---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 09/11/05: 17 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:36 AM - Flaring guide () 2. 06:42 AM - Re: Annual Inspection Check List (Fergus Kyle) 3. 06:43 AM - Off the topic - admin Garry Stout (Fergus Kyle) 4. 07:14 AM - Landing Light (Kevin And Ann Klinefelter) 5. 07:36 AM - Re: Off the topic - admin Garry Stout (J. Hilditch) 6. 07:38 AM - Re: Landing Light (J. Hilditch) 7. 07:45 AM - Re: Landing Light (J. Hilditch) 8. 08:03 AM - Re: Annual Inspection Check List (SteveD) 9. 08:18 AM - Free Stuff! (SteveD) 10. 08:28 AM - Annual Check list (BEBERRY@aol.com) 11. 08:52 AM - Re: Landing Light (Jeremy Davey) 12. 08:52 AM - Re: Flaring guide (Jeremy Davey) 13. 09:54 AM - [PLEASE READ] Matronics Upgrade Today 9/11/05 Sunday! (Matt Dralle) 14. 10:04 AM - Re: Flaring guide (josok) 15. 10:11 AM - Re: Off the topic - admin Garry Stout (Garry) 16. 11:50 PM - Re: Landing Light (Paul McAllister) 17. 11:53 PM - Re: Landing Light (rlborger) ________________________________ Message 1 _____________________________________ Time: 04:36:35 AM PST US From: Subject: Europa-List: Flaring guide --> Europa-List message posted by: > 1) Flaring the tubing =96 how much should the tubing be proud of the > flaring tool before I start? To be consistant use an epoxy mixing stick (tongue depressor) as a depth gauge, works good. Peter. ________________________________ Message 2 _____________________________________ Time: 06:42:21 AM PST US From: "Fergus Kyle" Subject: Europa-List: RE: Annual Inspection Check List --> Europa-List message posted by: "Fergus Kyle" | --> Europa-List message posted by: "Garry" | Ok, so call me stupid. I followed the link below, but cannot find any | attachments or checklists. How do I get an attachment? | Garry Stout Garry, No, you're not stupid - or I am because I didn't follow the right side of the message board far enough. If you got to the : http://www.europaowners.org/viewtopic.php?p=7379#7379 site, the EuropaBuilders Message Board, slide down to the fourth message "Maintenance Checklist v-p prop V2.doc" which [on the RIGHT side] contains a block stating "Download" - that's where you get the form. Is that OK? Ferg ________________________________ Message 3 _____________________________________ Time: 06:43:21 AM PST US From: "Fergus Kyle" Subject: Europa-List: Off the topic - admin Garry Stout --> Europa-List message posted by: "Fergus Kyle" Garry, Got this today in replying to your message: Host tampabay.rr.c not found The following recipients did not receive this message: Ferg ________________________________ Message 4 _____________________________________ Time: 07:14:31 AM PST US From: Kevin And Ann Klinefelter Subject: Europa-List: Landing Light --> Europa-List message posted by: Kevin And Ann Klinefelter Hi All, Does anyone have a simple landing light solution for the XS? What light works well and where to mount it. Thanks, Kevin N211KA working on electrical ________________________________ Message 5 _____________________________________ Time: 07:36:57 AM PST US From: "J. Hilditch" Subject: RE: Europa-List: Off the topic - admin Garry Stout --> Europa-List message posted by: "J. Hilditch" Try tampabay.rr.com, I think the address was truncated -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Fergus Kyle Subject: Europa-List: Off the topic - admin Garry Stout --> Europa-List message posted by: "Fergus Kyle" Garry, Got this today in replying to your message: Host tampabay.rr.c not found The following recipients did not receive this message: Ferg ________________________________ Message 6 _____________________________________ Time: 07:38:48 AM PST US From: "J. Hilditch" Subject: RE: Europa-List: Landing Light --> Europa-List message posted by: "J. Hilditch" You might try the following URL: http://www.killacycle.com/Lights.htm -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Kevin And Ann Klinefelter Subject: Europa-List: Landing Light --> Europa-List message posted by: Kevin And Ann Klinefelter --> Hi All, Does anyone have a simple landing light solution for the XS? What light works well and where to mount it. Thanks, Kevin N211KA working on electrical ________________________________ Message 7 _____________________________________ Time: 07:45:31 AM PST US From: "J. Hilditch" Subject: RE: Europa-List: Landing Light --> Europa-List message posted by: "J. Hilditch" Kevin, I forgot to also mention the following site: http://www.creativair.com/cva/ Jack -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Kevin And Ann Klinefelter Subject: Europa-List: Landing Light --> Europa-List message posted by: Kevin And Ann Klinefelter --> Hi All, Does anyone have a simple landing light solution for the XS? What light works well and where to mount it. Thanks, Kevin N211KA working on electrical ________________________________ Message 8 _____________________________________ Time: 08:03:32 AM PST US Subject: Europa-List: RE: Annual Inspection Check List From: "SteveD" --> Europa-List message posted by: "SteveD" There are now four more check lists posted in Document storage: http://www.europaowners.org/viewtopic.php?p=7391#7391 This is great information to develop your own check list. I've taken the liberty to remove personal information from the lists..... If yours is posted and for any reason you want it removed please let me know off list. I replied to Garry last night off list to help with his downloading Docs. Internet stuff can be frustrating as h*ll sometimes. Thanks to everyone that sent them, Steved. ---------------- Visit EuropaOwnersForum http://www.europaowners.org/ ________________________________ Message 9 _____________________________________ Time: 08:18:25 AM PST US Subject: Europa-List: Free Stuff! From: "SteveD" --> Europa-List message posted by: "SteveD" For people who don't visit EuropaOwners very often there is a section for people giving away Europa parts. Usually all that is required is postage. Got something laying around the garage that your never going to use, post it. http://www.europaowners.org/viewforum.php?f=29 Helps keep the fun in our dysfunctional Europa family : ) Steved. ---------------- Visit EuropaOwnersForum http://www.europaowners.org/ ________________________________ Message 10 ____________________________________ Time: 08:28:13 AM PST US From: BEBERRY@aol.com Subject: Europa-List: Annual Check list --> Europa-List message posted by: BEBERRY@aol.com Thanks for that. I had no difficulty in downloading and printing. Quite usefull. Patrick ________________________________ Message 11 ____________________________________ Time: 08:52:29 AM PST US From: "Jeremy Davey" Subject: RE: Europa-List: Landing Light --> Europa-List message posted by: "Jeremy Davey" Kevin, If it's any help, there is an offering available that does LED position lights and incandescent landing lights in the wing tip together. That's what I'm using in a desire to keep the light away from reflecting on the prop. Regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Europa Club Vice-Chairman, Webmaster, PFA NC Representative PFA EC Member If you can keep your head when all about you are losing theirs, then it is possible you haven't grasped the severity of the situation. Tail done Standard XS wings with mods underway CM installed in fuse (with airbrakes fittings) 1400 build hours to date Intended fit: Rotax 914 turbo, Airmaster CS fully-feathering prop Lots of lights, buttons, switches, gizmos, and alarms -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Kevin And Ann Klinefelter Subject: Europa-List: Landing Light --> Europa-List message posted by: Kevin And Ann Klinefelter Hi All, Does anyone have a simple landing light solution for the XS? What light works well and where to mount it. Thanks, Kevin N211KA working on electrical ________________________________ Message 12 ____________________________________ Time: 08:52:29 AM PST US From: "Jeremy Davey" Subject: RE: Europa-List: Flaring guide --> Europa-List message posted by: "Jeremy Davey" Thanks, Peter! Regards, Jeremy Jeremy Davey Europa Monowheel 537M G-EZZA Europa Club Vice-Chairman, Webmaster, PFA NC Representative PFA EC Member If you can keep your head when all about you are losing theirs, then it is possible you haven't grasped the severity of the situation. Tail done Standard XS wings with mods underway CM installed in fuse (with airbrakes fittings) 1400 build hours to date Intended fit: Rotax 914 turbo, Airmaster CS fully-feathering prop Lots of lights, buttons, switches, gizmos, and alarms -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of p-a.austin@xtra.co.nz Subject: Europa-List: Flaring guide --> Europa-List message posted by: > 1) Flaring the tubing =96 how much should the tubing be proud of the > flaring tool before I start? To be consistant use an epoxy mixing stick (tongue depressor) as a depth gauge, works good. Peter. ________________________________ Message 13 ____________________________________ Time: 09:54:18 AM PST US From: Matt Dralle Subject: Europa-List: [PLEASE READ] Matronics Upgrade Today 9/11/05 Sunday! --> Europa-List message posted by: Matt Dralle Dear Listers, I will be implementing some major upgrades to the Matronics infrastructure today, Sunday 09/11/2005. During the upgrade, web services such as the Archive Search Engine, List Browser, and the Subscription Page will not be available. Additionally, incoming and outgoing List Email will not be processed during this time, although no actual email should be lost only queued for later delivery. This is a rather substantial upgrade and includes moving all network, computer, and UPS equipment to a new systems rack. I hope to have everything back on line by 8PM PDT tonight or sooner if all goes well. This is an awesome upgrade that I've been wanting to do for a long time, and should help increase availability of the Matronics systems to near 99.99%! Thank you for your patience! Matt Dralle Matronics Email List Administrator Matt G Dralle | Matronics | PO Box 347 | Livermore | CA | 94551 925-606-1001 V | 925-606-6281 F | dralle@matronics.com Email http://www.matronics.com/ WWW | Featuring Products For Aircraft do not archive ________________________________ Message 14 ____________________________________ Time: 10:04:01 AM PST US Subject: Europa-List: RE: Flaring guide From: "josok" 1.41 REPLY_TO_EMPTY Reply-To: is empty --> Europa-List message posted by: "josok" Depends on the tool i guess, mine "Parker Rolo-flair", ACS has a gauge, that swings in place when the tool is opened. Tube against it, close and tighten, drop of oil, cone down, and the flare is perfect. No visible damage from the tightening either. The gauge, which looks like a hawk beak is visible on the picture attached. Regards, Jos Okhuijsen ---------------- This Email contains Photos or Attachments located at the following link: http://www.europaowners.org/viewtopic.php?p=7400#7400 ---------------- Visit EuropaOwnersForum http://www.europaowners.org/ ________________________________ Message 15 ____________________________________ Time: 10:11:35 AM PST US From: "Garry" Subject: Re: Europa-List: Off the topic - admin Garry Stout --> Europa-List message posted by: "Garry" Ferg, it's garrys@tampabay.rr.com Garry ----- Original Message ----- From: "Fergus Kyle" Subject: Europa-List: Off the topic - admin Garry Stout > --> Europa-List message posted by: "Fergus Kyle" > > Garry, > Got this today in replying to your message: > Host tampabay.rr.c not found > The following recipients did not receive this message: > > Ferg > > > > > > > ________________________________ Message 16 ____________________________________ Time: 11:50:44 PM PST US From: "Paul McAllister" Subject: Re: Europa-List: Landing Light --> Europa-List message posted by: "Paul McAllister" Kevin, I mounted mine in the out riggers and its worse than useless. Dave Anderson (who is no longer a member of the forum) mounted his in the cowl, one on each side I believe and he tells me that they work very nicely. Paul ________________________________ Message 17 ____________________________________ Time: 11:53:43 PM PST US From: rlborger Subject: Re: Europa-List: Landing Light --> Europa-List message posted by: rlborger Kevin, Check out: http://www.aerovisions.com/hid/index.html for a High Intensity Discharge solution for the landing light. I will probably try to add one of these somewhere on N914XL. I just wish I knew where and how... Good building and great flying, Bob Borger Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S http://www.europaowners.org/N914XL (85%) tail kit done, wings closed, cockpit module installed, pitch system in, landing gear frame in, rudder system in, outrigger mod in, Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in, flap drive in, Mod 70 done. Working in - 24 Instrument Panel, 25 Electrical, 28 Flaps, 29 Main Gear, 30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster on order. Seat arrived from Oregon Aero. Preparing ROTAX 914 for installation. 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117