Europa-List Digest Archive

Sun 08/01/04


Total Messages Posted: 9



Today's Message Index:
----------------------
 
     1. 12:49 AM - Re: bad e-mail addresses (R.C.Harrison)
     2. 07:25 AM - Re: Aluminum Vents Sale (Ken Stribling)
     3. 08:12 AM - Re: Aluminum Vents Sale (xs191@comcast.net)
     4. 08:44 AM - Long Range Tank Pics (rlborger)
     5. 10:52 AM - Re: Aluminum Vents Sale ()
     6. 12:09 PM - A bit of light relief (Simon Smith)
     7. 12:39 PM - "Advertising" on the Lists... (Matt Dralle)
     8. 01:57 PM - Re: A bit of light relief (Jeremy Davey)
     9. 11:43 PM - Official Usage Guideline [Please Read] [Monthly Posting] (Matt Dralle)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:49:49 AM PST US
    From: "R.C.Harrison" <ptag.dev@ukonline.co.uk>
    Subject: Re: bad e-mail addresses
    --> Europa-List message posted by: "R.C.Harrison" <ptag.dev@ukonline.co.uk> Hi! Rowland. I have Jacks address as :- jac.vanheeswijk@hetnet.nt However he is in America at present so his mail box may be full, he is aware of the situation and I know he needs an engine mount at least. I have Peter Austins address as:- p-a.austin@xtra.co.nz he communicated with me quite recently so it should be good. Don't know any of the others. Regards Bob Harrison G-PTAG ----- Original Message ----- From: "Rowland Carson" <rowil@clara.net> Subject: Europa-List: bad e-mail addresses > --> Europa-List message posted by: Rowland Carson <rowil@clara.net> > > I tried to contact the following Europa Club members by e-mail, but > got bounce messages. > > Peter & Anthea Austin > Philippe Dufey & Florence Ottesen > Luis Roberto Fernandez > Ian Mansfeld & Frances Fiore > Anthony & Marieke van Eldik > Jack Van Heeswijk > > If any of you are listening here, please contact me direct at > <memsec@europaclub.org.uk> to re-establish communication. Don't make > us spend money on stamps! > > do not archive > > regards > > Rowland > -- > > >


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:25:59 AM PST US
    From: "Ken Stribling" <ken@striblingranch.com>
    Subject: Aluminum Vents Sale
    --> Europa-List message posted by: "Ken Stribling" <ken@striblingranch.com> I don't know about you but as long as it is not every day little hints like this help to expand my data base of places to look for plane parts. Ken S. A-282 missing doors windows and cowling ;<( -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul Boulet Subject: Re: Europa-List: Aluminum Vents Sale --> Europa-List message posted by: Paul Boulet <possibletodo@yahoo.com> Correct me if I'm wrong but I think it violates protocol to do commercial advertising on this web site... at the very least it's in bad form. Just my 2 cents Paul Boulet, N914PB Fabian Lefler <fablef@bellsouth.net> wrote: --> Europa-List message posted by: "Fabian Lefler" I am overstocked with Black Anodized Aluminum Vents, so for the month of August, I will offer these at $199.00 with free shipping. Regular Price is $235.00 with a $10.00 shipping charge. These vents are the same size as Van's plastic vents including the mounting holes. Our black anodized vents are unique in that we made the eyeball and mechanism of out aluminum, but the flanges are plastic so that the corners can be rounded off, just like Van's, and not expose the clear aluminum. You can see the vents here: http://www.affordablepanels.com/aluminum_vents_files/IM001220.JPG You can order the vents here: http://www.affordablepanels.com/aluminum_vents.htm This special is only available during this month, or until I run out of vents. Regards, Fabian == == == ==


