---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 06/09/05: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:04 AM - DOTH - Saturday (APethers@aol.com) 2. 02:58 AM - Re: DOTH - Saturday (Paddy Clarke) 3. 05:36 AM - Fw: Tri-gear bungee (Kevin Pilcher) 4. 05:36 AM - Re: Re: Nosewheel bungee (willie harrison) 5. 05:52 AM - Re: Re: Europa-List Digest: 15 Msgs - 06/07/05 (willie harrison) 6. 05:52 AM - Re: Balancing carbs (Rob Huntington) 7. 07:00 AM - Re: lower port water pump hose to exhuast clearance (steve v.) 8. 11:05 AM - Re: Balancing carbs (N55XS) 9. 01:09 PM - Re: Re: Europa-List Digest: 15 Msgs - 06/07/05 (Tim Weert) ________________________________ Message 1 _____________________________________ Time: 12:04:20 AM PST US From: APethers@aol.com Subject: Europa-List: DOTH - Saturday HTML_TAG_EXIST_TBODY@roxy.matronics.com, BODY:, HTML@roxy.matronics.com, has@roxy.matronics.com, "tbody"@roxy.matronics.com, tag@roxy.matronics.com --> Europa-List message posted by: APethers@aol.com Although this does not meet the normal criteria for a DOTH, North Coates Flying Club is having a weekend fly in this weekend 11/12 June. Landings are free but they normally ask for a donation as it is a totally non profit making members club. I would suggest that Saturday would be the best day as the weather looks good for then. North Coates is also the base for Europa G-OGAN so would be good to see some more visitors. More details on _http://www.northcoatesflyingclub.co.uk/_ (http://www.northcoatesflyingclub.co.uk/) NORTH COATES N5330.25 E00004.00 6 nm SE Grimsby Hopefully see you there Regards Alan Part owner and builder of G-OGAN ________________________________ Message 2 _____________________________________ Time: 02:58:55 AM PST US From: Paddy Clarke Subject: Re: Europa-List: DOTH - Saturday --> Europa-List message posted by: Paddy Clarke Hi All, Should the weather not be kind, an alternative ( to which I am already committed ) is the Devon Strut fly-in to Farway Common. Not so much to do nearby as there would have been at Bolt Head, but a very warm welcome and good refreshments. On 9 Jun 2005, at 8:03, APethers@aol.com wrote: > --> Europa-List message posted by: APethers@aol.com > > Although this does not meet the normal criteria for a DOTH, North > Coates > Flying Club is having a weekend fly in this weekend 11/12 June. Paddy Clarke Europa XS - 404 G-KIMM Do Not Archive ________________________________ Message 3 _____________________________________ Time: 05:36:57 AM PST US From: "Kevin Pilcher" Subject: Europa-List: Fw: Tri-gear bungee --> Europa-List message posted by: "Kevin Pilcher" ----- Original Message ----- From: Kevin Pilcher Subject: Re: Tri-gear bungee Hi William, 1 The lenght of the bungee should be 26 ins & 28 ins. I thought I put a note to say that at the start of my E back to you, if not sorry mate. there was a typo error in the original 2 engineering supplies will get them for you. 3 Yes the 1.5 dia tube Regards Kevin ----- Original Message ----- From: William Harrison To: 'K.Pilcher' Sent: Thursday, June 09, 2005 10:48 AM Subject: RE: Tri-gear bungee Kevin That is really brilliant, thank you. A couple of quick questions: Where can I get suitable rope clamps from? Am I right in understanding that the top tube you are using is the approx 2 inch diameter tube shown in the manual, not the smaller tube right up next to the top of the firewall? From a quick back of the envelope calculation your 16 and 18 inch lengths get stretched by much more than the book figure of 175%. Am I right? How close do the loops get to their elastic limit? It sounds as though the force need to pull the loop down and hook it over the bar is a reasonable one man/no hernia operation. Is that right? Anyway, thanks once again for your help. Best wishes Willie -----Original Message----- From: K.Pilcher [mailto:kpeng@waverider.co.uk] Sent: 08 January 2004 21:00 To: europa-list@matronics.com Subject: Tri-gear bungee Hi All, Having run this past the Europa club tri gear mod rep Ian Rickard, it is his opinion that this is what's called an "Un mod" so does not need PFA mod approval. The bungee fitting and re-tightening on the tri-gear (I have a tri classic G-okev ) could possibly be described as a "hernia inducing procedure" So in an effort to make the job simpler without having to remove cowls, exhaust, heat shield, and do away with bungee knots this is what I have done. Cut 4 off lengths of bungee (Europa supplied) 16 inches long and 1off 18 inches. Form each of them into a ring with 2 inches of overlap then fit an 8mm diameter wire rope clamp leaving 1 inch sticking out either side of the U- bolt and be sure to tighten enough to stop slippage. Cut the excess thread off with a hacksaw then gently dome the ends to ensure the nuts never comes off and remove any burrs. To determine the lengths of bungee required I used a test jig made up of my original nose gear, a nose gear mounting frame and a fabricated base plate and sides to hold them all together in position. I then inverted it and loaded 350lb on top where the shimmy damper sits Now to the fitting. At this point you need a 1/2 inch internal diameter hook on one end and a tee handle on the other end of a 1/4 inch dia bar about 10 inches long. I used 1/4 dia threaded bar then after creating the hook filed it smooth. To gain more access and remove any load from the nose gear frame secure the tail of the Europa to the ground and support the front of the plane making it impossible to fall on you. On page 32-11 of the manual regarding safety cable and bungee there is a diagram so I will use it to explain On the port side of the Europa hook 1 of the 16 inch bungee bands over one side of the rear end of the nose gear inside the little end stop plate. With the rope clamp about 1.1/2 inches above the end stop plate to stop it getting in the way, feed both sides of the band up and over the large diameter tube at the back of the nose gear mounting frame creating a loop on top between the smaller diameter tubes welded to it. Feed your brand new hook tool through the loop then pull it down and over the rear end of nose gear inside the little end stop plate placing it next to the first loop. Do the same on the starboard then repeat the process. Finally fit the 18 inch bungee band in a similar way but starting it on the port side and end it on the starboard. No more nodding like an apologetic Chinaman. Regards Kevin. ________________________________ Message 4 _____________________________________ Time: 05:36:57 AM PST US From: "willie harrison" Subject: RE: Europa-List: Re: Nosewheel bungee --> Europa-List message posted by: "willie harrison" Thanks, Gary. We get regulated quite tightly by our beloved (!) PFA in the UK and they can invalidate our Permit to Fly if we do a modification without their approval, although I do take your point. A heavy nosewheel landing is something you'd only really expect from a trainee pilot and no-one would train on a Europa. Several people have suggested cunning schemes to fit bungees and the one which appeals to me is to fit 7 individual bands, each looped, tensioned and hooked separately. Although this is also a mod, it has been deemed a "non-modification-modification". Better than getting a hernia by hauling in 6 metres of extra strength knicker elastic... Best wishes Willie -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Garry Subject: Europa-List: Re: Nosewheel bungee --> Europa-List message posted by: "Garry" Willie, The bungee cords go "soft" after about 18 months. Replacement is next to impossible. I threw away my bungee cord and simply (steel) cabled the nosegear to the engine frame. My thoughts were that there is adequate suspension and shock absorption from the nose tire itself, and there is flexibility built into the nosegear assembly too. In my opinion if my landings are so poor as to require more shock absorption than available from the tire and nosegear, then I need to take up another hobby. If I was building all over again, I'd weld the nosegear suspension shut. Garry Stout N4220S 450 hrs Trigear 914 ----- Original Message ----- > Has anyone got some top tips for how to fit a nosewheel bungee with the > firewall and engine in place? > > Cheers > > Willie Harrison (G-BZNY/Build 401) ________________________________ Message 5 _____________________________________ Time: 05:52:02 AM PST US From: "willie harrison" Subject: RE: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 --> Europa-List message posted by: "willie harrison" Many thanks, Tim, That seems to make good sense, although for the immediate future I do not have time to get the necessary approval from the PFA so I will refit the elasticated bungee. However, if you could kindly send me the details of your mod I will talk to the PFA about whether they might approve it for use in the UK. Many thanks and safe flying Willie -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Tim Weert Subject: Re: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 --> Europa-List message posted by: "Tim Weert" Hi Willie, The bungee is a protection spring for your nosegear strut. We have replaced the bungee by 2 rustfree springs with the same springconstante. They are about 200 euro for two. Here are more tri-gear Europa's flying with that unofficial "MOD". I can give you all data for the spring, but in the UK you've first to deal with PFA to get permission to install them. Regards, Tim Weert Heehugowaard #490 PH-JAI 914 AP332 ----- Original Message ----- From: "willie harrison" Subject: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 > --> Europa-List message posted by: "willie harrison" > > > Has anyone got some top tips for how to fit a nosewheel bungee with the > firewall and engine in place? > > Cheers > > Willie Harrison (G-BZNY/Build 401) > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Europa-List > Digest Server > To: Europa-List Digest List > Subject: Europa-List Digest: 15 Msgs - 06/07/05 > > * > > ================================================== > Online Versions of Today's List Digest Archive > ================================================== > > Today's complete Europa-List Digest can also be found in either of the > two Web Links listed below. The .html file includes the Digest > formatted > in HTML for viewing with a web browser and features Hyperlinked Indexes > and Message Navigation. The .txt file includes the plain ASCII version > of the Europa-List Digest and can be viewed with a generic text editor > such as Notepad or with a web browser. > > HTML Version: > > http://www.matronics.com/digest/europa-list/Digest.Europa-List.2005-06-0 > 7.html > > Text Version: > > http://www.matronics.com/digest/europa-list/Digest.Europa-List.2005-06-0 > 7.txt > > > ================================================ > EMail Version of Today's List Digest Archive > ================================================ > > > Europa-List Digest Archive > --- > Total Messages Posted Tue 06/07/05: 15 > > > Today's Message Index: > ---------------------- > > 1. 07:03 AM - Europas flying in the USA (Richard Sementilli) > 2. 08:41 AM - Re: Europas flying in the USA > "memsec@europaclub.org.uk" (Matthew Carpenter) > 3. 09:02 AM - Re: Europas flying in the USA > "memsec@europaclub.org.uk" (Cliff Shaw) > 4. 10:21 AM - Now: Cliff and Betty Shaw in England - Was FW: > Europas flying in the USA "memsec@europaclub.org.uk" > (Jeremy Davey) > 5. 10:23 AM - Re: Europas flying in the USA > "memsec@europaclub.org.uk" (Rick Audy) > 6. 10:42 AM - Re: Europas flying in the USA > "memsec@europaclub.org.uk" (Rick Audy) > 7. 12:24 PM - Re: Cliff and Betty Shaw in England - Was FW: Europas > flying in the USA "memsec@europaclub.org.uk" > (Jeremy Davey) > 8. 01:35 PM - Re: Europas flying in the USA > "memsec@europaclub.org.uk" (Rick Audy) > 9. 01:37 PM - Re: Europas flying in the USA () > 10. 02:13 PM - Re: Cliff and Betty Shaw in England - Was FW: Europas > flying in the USA "memsec@europaclub.org.uk" > (Bryan Allsop) > 11. 02:51 PM - Re: Cliff and Betty Shaw in England - Was FW: Europas > flying in the USA "memsec@europaclub.org.uk" > (Jeremy Davey) > 12. 02:57 PM - lower port water pump hose to exhuast clearance > (steve v.) > 13. 05:01 PM - Re: lower port water pump hose to exhuast clearance > (N55XS) > 14. 06:54 PM - Re: Europas flying in the USA > "memsec@europaclub.org.uk" (Rick Sementi) > 15. 11:30 PM - Re: lower port water pump hose to exhuast clearance > (nigel charles) > > > ________________________________ Message 1 > _____________________________________ > > > Time: 07:03:18 AM PST US > From: Richard Sementilli > Subject: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > --> Europa-List message posted by: Richard Sementilli > > > Does anyone know how many Europas are fyling in the USA today? > > Thanks, > Richard Sementilli > > > ________________________________ Message 2 > _____________________________________ > > > Time: 08:41:23 AM PST US > > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > From: Matthew Carpenter > > --> Europa-List message posted by: Matthew Carpenter > > > Put 1 here in Amarillo Texas on your list. > > Matt Carpenter > A138 > > > Richard Sementilli wrote: > >>--> Europa-List message posted by: Richard Sementilli > >> >>Does anyone know how many Europas are fyling in the USA today? >> >>Thanks, >>Richard Sementilli >> >> >> >> > > > ________________________________ Message 3 > _____________________________________ > > > Time: 09:02:24 AM PST US > From: "Cliff Shaw" > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > > --> Europa-List message posted by: "Cliff Shaw" > > There are two here in the Seattle aria and one being repaired, soon > making > it three. > > Cliff Shaw > 1041 Euclid ave. > Edmonds, WA 98020 > 425 776 5555 > http://www.europaowners.org/WileE > > PS I am going OFF-LINE now. Heading to England to attend Jermy and > Liza's > wedding. Betty and I will see some of you at Jeremy's place on the 22th > (I > think). See you then ! > > > ________________________________ Message 4 > _____________________________________ > > > Time: 10:21:27 AM PST US > From: "Jeremy Davey" > Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas flying > in the USA "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Jeremy Davey" > > > Guys, > > Just a quick note about the Europa community gathering at my place with > Cliff and Betty: > > Location: Steeple Aston (between Upper Heyford and Enstone for fliers, > Oxford and Banbury for drivers) > Format: Open house, food and drink provided (floorspace available for > anyone > wanting to sleep over!) > > If you'd like to join us and meet Cliff and Betty, please just let me > know > by email. I can let you have directions, etc. then. > > Hoping as many of our UK folks as possible can make it and give Cliff > and > Betty a first-class Europa welcome! :-) > > Kind regards, > Jeremy > > Jeremy Davey > Europa Monowheel 537M G-EZZA > Europa Club Vice-Chairman, Webmaster, PFA NC Representative > PFA EC Member > If you can keep your head when all about you are losing theirs, then it > is > possible you haven't grasped the severity of the situation. > Tail done > Standard XS wings with mods underway > CM installed in fuse (with airbrakes fittings) > 1400 build hours to date > Intended fit: > Rotax 914 turbo, Airmaster CS fully-feathering prop > Lots of lights, buttons, switches, gizmos, and alarms > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Cliff Shaw > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Cliff Shaw" > > There are two here in the Seattle aria and one being repaired, soon > making > it three. > > Cliff Shaw > 1041 Euclid ave. > Edmonds, WA 98020 > 425 776 5555 > http://www.europaowners.org/WileE > > PS I am going OFF-LINE now. Heading to England to attend Jermy and > Liza's > wedding. Betty and I will see some of you at Jeremy's place on the 22th > (I > think). See you then ! > > > ________________________________ Message 5 > _____________________________________ > > > Time: 10:23:35 AM PST US > From: "Rick Audy" > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > > --> Europa-List message posted by: "Rick Audy" > > According to the FAA there are 106 registered (flying, under > construction > and what not, who knows). http://162.58.35.241/acdatabase/acmain.htm > will > allow you to search the FAA database. > Hope this helps, Rick > > > ________________________________ Message 6 > _____________________________________ > > > Time: 10:42:53 AM PST US > From: "Rick Audy" > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > > --> Europa-List message posted by: "Rick Audy" > > The FAA does, and they are willing to share the info at: > http://162.58.35.241/acdatabase/acmain.htm . > The answer appears to be 106 but that may include some that are not > flying > (yet or any more for that matter). > Hope this helps, Rick > > > ----- Original Message ----- > From: "Richard Sementilli" > Subject: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > > >> --> Europa-List message posted by: Richard Sementilli > >> >> Does anyone know how many Europas are fyling in the USA today? >> >> Thanks, >> Richard Sementilli >> >> >> > > > ________________________________ Message 7 > _____________________________________ > > > Time: 12:24:37 PM PST US > From: "Jeremy Davey" > Subject: RE: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas flying > in the USA "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Jeremy Davey" > > > OK, now can someone tell me what I did right? No conversions of > punctuation > marks into irritating =9887655778 sequences! But how? > > Regards, > Jeremy > > Jeremy Davey > Europa Monowheel 537M G-EZZA > Europa Club Vice-Chairman, Webmaster, PFA NC Representative > PFA EC Member > If you can keep your head when all about you are losing theirs, then it > is > possible you haven't grasped the severity of the situation. > Tail done > Standard XS wings with mods underway > CM installed in fuse (with airbrakes fittings) > 1400 build hours to date > Intended fit: > Rotax 914 turbo, Airmaster CS fully-feathering prop > Lots of lights, buttons, switches, gizmos, and alarms > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Jeremy > Davey > Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas > flying in the USA "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Jeremy Davey" > > > Guys, > > Just a quick note about the Europa community gathering at my place with > Cliff and Betty: > > Location: Steeple Aston (between Upper Heyford and Enstone for fliers, > Oxford and Banbury for drivers) > Format: Open house, food and drink provided (floorspace available for > anyone > wanting to sleep over!) > > If you'd like to join us and meet Cliff and Betty, please just let me > know > by email. I can let you have directions, etc. then. > > Hoping as many of our UK folks as possible can make it and give Cliff > and > Betty a first-class Europa welcome! :-) > > Kind regards, > Jeremy > > Jeremy Davey > Europa Monowheel 537M G-EZZA > Europa Club Vice-Chairman, Webmaster, PFA NC Representative > PFA EC Member > If you can keep your head when all about you are losing theirs, then it > is > possible you haven't grasped the severity of the situation. > Tail done > Standard XS wings with mods underway > CM installed in fuse (with airbrakes fittings) > 1400 build hours to date > Intended fit: > Rotax 914 turbo, Airmaster CS fully-feathering prop > Lots of lights, buttons, switches, gizmos, and alarms > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Cliff Shaw > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Cliff Shaw" > > There are two here in the Seattle aria and one being repaired, soon > making > it three. > > Cliff Shaw > 1041 Euclid ave. > Edmonds, WA 98020 > 425 776 5555 > http://www.europaowners.org/WileE > > PS I am going OFF-LINE now. Heading to England to attend Jermy and > Liza's > wedding. Betty and I will see some of you at Jeremy's place on the 22th > (I > think). See you then ! > > > ________________________________ Message 8 > _____________________________________ > > > Time: 01:35:37 PM PST US > From: "Rick Audy" > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > > --> Europa-List message posted by: "Rick Audy" > > Sorry first message did not show as sent. > Rick > Do not archive > > > ________________________________ Message 9 > _____________________________________ > > > Time: 01:37:10 PM PST US > From: > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > --> Europa-List message posted by: Rowland Carson > "memsec@europaclub.org.uk" > > > At 2005-06-07 10:01 -0400 Richard Sementilli wrote: > >>Does anyone know how many Europas are fyling in the USA today? > > Richard - you can get some information about this from the Europa > Club website where I maintain the lists of Europas worldwide that > have flown or been registered. Here's a brief extract. > > US-based aircraft believed to be currently flying (total 52): > > N1004T > N100MF > N111EU > N121XS > N135TD > N137AB > N138WJ > N152MT > N15JN > N165BB > N166BB > N176DH > N202Y > N203EC > N218RS > N224XS > N229WC > N24070 > N246CR > N262WF > N27EU > N284A > N28ET > N378PJ > N398JB > N4041F > N417J > N4220S > N447CB > N59GS > N6066K > N6125A > N63EU > N645XS > N6LB > N713PT > N741JH > N7552Z > N77EU > N7854M > N817DA > N82716 > N841E > N8XS > N912EA > N914BL > N914EA > N914KM > N914PB > N914XS > N96EG > N9XS > > US-based aircraft registered, but believed not at present flying, > with status (total 67): > > N100RH Being built > N108EA Being built > N11112 Being built > N11KD Being built > N120EU Being built > N123EU Being built > N128HW Being built > N128LJ Being built > N137EA Being built > N141EW Being built > N146PK Being built > N149RS Being built > N194RM Being built > N199E Being built > N1BJ Being built > N200ME Being built > N200XS Being built > N20XS Being built > N210XS Being built > N211KA Being built > N214KS Being built > N216JE Written off > N216PR Being built > N238MG Being built > N245E Being built > N255ES Being built > N262AE Being built > N291AE Being built > N295LC Being built > N396ST Being built > N3EU Being built > N40SH Being built > N4211W Being built > N44EU Being re-built > N4880W Being built > N49FL Being built > N4EU Being built > N512SA Being re-built > N526BE Being built > N55XS Being built > N6173K Written off > N625AZ Being built > N666PA Being built > N69XS Being built > N6JG Being built > N712EA Being built > N714S Being built > N800DX Being built > N8027U Written off > N8028N Being built > N808MJ Being built > N814AT Being built > N819A Being re-built > N826GG Being built > N82GT Being built > N8690E Being built > N90EU Being built > N911XS Being built > N912EE Written off > N914AB Being built > N914RB Being built > N914VA Being built > N914XL Being built > N918DJ Being built > N952JL Being built > N96V Being built > N9DT Being built > > Hope this helps. > > [I must learn to stop doing this after I retire as Membership > Secretary and concentrate on my own build!] > > regards > > Rowland > -- > > > ________________________________ Message 10 > ____________________________________ > > > Time: 02:13:17 PM PST US > From: "Bryan Allsop" > Subject: Re: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas flying > in the USA "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Bryan Allsop" > > > Hi! Jeremy. > > Sadly a number of us will be circumnavigating France on the one day we > might > have got free food and drink out of you. If you can keep it going for a > week > we will join you on the following Wednesday. > Otherwise please give our best wishes to Cliff and Betty, and apologise > for > our absence. > > Cheers, Bryan. > > ----- Original Message ----- > From: "Jeremy Davey" > Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas > flying in the USA "memsec@europaclub.org.uk" > > >> --> Europa-List message posted by: "Jeremy Davey" > >> >> Guys, >> >> Just a quick note about the Europa community gathering at my place > with >> Cliff and Betty: >> >> Location: Steeple Aston (between Upper Heyford and Enstone for fliers, >> Oxford and Banbury for drivers) >> Date: Late afternoon onwards of Wednesday 22nd June >> Format: Open house, food and drink provided (floorspace available for >> anyone >> wanting to sleep over!) >> >> If you'd like to join us and meet Cliff and Betty, please just let me > know > Do not archive. > > > ________________________________ Message 11 > ____________________________________ > > > Time: 02:51:21 PM PST US > From: "Jeremy Davey" > Subject: RE: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas flying > in the USA "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Jeremy Davey" > > > Bryan, > > Thanks for your email, and that is indeed a shame. I'm sure we can find > another occasion to offer free food and drink! > > I'm afraid that Liza and I will be sunning ourselves on our honeymoon at > that point, but we will pass on your kind wishes. You have a fun trip, > too! > > Cheers, > Jeremy > > PS And yes, sadly, this all means I'll be missing Flying for Fun 2005 > :-(. > Sorry, guys, have a great rally without me! > > Jeremy Davey > Europa Monowheel 537M G-EZZA > Europa Club Vice-Chairman, Webmaster, PFA NC Representative > PFA EC Member > If you can keep your head when all about you are losing theirs, then it > is > possible you haven't grasped the severity of the situation. > Tail done > Standard XS wings with mods underway > CM installed in fuse (with airbrakes fittings) > 1400 build hours to date > Intended fit: > Rotax 914 turbo, Airmaster CS fully-feathering prop > Lots of lights, buttons, switches, gizmos, and alarms > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Bryan > Allsop > Subject: Re: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas > flying in the USA "memsec@europaclub.org.uk" > > --> Europa-List message posted by: "Bryan Allsop" > > > Hi! Jeremy. > > Sadly a number of us will be circumnavigating France on the one day we > might > > have got free food and drink out of you. If you can keep it going for a > week > > we will join you on the following Wednesday. > Otherwise please give our best wishes to Cliff and Betty, and apologise > for > our absence. > > Cheers, Bryan. > > ----- Original Message ----- > From: "Jeremy Davey" > Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: > Europas > > flying in the USA "memsec@europaclub.org.uk" > > >> --> Europa-List message posted by: "Jeremy Davey" > >> >> Guys, >> >> Just a quick note about the Europa community gathering at my place > with >> Cliff and Betty: >> >> Location: Steeple Aston (between Upper Heyford and Enstone for fliers, >> Oxford and Banbury for drivers) >> Date: Late afternoon onwards of Wednesday 22nd June >> Format: Open house, food and drink provided (floorspace available for >> anyone >> wanting to sleep over!) >> >> If you'd like to join us and meet Cliff and Betty, please just let me > know > Do not archive. > > > ________________________________ Message 12 > ____________________________________ > > > Time: 02:57:14 PM PST US > Subject: Europa-List: lower port water pump hose to exhuast clearance > From: "steve v." > 1.64 REPLY_TO_EMPTY Reply-To: is empty > 0.10 TO_EMPTY To: is empty > > --> Europa-List message posted by: "steve v." > > hi, can any builders tell me what an acceptable clearance is between the > lower > port water pump hose and the top of the exhuast silencer assy. would be > - i have > about 3/16" ( 4mm) , or should i sleeve the pipe with fire resistant > material > ? > > thanks, steve vestuti #573 > ---------------- > Visit EuropaOwnersForum http://www.europaowners.org/ > > > ________________________________ Message 13 > ____________________________________ > > > Time: 05:01:58 PM PST US > From: N55XS > Subject: Re: Europa-List: lower port water pump hose to exhuast > clearance > > --> Europa-List message posted by: N55XS > > I had the same situation a few weeks ago, when mounting my 912S. I > ended up using the 80 degree elbow and aligning it horozonal. This gave > > me the best clearence. I then sleaved the hose with heat resistant > material from Summitt Racing. Nice installation and I have confidence > that the hose is protected... > > Jeff - N55XS > Prop is in the mail... > > > steve v. wrote: > >>--> Europa-List message posted by: "steve v." >> >>hi, can any builders tell me what an acceptable clearance is between > the lower > port water pump hose and the top of the exhuast silencer assy. would be > - i have > about 3/16" ( 4mm) , or should i sleeve the pipe with fire resistant > material > ? >> >> thanks, steve vestuti #573 >>---------------- >>Visit EuropaOwnersForum http://www.europaowners.org/ >> >> >> >> > > > ________________________________ Message 14 > ____________________________________ > > > Time: 06:54:33 PM PST US > From: "Rick Sementi" > > Subject: Re: Europa-List: Europas flying in the USA > "memsec@europaclub.org.uk" > > > --> Europa-List message posted by: "Rick Sementi" > > thank you so much!!! > >>From: >>Reply-To: europa-list@matronics.com >>To: europa-list@matronics.com >>Subject: Re: Europa-List: Europas flying in the USA >>"memsec@europaclub.org.uk" >>Date: Tue, 7 Jun 2005 20:29:07 +0100 >> >>--> Europa-List message posted by: Rowland Carson >>"memsec@europaclub.org.uk" >> >>At 2005-06-07 10:01 -0400 Richard Sementilli wrote: >> >> >Does anyone know how many Europas are fyling in the USA today? >> >>Richard - you can get some information about this from the Europa >>Club website where I maintain the lists of Europas worldwide that >>have flown or been registered. Here's a brief extract. >> >>US-based aircraft believed to be currently flying (total 52): >> >>N1004T >>N100MF >>N111EU >>N121XS >>N135TD >>N137AB >>N138WJ >>N152MT >>N15JN >>N165BB >>N166BB >>N176DH >>N202Y >>N203EC >>N218RS >>N224XS >>N229WC >>N24070 >>N246CR >>N262WF >>N27EU >>N284A >>N28ET >>N378PJ >>N398JB >>N4041F >>N417J >>N4220S >>N447CB >>N59GS >>N6066K >>N6125A >>N63EU >>N645XS >>N6LB >>N713PT >>N741JH >>N7552Z >>N77EU >>N7854M >>N817DA >>N82716 >>N841E >>N8XS >>N912EA >>N914BL >>N914EA >>N914KM >>N914PB >>N914XS >>N96EG >>N9XS >> >>US-based aircraft registered, but believed not at present flying, >>with status (total 67): >> >>N100RH Being built >>N108EA Being built >>N11112 Being built >>N11KD Being built >>N120EU Being built >>N123EU Being built >>N128HW Being built >>N128LJ Being built >>N137EA Being built >>N141EW Being built >>N146PK Being built >>N149RS Being built >>N194RM Being built >>N199E Being built >>N1BJ Being built >>N200ME Being built >>N200XS Being built >>N20XS Being built >>N210XS Being built >>N211KA Being built >>N214KS Being built >>N216JE Written off >>N216PR Being built >>N238MG Being built >>N245E Being built >>N255ES Being built >>N262AE Being built >>N291AE Being built >>N295LC Being built >>N396ST Being built >>N3EU Being built >>N40SH Being built >>N4211W Being built >>N44EU Being re-built >>N4880W Being built >>N49FL Being built >>N4EU Being built >>N512SA Being re-built >>N526BE Being built >>N55XS Being built >>N6173K Written off >>N625AZ Being built >>N666PA Being built >>N69XS Being built >>N6JG Being built >>N712EA Being built >>N714S Being built >>N800DX Being built >>N8027U Written off >>N8028N Being built >>N808MJ Being built >>N814AT Being built >>N819A Being re-built >>N826GG Being built >>N82GT Being built >>N8690E Being built >>N90EU Being built >>N911XS Being built >>N912EE Written off >>N914AB Being built >>N914RB Being built >>N914VA Being built >>N914XL Being built >>N918DJ Being built >>N952JL Being built >>N96V Being built >>N9DT Being built >> >>Hope this helps. >> >>[I must learn to stop doing this after I retire as Membership >>Secretary and concentrate on my own build!] >> >>regards >> >>Rowland >>-- >>| Rowland Carson Europa Club Membership Secretary - email for info! >>| Europa 435 G-ROWI (750 hours building) PFA #16532 >>| e-mail website >> >> > > > ________________________________ Message 15 > ____________________________________ > > > Time: 11:30:20 PM PST US > From: "nigel charles" > Subject: RE: Europa-List: lower port water pump hose to exhuast > clearance > > --> Europa-List message posted by: "nigel charles" > > > This clearance can vary depending on how far aft the cooling duct > assembly is mounted to start with. I noticed this before I fixed the > duct in position so positioned it a little further aft. I have produced > a 'Firewall Forward Tips' article for the next Europa Flyer. I will get > this included > > Nigel Charles > >>>-----Original Message----- >>>From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list- >>>server@matronics.com] On Behalf Of steve v. >>>Sent: Tuesday, June 07, 2005 22:57 >>>Subject: Europa-List: lower port water pump hose to exhuast clearance >>> >>>--> Europa-List message posted by: "steve v." >>> >>>hi, can any builders tell me what an acceptable clearance is between > the >>>lower port water pump hose and the top of the exhuast silencer assy. > would >>>be - i have about 3/16" ( 4mm) , or should i sleeve the pipe with fire >>>resistant material ? >>> >>> thanks, steve vestuti #573 >>>---------------- >>>Visit EuropaOwnersForum http://www.europaowners.org/ >>> >>> >>> >>> > > > ________________________________ Message 6 _____________________________________ Time: 05:52:02 AM PST US From: Rob Huntington Subject: Re: Europa-List: Balancing carbs --> Europa-List message posted by: Rob Huntington Yes Jeff, That's exactly where you hook them. Good luck. Rob Huntington Phoenix Composites --- N55XS wrote: > --> Europa-List message posted by: N55XS > > > When hooking up the vacuum gauges to balance the > carbs, do I disconnect > the cross tube on my 912S and hook the gauges there? > Thanks > > -- > Jeff - N55XS > Prop is in LA... > > > > browse > Subscriptions page, > FAQ, > > > > > > ________________________________ Message 7 _____________________________________ Time: 07:00:40 AM PST US Subject: Europa-List: RE: lower port water pump hose to exhuast clearance From: "steve v." 1.64 REPLY_TO_EMPTY Reply-To: is empty 0.10 TO_EMPTY To: is empty --> Europa-List message posted by: "steve v." thanks for the replies, i expect i will sleeve it with foil or some other heat reflecting material , i havent installed the ducts for the rads. as yet , steve vestuti # 573 ---------------- Visit EuropaOwnersForum http://www.europaowners.org/ ________________________________ Message 8 _____________________________________ Time: 11:05:18 AM PST US From: N55XS Subject: Re: Europa-List: Balancing carbs --> Europa-List message posted by: N55XS Rob Huntington wrote: >--> Europa-List message posted by: Rob Huntington > >Yes Jeff, >That's exactly where you hook them. Good luck. > >Rob Huntington >Phoenix Composites > >--- N55XS wrote: > > > >>--> Europa-List message posted by: N55XS >> >> >>When hooking up the vacuum gauges to balance the >>carbs, do I disconnect >>the cross tube on my 912S and hook the gauges there? >> Thanks >> >>-- >>Jeff - N55XS >>Prop is in LA... >> >> >> Thank you, Rob and Tim. I hope to be at that stage, this weekend. The Airmaster just came this morning and I am busy installing. Gonna be a great feeling to finally have a whole airplane... Jeff - N55XS Getting really close now... -- ________________________________ Message 9 _____________________________________ Time: 01:09:38 PM PST US From: "Tim Weert" Subject: Re: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 --> Europa-List message posted by: "Tim Weert" Hi Willie, I sent you on your personal email address the data and two pictures of the springs. My be we meet during the Kemble PFA for more details. I am sure this "Dutch"-MOD makes sense. Regards, Tim. ----- Original Message ----- From: "willie harrison" Subject: RE: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 > --> Europa-List message posted by: "willie harrison" > > > Many thanks, Tim, > > That seems to make good sense, although for the immediate future I do > not have time to get the necessary approval from the PFA so I will refit > the elasticated bungee. > > However, if you could kindly send me the details of your mod I will talk > to the PFA about whether they might approve it for use in the UK. > > Many thanks and safe flying > > Willie > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Tim Weert > To: europa-list@matronics.com > Subject: Re: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 > > --> Europa-List message posted by: "Tim Weert" > > Hi Willie, > > The bungee is a protection spring for your nosegear strut. We have > replaced > the bungee by 2 rustfree springs with the same springconstante. They are > > about 200 euro for two. > Here are more tri-gear Europa's flying with that unofficial "MOD". > I can give you all data for the spring, but in the UK you've first to > deal > with PFA to get permission to install them. > > Regards, Tim Weert > Heehugowaard > #490 PH-JAI 914 AP332 > > ----- Original Message ----- > From: "willie harrison" > To: > Subject: Europa-List: RE: Europa-List Digest: 15 Msgs - 06/07/05 > > >> --> Europa-List message posted by: "willie harrison" >> >> >> Has anyone got some top tips for how to fit a nosewheel bungee with > the >> firewall and engine in place? >> >> Cheers >> >> Willie Harrison (G-BZNY/Build 401) >> >> -----Original Message----- >> From: owner-europa-list-server@matronics.com >> [mailto:owner-europa-list-server@matronics.com] On Behalf Of > Europa-List >> Digest Server >> To: Europa-List Digest List >> Subject: Europa-List Digest: 15 Msgs - 06/07/05 >> >> * >> >> ================================================== >> Online Versions of Today's List Digest Archive >> ================================================== >> >> Today's complete Europa-List Digest can also be found in either of the >> two Web Links listed below. The .html file includes the Digest >> formatted >> in HTML for viewing with a web browser and features Hyperlinked > Indexes >> and Message Navigation. The .txt file includes the plain ASCII > version >> of the Europa-List Digest and can be viewed with a generic text editor >> such as Notepad or with a web browser. >> >> HTML Version: >> >> > http://www.matronics.com/digest/europa-list/Digest.Europa-List.2005-06-0 >> 7.html >> >> Text Version: >> >> > http://www.matronics.com/digest/europa-list/Digest.Europa-List.2005-06-0 >> 7.txt >> >> >> ================================================ >> EMail Version of Today's List Digest Archive >> ================================================ >> >> >> Europa-List Digest Archive >> --- >> Total Messages Posted Tue 06/07/05: 15 >> >> >> Today's Message Index: >> ---------------------- >> >> 1. 07:03 AM - Europas flying in the USA (Richard Sementilli) >> 2. 08:41 AM - Re: Europas flying in the USA >> "memsec@europaclub.org.uk" (Matthew Carpenter) >> 3. 09:02 AM - Re: Europas flying in the USA >> "memsec@europaclub.org.uk" (Cliff Shaw) >> 4. 10:21 AM - Now: Cliff and Betty Shaw in England - Was FW: >> Europas flying in the USA "memsec@europaclub.org.uk" >> (Jeremy Davey) >> 5. 10:23 AM - Re: Europas flying in the USA >> "memsec@europaclub.org.uk" (Rick Audy) >> 6. 10:42 AM - Re: Europas flying in the USA >> "memsec@europaclub.org.uk" (Rick Audy) >> 7. 12:24 PM - Re: Cliff and Betty Shaw in England - Was FW: > Europas >> flying in the USA "memsec@europaclub.org.uk" > >> (Jeremy Davey) >> 8. 01:35 PM - Re: Europas flying in the USA >> "memsec@europaclub.org.uk" (Rick Audy) >> 9. 01:37 PM - Re: Europas flying in the USA () >> 10. 02:13 PM - Re: Cliff and Betty Shaw in England - Was FW: > Europas >> flying in the USA "memsec@europaclub.org.uk" > >> (Bryan Allsop) >> 11. 02:51 PM - Re: Cliff and Betty Shaw in England - Was FW: > Europas >> flying in the USA "memsec@europaclub.org.uk" > >> (Jeremy Davey) >> 12. 02:57 PM - lower port water pump hose to exhuast clearance >> (steve v.) >> 13. 05:01 PM - Re: lower port water pump hose to exhuast clearance >> (N55XS) >> 14. 06:54 PM - Re: Europas flying in the USA >> "memsec@europaclub.org.uk" (Rick Sementi) >> 15. 11:30 PM - Re: lower port water pump hose to exhuast clearance >> (nigel charles) >> >> >> ________________________________ Message 1 >> _____________________________________ >> >> >> Time: 07:03:18 AM PST US >> From: Richard Sementilli >> Subject: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> --> Europa-List message posted by: Richard Sementilli >> >> >> Does anyone know how many Europas are fyling in the USA today? >> >> Thanks, >> Richard Sementilli >> >> >> ________________________________ Message 2 >> _____________________________________ >> >> >> Time: 08:41:23 AM PST US >> >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> From: Matthew Carpenter >> >> --> Europa-List message posted by: Matthew Carpenter >> >> >> Put 1 here in Amarillo Texas on your list. >> >> Matt Carpenter >> A138 >> >> >> Richard Sementilli wrote: >> >>>--> Europa-List message posted by: Richard Sementilli >> >>> >>>Does anyone know how many Europas are fyling in the USA today? >>> >>>Thanks, >>>Richard Sementilli >>> >>> >>> >>> >> >> >> ________________________________ Message 3 >> _____________________________________ >> >> >> Time: 09:02:24 AM PST US >> From: "Cliff Shaw" >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> >> --> Europa-List message posted by: "Cliff Shaw" > >> >> There are two here in the Seattle aria and one being repaired, soon >> making >> it three. >> >> Cliff Shaw >> 1041 Euclid ave. >> Edmonds, WA 98020 >> 425 776 5555 >> http://www.europaowners.org/WileE >> >> PS I am going OFF-LINE now. Heading to England to attend Jermy and >> Liza's >> wedding. Betty and I will see some of you at Jeremy's place on the > 22th >> (I >> think). See you then ! >> >> >> ________________________________ Message 4 >> _____________________________________ >> >> >> Time: 10:21:27 AM PST US >> From: "Jeremy Davey" >> Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas flying >> in the USA "memsec@europaclub.org.uk" > >> >> --> Europa-List message posted by: "Jeremy Davey" >> >> >> Guys, >> >> Just a quick note about the Europa community gathering at my place > with >> Cliff and Betty: >> >> Location: Steeple Aston (between Upper Heyford and Enstone for fliers, >> Oxford and Banbury for drivers) >> Format: Open house, food and drink provided (floorspace available for >> anyone >> wanting to sleep over!) >> >> If you'd like to join us and meet Cliff and Betty, please just let me >> know >> by email. I can let you have directions, etc. then. >> >> Hoping as many of our UK folks as possible can make it and give Cliff >> and >> Betty a first-class Europa welcome! :-) >> >> Kind regards, >> Jeremy >> >> Jeremy Davey >> Europa Monowheel 537M G-EZZA >> Europa Club Vice-Chairman, Webmaster, PFA NC Representative >> PFA EC Member >> If you can keep your head when all about you are losing theirs, then > it >> is >> possible you haven't grasped the severity of the situation. >> Tail done >> Standard XS wings with mods underway >> CM installed in fuse (with airbrakes fittings) >> 1400 build hours to date >> Intended fit: >> Rotax 914 turbo, Airmaster CS fully-feathering prop >> Lots of lights, buttons, switches, gizmos, and alarms >> >> >> -----Original Message----- >> From: owner-europa-list-server@matronics.com >> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Cliff > Shaw >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> --> Europa-List message posted by: "Cliff Shaw" > >> >> There are two here in the Seattle aria and one being repaired, soon >> making >> it three. >> >> Cliff Shaw >> 1041 Euclid ave. >> Edmonds, WA 98020 >> 425 776 5555 >> http://www.europaowners.org/WileE >> >> PS I am going OFF-LINE now. Heading to England to attend Jermy and >> Liza's >> wedding. Betty and I will see some of you at Jeremy's place on the > 22th >> (I >> think). See you then ! >> >> >> ________________________________ Message 5 >> _____________________________________ >> >> >> Time: 10:23:35 AM PST US >> From: "Rick Audy" >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> >> --> Europa-List message posted by: "Rick Audy" >> >> According to the FAA there are 106 registered (flying, under >> construction >> and what not, who knows). http://162.58.35.241/acdatabase/acmain.htm >> will >> allow you to search the FAA database. >> Hope this helps, Rick >> >> >> ________________________________ Message 6 >> _____________________________________ >> >> >> Time: 10:42:53 AM PST US >> From: "Rick Audy" >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> >> --> Europa-List message posted by: "Rick Audy" >> >> The FAA does, and they are willing to share the info at: >> http://162.58.35.241/acdatabase/acmain.htm . >> The answer appears to be 106 but that may include some that are not >> flying >> (yet or any more for that matter). >> Hope this helps, Rick >> >> >> ----- Original Message ----- >> From: "Richard Sementilli" >> Subject: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> >> >>> --> Europa-List message posted by: Richard Sementilli >> >>> >>> Does anyone know how many Europas are fyling in the USA today? >>> >>> Thanks, >>> Richard Sementilli >>> >>> >>> >> >> >> ________________________________ Message 7 >> _____________________________________ >> >> >> Time: 12:24:37 PM PST US >> From: "Jeremy Davey" >> Subject: RE: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas flying >> in the USA "memsec@europaclub.org.uk" > >> >> --> Europa-List message posted by: "Jeremy Davey" >> >> >> OK, now can someone tell me what I did right? No conversions of >> punctuation >> marks into irritating =9887655778 sequences! But how? >> >> Regards, >> Jeremy >> >> Jeremy Davey >> Europa Monowheel 537M G-EZZA >> Europa Club Vice-Chairman, Webmaster, PFA NC Representative >> PFA EC Member >> If you can keep your head when all about you are losing theirs, then > it >> is >> possible you haven't grasped the severity of the situation. >> Tail done >> Standard XS wings with mods underway >> CM installed in fuse (with airbrakes fittings) >> 1400 build hours to date >> Intended fit: >> Rotax 914 turbo, Airmaster CS fully-feathering prop >> Lots of lights, buttons, switches, gizmos, and alarms >> >> >> -----Original Message----- >> From: owner-europa-list-server@matronics.com >> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Jeremy >> Davey >> Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas >> flying in the USA "memsec@europaclub.org.uk" > >> >> --> Europa-List message posted by: "Jeremy Davey" >> >> >> Guys, >> >> Just a quick note about the Europa community gathering at my place > with >> Cliff and Betty: >> >> Location: Steeple Aston (between Upper Heyford and Enstone for fliers, >> Oxford and Banbury for drivers) >> Format: Open house, food and drink provided (floorspace available for >> anyone >> wanting to sleep over!) >> >> If you'd like to join us and meet Cliff and Betty, please just let me >> know >> by email. I can let you have directions, etc. then. >> >> Hoping as many of our UK folks as possible can make it and give Cliff >> and >> Betty a first-class Europa welcome! :-) >> >> Kind regards, >> Jeremy >> >> Jeremy Davey >> Europa Monowheel 537M G-EZZA >> Europa Club Vice-Chairman, Webmaster, PFA NC Representative >> PFA EC Member >> If you can keep your head when all about you are losing theirs, then > it >> is >> possible you haven't grasped the severity of the situation. >> Tail done >> Standard XS wings with mods underway >> CM installed in fuse (with airbrakes fittings) >> 1400 build hours to date >> Intended fit: >> Rotax 914 turbo, Airmaster CS fully-feathering prop >> Lots of lights, buttons, switches, gizmos, and alarms >> >> >> -----Original Message----- >> From: owner-europa-list-server@matronics.com >> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Cliff > Shaw >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> --> Europa-List message posted by: "Cliff Shaw" > >> >> There are two here in the Seattle aria and one being repaired, soon >> making >> it three. >> >> Cliff Shaw >> 1041 Euclid ave. >> Edmonds, WA 98020 >> 425 776 5555 >> http://www.europaowners.org/WileE >> >> PS I am going OFF-LINE now. Heading to England to attend Jermy and >> Liza's >> wedding. Betty and I will see some of you at Jeremy's place on the > 22th >> (I >> think). See you then ! >> >> >> ________________________________ Message 8 >> _____________________________________ >> >> >> Time: 01:35:37 PM PST US >> From: "Rick Audy" >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> >> --> Europa-List message posted by: "Rick Audy" >> >> Sorry first message did not show as sent. >> Rick >> Do not archive >> >> >> ________________________________ Message 9 >> _____________________________________ >> >> >> Time: 01:37:10 PM PST US >> From: >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> --> Europa-List message posted by: Rowland Carson >> "memsec@europaclub.org.uk" >> >> >> At 2005-06-07 10:01 -0400 Richard Sementilli wrote: >> >>>Does anyone know how many Europas are fyling in the USA today? >> >> Richard - you can get some information about this from the Europa >> Club website where I maintain the lists of Europas worldwide that >> have flown or been registered. Here's a brief extract. >> >> US-based aircraft believed to be currently flying (total 52): >> >> N1004T >> N100MF >> N111EU >> N121XS >> N135TD >> N137AB >> N138WJ >> N152MT >> N15JN >> N165BB >> N166BB >> N176DH >> N202Y >> N203EC >> N218RS >> N224XS >> N229WC >> N24070 >> N246CR >> N262WF >> N27EU >> N284A >> N28ET >> N378PJ >> N398JB >> N4041F >> N417J >> N4220S >> N447CB >> N59GS >> N6066K >> N6125A >> N63EU >> N645XS >> N6LB >> N713PT >> N741JH >> N7552Z >> N77EU >> N7854M >> N817DA >> N82716 >> N841E >> N8XS >> N912EA >> N914BL >> N914EA >> N914KM >> N914PB >> N914XS >> N96EG >> N9XS >> >> US-based aircraft registered, but believed not at present flying, >> with status (total 67): >> >> N100RH Being built >> N108EA Being built >> N11112 Being built >> N11KD Being built >> N120EU Being built >> N123EU Being built >> N128HW Being built >> N128LJ Being built >> N137EA Being built >> N141EW Being built >> N146PK Being built >> N149RS Being built >> N194RM Being built >> N199E Being built >> N1BJ Being built >> N200ME Being built >> N200XS Being built >> N20XS Being built >> N210XS Being built >> N211KA Being built >> N214KS Being built >> N216JE Written off >> N216PR Being built >> N238MG Being built >> N245E Being built >> N255ES Being built >> N262AE Being built >> N291AE Being built >> N295LC Being built >> N396ST Being built >> N3EU Being built >> N40SH Being built >> N4211W Being built >> N44EU Being re-built >> N4880W Being built >> N49FL Being built >> N4EU Being built >> N512SA Being re-built >> N526BE Being built >> N55XS Being built >> N6173K Written off >> N625AZ Being built >> N666PA Being built >> N69XS Being built >> N6JG Being built >> N712EA Being built >> N714S Being built >> N800DX Being built >> N8027U Written off >> N8028N Being built >> N808MJ Being built >> N814AT Being built >> N819A Being re-built >> N826GG Being built >> N82GT Being built >> N8690E Being built >> N90EU Being built >> N911XS Being built >> N912EE Written off >> N914AB Being built >> N914RB Being built >> N914VA Being built >> N914XL Being built >> N918DJ Being built >> N952JL Being built >> N96V Being built >> N9DT Being built >> >> Hope this helps. >> >> [I must learn to stop doing this after I retire as Membership >> Secretary and concentrate on my own build!] >> >> regards >> >> Rowland >> -- >> | Rowland Carson Europa Club Membership Secretary - email for info! >> | Europa 435 G-ROWI (750 hours building) PFA #16532 >> | e-mail website >> >> >> ________________________________ Message 10 >> ____________________________________ >> >> >> Time: 02:13:17 PM PST US >> From: "Bryan Allsop" >> Subject: Re: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas flying >> in the USA "memsec@europaclub.org.uk" > >> >> --> Europa-List message posted by: "Bryan Allsop" >> >> >> Hi! Jeremy. >> >> Sadly a number of us will be circumnavigating France on the one day we >> might >> have got free food and drink out of you. If you can keep it going for > a >> week >> we will join you on the following Wednesday. >> Otherwise please give our best wishes to Cliff and Betty, and > apologise >> for >> our absence. >> >> Cheers, Bryan. >> >> ----- Original Message ----- >> From: "Jeremy Davey" >> Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas >> flying in the USA "memsec@europaclub.org.uk" > >> >> >>> --> Europa-List message posted by: "Jeremy Davey" >> >>> >>> Guys, >>> >>> Just a quick note about the Europa community gathering at my place >> with >>> Cliff and Betty: >>> >>> Location: Steeple Aston (between Upper Heyford and Enstone for > fliers, >>> Oxford and Banbury for drivers) >>> Date: Late afternoon onwards of Wednesday 22nd June >>> Format: Open house, food and drink provided (floorspace available for >>> anyone >>> wanting to sleep over!) >>> >>> If you'd like to join us and meet Cliff and Betty, please just let me >> know >> Do not archive. >> >> >> ________________________________ Message 11 >> ____________________________________ >> >> >> Time: 02:51:21 PM PST US >> From: "Jeremy Davey" >> Subject: RE: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas flying >> in the USA "memsec@europaclub.org.uk" > >> >> --> Europa-List message posted by: "Jeremy Davey" >> >> >> Bryan, >> >> Thanks for your email, and that is indeed a shame. I'm sure we can > find >> another occasion to offer free food and drink! >> >> I'm afraid that Liza and I will be sunning ourselves on our honeymoon > at >> that point, but we will pass on your kind wishes. You have a fun trip, >> too! >> >> Cheers, >> Jeremy >> >> PS And yes, sadly, this all means I'll be missing Flying for Fun 2005 >> :-(. >> Sorry, guys, have a great rally without me! >> >> Jeremy Davey >> Europa Monowheel 537M G-EZZA >> Europa Club Vice-Chairman, Webmaster, PFA NC Representative >> PFA EC Member >> If you can keep your head when all about you are losing theirs, then > it >> is >> possible you haven't grasped the severity of the situation. >> Tail done >> Standard XS wings with mods underway >> CM installed in fuse (with airbrakes fittings) >> 1400 build hours to date >> Intended fit: >> Rotax 914 turbo, Airmaster CS fully-feathering prop >> Lots of lights, buttons, switches, gizmos, and alarms >> >> >> -----Original Message----- >> From: owner-europa-list-server@matronics.com >> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Bryan >> Allsop >> Subject: Re: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas >> flying in the USA "memsec@europaclub.org.uk" > >> >> --> Europa-List message posted by: "Bryan Allsop" >> >> >> Hi! Jeremy. >> >> Sadly a number of us will be circumnavigating France on the one day we >> might >> >> have got free food and drink out of you. If you can keep it going for > a >> week >> >> we will join you on the following Wednesday. >> Otherwise please give our best wishes to Cliff and Betty, and > apologise >> for >> our absence. >> >> Cheers, Bryan. >> >> ----- Original Message ----- >> From: "Jeremy Davey" >> Subject: Now: Cliff and Betty Shaw in England - Was FW: Europa-List: >> Europas >> >> flying in the USA "memsec@europaclub.org.uk" > >> >> >>> --> Europa-List message posted by: "Jeremy Davey" >> >>> >>> Guys, >>> >>> Just a quick note about the Europa community gathering at my place >> with >>> Cliff and Betty: >>> >>> Location: Steeple Aston (between Upper Heyford and Enstone for > fliers, >>> Oxford and Banbury for drivers) >>> Date: Late afternoon onwards of Wednesday 22nd June >>> Format: Open house, food and drink provided (floorspace available for >>> anyone >>> wanting to sleep over!) >>> >>> If you'd like to join us and meet Cliff and Betty, please just let me >> know >> Do not archive. >> >> >> ________________________________ Message 12 >> ____________________________________ >> >> >> Time: 02:57:14 PM PST US >> Subject: Europa-List: lower port water pump hose to exhuast clearance >> From: "steve v." >> 1.64 REPLY_TO_EMPTY Reply-To: is empty >> 0.10 TO_EMPTY To: is empty >> >> --> Europa-List message posted by: "steve v." >> >> hi, can any builders tell me what an acceptable clearance is between > the >> lower >> port water pump hose and the top of the exhuast silencer assy. would > be >> - i have >> about 3/16" ( 4mm) , or should i sleeve the pipe with fire resistant >> material >> ? >> >> thanks, steve vestuti #573 >> ---------------- >> Visit EuropaOwnersForum http://www.europaowners.org/ >> >> >> ________________________________ Message 13 >> ____________________________________ >> >> >> Time: 05:01:58 PM PST US >> From: N55XS >> Subject: Re: Europa-List: lower port water pump hose to exhuast >> clearance >> >> --> Europa-List message posted by: N55XS >> >> I had the same situation a few weeks ago, when mounting my 912S. I >> ended up using the 80 degree elbow and aligning it horozonal. This > gave >> >> me the best clearence. I then sleaved the hose with heat resistant >> material from Summitt Racing. Nice installation and I have confidence >> that the hose is protected... >> >> Jeff - N55XS >> Prop is in the mail... >> >> >> steve v. wrote: >> >>>--> Europa-List message posted by: "steve v." >>> >>>hi, can any builders tell me what an acceptable clearance is between >> the lower >> port water pump hose and the top of the exhuast silencer assy. would > be >> - i have >> about 3/16" ( 4mm) , or should i sleeve the pipe with fire resistant >> material >> ? >>> >>> thanks, steve vestuti #573 >>>---------------- >>>Visit EuropaOwnersForum http://www.europaowners.org/ >>> >>> >>> >>> >> >> >> ________________________________ Message 14 >> ____________________________________ >> >> >> Time: 06:54:33 PM PST US >> From: "Rick Sementi" >> >> Subject: Re: Europa-List: Europas flying in the USA >> "memsec@europaclub.org.uk" >> >> >> --> Europa-List message posted by: "Rick Sementi" > >> >> thank you so much!!! >> >>>From: >>>Reply-To: europa-list@matronics.com >>>To: europa-list@matronics.com >>>Subject: Re: Europa-List: Europas flying in the USA >>>"memsec@europaclub.org.uk" >>>Date: Tue, 7 Jun 2005 20:29:07 +0100 >>> >>>--> Europa-List message posted by: Rowland Carson >>>"memsec@europaclub.org.uk" >>> >>>At 2005-06-07 10:01 -0400 Richard Sementilli wrote: >>> >>> >Does anyone know how many Europas are fyling in the USA today? >>> >>>Richard - you can get some information about this from the Europa >>>Club website where I maintain the lists of Europas worldwide that >>>have flown or been registered. Here's a brief extract. >>> >>>US-based aircraft believed to be currently flying (total 52): >>> >>>N1004T >>>N100MF >>>N111EU >>>N121XS >>>N135TD >>>N137AB >>>N138WJ >>>N152MT >>>N15JN >>>N165BB >>>N166BB >>>N176DH >>>N202Y >>>N203EC >>>N218RS >>>N224XS >>>N229WC >>>N24070 >>>N246CR >>>N262WF >>>N27EU >>>N284A >>>N28ET >>>N378PJ >>>N398JB >>>N4041F >>>N417J >>>N4220S >>>N447CB >>>N59GS >>>N6066K >>>N6125A >>>N63EU >>>N645XS >>>N6LB >>>N713PT >>>N741JH >>>N7552Z >>>N77EU >>>N7854M >>>N817DA >>>N82716 >>>N841E >>>N8XS >>>N912EA >>>N914BL >>>N914EA >>>N914KM >>>N914PB >>>N914XS >>>N96EG >>>N9XS >>> >>>US-based aircraft registered, but believed not at present flying, >>>with status (total 67): >>> >>>N100RH Being built >>>N108EA Being built >>>N11112 Being built >>>N11KD Being built >>>N120EU Being built >>>N123EU Being built >>>N128HW Being built >>>N128LJ Being built >>>N137EA Being built >>>N141EW Being built >>>N146PK Being built >>>N149RS Being built >>>N194RM Being built >>>N199E Being built >>>N1BJ Being built >>>N200ME Being built >>>N200XS Being built >>>N20XS Being built >>>N210XS Being built >>>N211KA Being built >>>N214KS Being built >>>N216JE Written off >>>N216PR Being built >>>N238MG Being built >>>N245E Being built >>>N255ES Being built >>>N262AE Being built >>>N291AE Being built >>>N295LC Being built >>>N396ST Being built >>>N3EU Being built >>>N40SH Being built >>>N4211W Being built >>>N44EU Being re-built >>>N4880W Being built >>>N49FL Being built >>>N4EU Being built >>>N512SA Being re-built >>>N526BE Being built >>>N55XS Being built >>>N6173K Written off >>>N625AZ Being built >>>N666PA Being built >>>N69XS Being built >>>N6JG Being built >>>N712EA Being built >>>N714S Being built >>>N800DX Being built >>>N8027U Written off >>>N8028N Being built >>>N808MJ Being built >>>N814AT Being built >>>N819A Being re-built >>>N826GG Being built >>>N82GT Being built >>>N8690E Being built >>>N90EU Being built >>>N911XS Being built >>>N912EE Written off >>>N914AB Being built >>>N914RB Being built >>>N914VA Being built >>>N914XL Being built >>>N918DJ Being built >>>N952JL Being built >>>N96V Being built >>>N9DT Being built >>> >>>Hope this helps. >>> >>>[I must learn to stop doing this after I retire as Membership >>>Secretary and concentrate on my own build!] >>> >>>regards >>> >>>Rowland >>>-- >>>| Rowland Carson Europa Club Membership Secretary - email for info! >>>| Europa 435 G-ROWI (750 hours building) PFA #16532 >>>| e-mail website >>> >>> >> >> >> ________________________________ Message 15 >> ____________________________________ >> >> >> Time: 11:30:20 PM PST US >> From: "nigel charles" >> Subject: RE: Europa-List: lower port water pump hose to exhuast >> clearance >> >> --> Europa-List message posted by: "nigel charles" >> >> >> This clearance can vary depending on how far aft the cooling duct >> assembly is mounted to start with. I noticed this before I fixed the >> duct in position so positioned it a little further aft. I have > produced >> a 'Firewall Forward Tips' article for the next Europa Flyer. I will > get >> this included >> >> Nigel Charles >> >>>>-----Original Message----- >>>>From: owner-europa-list-server@matronics.com >> [mailto:owner-europa-list- >>>>server@matronics.com] On Behalf Of steve v. >>>>Sent: Tuesday, June 07, 2005 22:57 >>>>Subject: Europa-List: lower port water pump hose to exhuast clearance >>>> >>>>--> Europa-List message posted by: "steve v." >>>> >>>>hi, can any builders tell me what an acceptable clearance is between >> the >>>>lower port water pump hose and the top of the exhuast silencer assy. >> would >>>>be - i have about 3/16" ( 4mm) , or should i sleeve the pipe with > fire >>>>resistant material ? >>>> >>>> thanks, steve vestuti #573 >>>>---------------- >>>>Visit EuropaOwnersForum http://www.europaowners.org/ >>>> >>>> >>>> >>>> >> >> >> > > >