discovered that some members did not receive
a renewal reminder form with their copy of the March 2004 Europa
Flyer (#40). We will be investigating with our printing firm how this
could have happened.
If you think you haven't renewed for any reason, please take a look
at your cheque stubs or credit card bill for that item of 15 pounds.
If you're still not sure, please contact me to arrange payment or
otherwise relieve your feelings of guilt.
And for those who paid twice (because they forgot about their
standing order) - I am organising refunds for you all.
regards
Rowland
--
| Rowland Carson Europa Club Membership Secretary - email for info!
| Europa 435 G-ROWI (670 hours building) PFA #16532
| e-mail <memsec@europaclub.org.uk> website <www.europaclub.org.uk>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|