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:12:20 AM PST US
    From: xs191@comcast.net
    Subject: Re: Aluminum Vents Sale
    --> Europa-List message posted by: xs191@comcast.net Paul I rarely get vocal about these sorts of issues, but in this case I will contribute my thoughts. I completely agree with you and disagree with Ken. These lists are no place for a commercial. I agree with Ken that getting information about a possible parts source is beneficial, but I regard ANY commercial entry to the list as SPAM. Perhaps there could be a location on the list similar to the photo share area, where folks can place such information. Jeff > --> Europa-List message posted by: Paul Boulet <possibletodo@yahoo.com> > > Correct me if I'm wrong but I think it violates protocol to do commercial > advertising on this web site... at the very least it's in bad form. > > Just my 2 cents > > Paul Boulet, N914PB >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:44:52 AM PST US
    Subject: Long Range Tank Pics
    From: rlborger <rlborger@mac.com>
    --> Europa-List message posted by: rlborger <rlborger@mac.com> Ferg, Not to worry. It turns out that Apple has changed the way my public files can be accessed. I have to setup and publish a home page now. You have provided me the impetus to set up my home page. This "should" provide you reasonable access to those pics. Go to http://homepage.mac.com/rlborger At the top of this page you will see two headings: Introduction and iDisk Public Folder (Graphite) You are in the Introduction page. Click on the IDisk page header and that will take you to my iDisk Public Folder. You will see two folders: BIG pics and small pics. Click on the small pics folder. You will get a list of pic files. Click on the preview eye icon to see a preview of the pic. Click on the download icon to download a copy of the pic. Use the drop-down menu to go back up to the Public Folder. The BIG pic Folder only has a single pic. It is the full sized pic of the all the parts. It is of a resolution that will allow you to read the individual parts numbers off the bags. You can go to this folder and download that image as well if you wish. I have tried this out and it seems to work. Now I need to fix up my home page, clean up some odd and ends and see what else I need to do before I move out and start work on the flap drive system. Good building and great flying, Bob Borger Europa Kit #A221 N914XL, XS Mono, 914, Airmaster C/S http://forum.okhuijsen.org/N914XL (75%) tail kit done, wings closed, cockpit module installed, pitch system in, landing gear frame in, rudder system in, outrigger mod in, Fuselage Top on, lift/drag/flap pins in, wing incidence set. Working in - 24 Instrument Panel, 25 Electrical, 27 Setting Wings, 29 Main Gear, 30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors. 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:52:31 AM PST US
    From: <fablef@bellsouth.net>
    Subject: Re: Aluminum Vents Sale
    --> Europa-List message posted by: <fablef@bellsouth.net> To those that were so easily offended by the posting, my apologies. To be quite honest that posting was supposed to go to the RV-list only. It just so happens that I didn't take the time to sort the recipients as well as I should have. However, let me say this... I have been in business for three years and this is only the second posting (business related) I have placed to the list. A commercial benefit is questionable since I am offering these at cost, but doesn't the person who buys one benefit from the savings? Ultimately, that is you, the builder. Please, please ignore my previous posting. Fabian ----- Original Message ----- From: "Ken Stribling" <ken@striblingranch.com> Subject: RE: Europa-List: Aluminum Vents Sale > --> Europa-List message posted by: "Ken Stribling" <ken@striblingranch.com> > > I don't know about you but as long as it is not every day little hints > like this help to expand my data base of places to look for plane parts. > > Ken S. > A-282 missing doors windows and cowling ;<( > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul Boulet > To: europa-list@matronics.com > Subject: Re: Europa-List: Aluminum Vents Sale > > --> Europa-List message posted by: Paul Boulet <possibletodo@yahoo.com> > > Correct me if I'm wrong but I think it violates protocol to do > commercial advertising on this web site... at the very least it's in bad > form. > > Just my 2 cents > > Paul Boulet, N914PB > > Fabian Lefler <fablef@bellsouth.net> wrote: > --> Europa-List message posted by: "Fabian Lefler" > > I am overstocked with Black Anodized Aluminum Vents, so for the month of > August, I will offer these at $199.00 with free shipping. Regular Price > is $235.00 with a $10.00 shipping charge. > > These vents are the same size as Van's plastic vents including the > mounting holes. Our black anodized vents are unique in that we made the > eyeball and mechanism of out aluminum, but the flanges are plastic so > that the corners can be rounded off, just like Van's, and not expose the > clear aluminum. > > You can see the vents here: > http://www.affordablepanels.com/aluminum_vents_files/IM001220.JPG > > You can order the vents here: > http://www.affordablepanels.com/aluminum_vents.htm > > This special is only available during this month, or until I run out of > vents. > > Regards, > > Fabian > > > == > == > == > == > >


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:09:48 PM PST US
    From: "Simon Smith" <jodel@nildram.co.uk>
    Subject: A bit of light relief
    --> Europa-List message posted by: "Simon Smith" <jodel@nildram.co.uk> Hi all, To put us all in a good mood again, I propose a caption competition. The photo is at http://www.todayspilot.co.uk/tp_rally/large/IMG_9827.jpg There is no prize but I thought it might raise a smile! Simon 504 G-BZTN


