----------------------------------------------------------
                           Europa-List Digest Archive
                                      ---
                     Total Messages Posted Fri 06/24/05: 5
           ----------------------------------------------------------
 
 
Today's Message Index:
----------------------
 
     1. 12:32 AM - Re: New Future Europa Pilot  (Kingsley Hurst)
     2. 09:39 AM - painting  (Paul Stewart)
     3. 12:26 PM - Torque tube ball bearings?  (Ronald J. Parigoris)
     4. 02:16 PM - Re: Re: TAS Calculations  (Rowland Carson)
     5. 02:16 PM - Re: Re: TAS Calculations  (Rowland Carson)
 
 
 
________________________________  Message 1  _____________________________________


Time: 12:32:29 AM PST US
From: "Kingsley Hurst" <hurstkr@growzone.com.au>
Subject: RE: Europa-List: New Future Europa Pilot

--> Europa-List message posted by: "Kingsley Hurst" <hurstkr@growzone.com.au>

> I'm happy to announce that Amanda Ruth Christine Tuck was born on June
21st 
at 7.45 am. Her weight and balance sheet showed 9 lb. 3 oz.

Congratulations Martin, good news.  Rest assured there will be no
celebrations at this end if that happens to us.  Our youngest is 27.






________________________________  Message 2  _____________________________________


Time: 09:39:32 AM PST US
From: Paul Stewart <europa@pstewart.f2s.com>
Subject: Europa-List: painting

--> Europa-List message posted by: Paul Stewart <europa@pstewart.f2s.com>

Have folk painted the wing root ribs and spar or not? If not what about 
IV protection for these areas while on trailers etc. Grateful to know 
what  others have done

Regards

Paul Stewart
G-GIDY
sanding sanding sanding sand.......






________________________________  Message 3  _____________________________________


Time: 12:26:48 PM PST US
From: "Ronald J. Parigoris" <rparigor@suffolk.lib.ny.us>
Subject: Europa-List: Torque tube ball bearings?

--> Europa-List message posted by: "Ronald J. Parigoris" <rparigor@suffolk.lib.ny.us>

In the past week, 2 people, 1 of which was our DAR after looking at the now
bonded in torque tube bushings asked why we are using bushings instead of ball
bearings?

Has anyone installed ball bearings on the torque tube?

Has anyone ever had the bushings wear and need replacement?

Thx.
Ron Parigoris






________________________________  Message 4  _____________________________________


Time: 02:16:08 PM PST US
From: Rowland Carson <rowil@clara.net>
Subject: Re: Re: Europa-List: TAS Calculations

--> Europa-List message posted by: Rowland Carson <rowil@clara.net>

At 2005-06-23 18:58 -0500 Paul McAllister wrote:

>I didn't record the IAS

Paul - so, how do you know you were flying at the same speed on all 
legs? Same throttle setting (wide open) and trim will only give the 
same speed once stabilised at the same rate-of-climb (0, we hope).

Most of these TAS-from-GPS aids spring from the desire to determine 
whether the IAS is suffering from errors of varous sorts, in 
particular, installation-specific ones like position error.

I'm sure you'll enjoy repeating the lab work!

regards

Rowland
-- 
| Wilma & Rowland Carson <http://home.clara.net/rowil/>
| <rowil@clara.net>          ... that's Rowland with a 'w' ...






________________________________  Message 5  _____________________________________


Time: 02:16:08 PM PST US
From: Rowland Carson <rowil@clara.net>
Subject: RE: Re: Europa-List: TAS Calculations

--> Europa-List message posted by: Rowland Carson <rowil@clara.net>

At 2005-06-23 15:21 -0700 Rob Housman wrote:

>Not an unreasonable assumption, Rowland, but in this former colony (of
>Spain, that is) aviation WX includes temperature and dew point reported in
>degrees Celsius

Rob - my apologies! I engaged finger before selecting brain - Paul 
had clearly shown a "C" by his temperature value anyway.

regards

Rowland
-- 
| Wilma & Rowland Carson <http://home.clara.net/rowil/>
| <rowil@clara.net>          ... that's Rowland with a 'w' ...