Today's Message Index:
----------------------
1. 01:07 AM - Re: Radio Question (R.C.Harrison)
2. 06:10 AM - Re: Re: 2 Different Sizes of Rudder Cable Pulleys????? (EuropaXSA276@aol.com)
3. 06:15 AM - Re: 2 Different Sizes of Rudder Cable Pulleys????? (EuropaXSA276@aol.com)
4. 06:42 PM - Re: Radio Question (MJKTuck@cs.com)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
--> Europa-List message posted by: "R.C.Harrison" <ptag.dev@tiscali.co.uk>
Hi! Paul and Mike.
Oops....!
Meant the XCOM760 Transceiver but reading the thread perhaps shouldn't
be mentioning it! Actually it isn't mine but on loan to compare
performance.
Sorry about the flippant confusion caused. It is approved for
certification by the FCCE the communications branch of the FAA.
Regards
Bob Harrison.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Paul
Stewart
Subject: Re: Europa-List: Radio Question
--> Europa-List message posted by: Paul Stewart
<europa@pstewart.f2s.com>
Bob
Do you mean the Microair M760 or the XCOM 760? My understanding is that
the latter has been available for under a year and that it is not
approved by the CAA for installation in UK aircraft (sad 'cos we liked
the look of it).
On the same topic - has anyone any experience of the Microair M760
transiever with the XCOM intercom?
Regards
Paul Strewart #432
Sanding, sanding , sanding, sand..............
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: RE: 2 Different Sizes of Rudder Cable Pulleys????? |
--> Europa-List message posted by: EuropaXSA276@aol.com
Thanks Steve. But I have 2 sets! One small set and one large set. It
appears that other have only received one size. I'm just wondering which size
to
install. For now I used the larger size. Less clearance to the floor for the
safety retainer.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: 2 Different Sizes of Rudder Cable Pulleys????? |
--> Europa-List message posted by: EuropaXSA276@aol.com
Thanks Rowland,
I'll check the measurements.
It appears that others have only received one set of pulleys. One wonders
why I was lucky enough to get 2 sets of different sizes! < I hope my luck holds
out when I order my engine!>
I'm just curious as to which was the proper size to install. For now I used
the larger size. Less clearance to the floor for the safety retainer.
But It looks like I'll need to move the sight tube exit on the console
forward a few inches for good cable clearance.
Brian Skelly
Texas
Europa # A276 TriGear
See My build photos at:
http://www.europaowners.org/BrianS
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Radio Question |
--> Europa-List message posted by: MJKTuck@cs.com
Hi Bob,
I read with interest your problems with the Icom unit. I think you've
mentioned this to me before and I had to weigh up the pros and cons of the opinions
of those who think very highly of it and those that have had problems. You
appear to have experienced some very frustrating problems - but many highly
recommended it.
I too originally had problems with my old Terra comm unit - poor transmission
and the like and installed a Bob Archer antenna. I installed it and had it
checked with a WSWR meter and it was way off. He asked me to send it back as he
found he had a bad batch. I used the next one he sent me but still found 'dead
spots' usually masked by the engine block (i.e., when I was flying towards my
destination and trying to make radio contact!). I finally switched it out for
a small external whip antenna on the underside with copper strips radiating
around as the ground plane.
Never had a problem since.
Today I flew the Icom and - apart from no sidetone - found it to work just
great. I could hear ATIS from around 40 miles away and I could be heard 'loud
and clear' at Jabara about 30 miles away. I even picked up a Beech 1900 going
into Hays which is over 100 miles away. An RV operator in Australia contacted me
to tell me he had a similar lack of sidetone and simply switched the speaker
output and headphone output as he claimed the wiring diagram was wrong. I
didn't have time to try that so I will live with no sidetone for the time being.
Regards,
Martin
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|