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:39:17 PM PST US
    rv8-list@matronics.com, rv9-list@matronics.com, europa-list@matronics.com, glasair-list@matronics.com, lancair-list@matronics.com, rocket-list@matronics.com
    From: Matt Dralle <dralle@matronics.com>
    Subject: "Advertising" on the Lists...
    --> Europa-List message posted by: Matt Dralle <dralle@matronics.com> >I received a nastygram from an individual who read my posting regarding >aluminum vents sale, so before the Oshkosh crowds return to the list and >this becomes a real problem, I'll offer my apologies in advance to the >group. > >Fabian Listers, I encourage small business owners such as Fabian to promote their products on the Lists. I do ask, however, that the flavor of the messages not be in the traditional form of spam messages, but more in the context of a personal message. Obviously, moderation is in order as well. The Lists are a forum for all types of dialog that involve the particular List in question. If all of the Listers on a given List were in one big room meeting and communicating in the manner that we do on the Lists, then people such as Fabian and myself, for that matter, would obviously be promoting our products to anyone that would listen. In fact, we would likely be invited to give a presentation on it to the group. The List isn't about commercialism, but it is about sharing knowledge. This extends to everyone, including those that provide products to the community. Best regards, Matt Dralle Matronics Email List Admin. Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:57:40 PM PST US
    From: "Jeremy Davey" <EuropaFlyer_3@msn.com>
    Subject: A bit of light relief
    --> Europa-List message posted by: "Jeremy Davey" <EuropaFlyer_3@msn.com> "As usual, no comment could be obtained from Keith Wilson..." "After taking Sally for a ride, Keith Wilson was nowhere to be found" Jeremy Davey Europa Monowheel 537M G-EZZA Tail done Standard XS wings with mods underway CM installed in fuse (with airbrakes fittings) 1200 build hours to date Intended fit: Rotax 914 turbo, Airmaster CS fully-feathering prop Lots of lights, buttons, switches, gizmos, and alarms -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Simon Smith Subject: Europa-List: A bit of light relief --> Europa-List message posted by: "Simon Smith" <jodel@nildram.co.uk> Hi all, To put us all in a good mood again, I propose a caption competition. The photo is at http://www.todayspilot.co.uk/tp_rally/large/IMG_9827.jpg There is no prize but I thought it might raise a smile! Simon 504 G-BZTN


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:43:54 PM PST US
    From: Matt Dralle <dralle@matronics.com>
    Subject: Official Usage Guideline [Please Read] [Monthly Posting]
    DNA: do not archive --> Europa-List message posted by: Matt Dralle <dralle@matronics.com> Dear Lister, Please read over the Europa-List Usage Guidelines below. The complete Europa-List FAQ including these Usage Guidelines can be found at the following URL: http://www.matronics.com/FAQs/Europa-List.FAQ.html Thank you, Matt Dralle Matronics Email List Administrator ****************************************************************************** Europa-List Usage Guidelines ****************************************************************************** The following details the official Usage Guidelines for the Europa-List. You are encouraged to read it carefully, and to abide by the rules therein. Failure to use the Europa-List in the manner described below may result in the removal of the subscribers from the List. Europa-List Policy Statement The purpose of the Europa-List is to provide a forum of discussion for things related to this particular discussion group. The List's goals are to serve as an information resource to its members; to deliver high-quality content; to provide moral support; to foster camaraderie among its members; and to support safe operation. Reaching these goals requires the participation and cooperation of each and every member of the List. To this end, the following guidelines have been established: - Please keep all posts related to the List at some level. Do not submit posts concerning computer viruses, urban legends, random humor, long lost buddies' phone numbers, etc. etc. - THINK carefully before you write. Ask yourself if your post will be relevant to everyone. If you have to wonder about that, DON'T send it. - Remember that your post will be included for posterity in an archive that is growing in size at an extraordinary rate. Try to be concise and terse in your posts. Avoid overly wordy and lengthy posts and responses. - Keep your signature brief. Please include your name, email address, aircraft type/tail number, and geographic location. A short line about where you are in the building process is also nice. Avoid bulky signatures with character graphics; they consume unnecessary space in the archive. - DON'T post requests to the List for information when that info is easily obtainable from other widely available sources. Consult the web page or FAQ first. - If you want to respond to a post, DO keep the "Subject:" line of your response the same as that of the original post. This makes it easy to find threads in the archive. - When responding, NEVER quote the *entire* original post in your response. DO use lines from the original post to help "tune in" the reader to the topic at hand, but be selective. The impact that quoting the entire original post has on the size of the archive can not be overstated! - When the poster asks you to respond to him/her personally, DO NOT then go ahead and reply to the List. Be aware that clicking the "reply" button on your mail package does not necessarily send your response to the original poster. You might have to actively address your response with the original poster's email address. - DO NOT use the List to respond to a post unless you have something to add that is relevant and has a broad appeal. "Way to go!", "I agree", and "Congratulations" are all responses that are better sent to the original poster directly, rather than to the List at large. - When responding to others' posts, avoid the feeling that you need to comment on every last point in their posts, unless you can truly contribute something valuable. - Feel free to disagree with other viewpoints, BUT keep your tone polite and respectful. Don't make snide comments, personally attack other listers, or take the moral high ground on an obviously controversial issue. This will only cause a pointless debate that will hurt feelings, waste bandwidth and resolve nothing. ------- [This is an automated posting.]




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --