---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 12/12/05: 6 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:35 AM - Re: Fuel sender etc. (JR(Bob) Gowing) 2. 02:02 AM - Doth Tuesday 13/12 (David Joyce) 3. 03:18 PM - Re: Fuel sender etc. (Kingsley Hurst) 4. 05:25 PM - testing testing testing, is this thing on? (Nic) 5. 06:17 PM - Popular Mechanics - 1 Week Sport Pilot School (Jim Pellien) 6. 07:34 PM - Re: Re: PFA Centre Tunnel Modification: was Battery location (Michel Auvray) ________________________________ Message 1 _____________________________________ Time: 01:35:18 AM PST US From: "JR(Bob) Gowing" Subject: Re: Europa-List: Fuel sender etc. --> Europa-List message posted by: "JR(Bob) Gowing" Fellow Builders This still seems to me to be the best fuel gauge that we, and I guess nearly all other builders could use in their projects. I could not at first comprehend how a sensor could be put within the line! Never thought of a "T" piece. Although I think it a great idea, unfortunatel I am not game enough to tackle it. I congratulate those who do. JR (Bob) Gowing UK Kit 327 in Oz do not archive ----- Original Message ----- From: "Paul McAllister" Subject: RE: Europa-List: Fuel sender etc. > --> Europa-List message posted by: "Paul McAllister" > > Mike et all. > > I think I purchased it from Allied Electronics see: > http://www.alliedelec.com/Search/ProductDetail.asp?SKU=642-2273&desc=26PCA > FA6D > > The rest of the components came fom Digikey, > > What would help everyone on the list is if someone would invest the time in > laying out a printed circuit board. A PCB would make it so even the most > faint hearted could successfully build this. > > Paul > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com]On Behalf Of Tony > Krzyzewski > To: europa-list@matronics.com > Subject: RE: Europa-List: Fuel sender etc. > > > --> Europa-List message posted by: "Tony Krzyzewski" > > Ps > > For those using my pressure sensor chip set there is a new low cost > prototyping board available for USD10 + p&p > > http://www.kiwacan.co.nz/products/kpic/kpic-2840p.shtml > > This board has a lot of the processor, timing and serial interface > related circuit board already laid out which will result in an easier > build of the pressure sensor. I have to build up another unit for myself > for a domestic water tank and I'll be using this board to build up the > circuit. Once I have done this I'll add some as built photos to the > existing documentation which can still be found at > www.kaon.co.nz/europa/fuelgaugev3.pdf > > Regards > > Tony > > > -- > > ________________________________ Message 2 _____________________________________ Time: 02:02:58 AM PST US From: "David Joyce" Subject: Europa-List: Doth Tuesday 13/12 --> Europa-List message posted by: "David Joyce" William & All, What about a Doth to Lundy Island tomorrow, Tuesday, aiming for 12 MD arrival to allow a bit of a walk round. Weather looks good, as long as not too much fog/mist. Wind predicted at 4kts only.Sea temp 12 C. - not exactly hot but not lethal. In any case just 10 miles of water to cross from Hartland Point so 3000 ft would leave you in gliding range of one shore all way over. Free landing in Pilot, altho you pay 3.50 to National Trust if not member. One of my very favourite destinations. Regards, David G-XSDJ ________________________________ Message 3 _____________________________________ Time: 03:18:57 PM PST US From: "Kingsley Hurst" Subject: Re: Europa-List: Fuel sender etc. --> Europa-List message posted by: "Kingsley Hurst" > What would help everyone on the list is if someone would invest the time > in > laying out a printed circuit board. A PCB would make it so even the most > faint hearted could successfully build this. Excellent idea Paul. Are you able to do it mate 'cause I certainly can't. Not for lack of time, just bereft of the required knowledge. Is there someone out there with the necessary skill and will to be able to do this for those like me who are intellectually challenged with electronic gizmos ? Regards to all Kingsley do not archive ________________________________ Message 4 _____________________________________ Time: 05:25:15 PM PST US From: "Nic" Subject: Europa-List: testing testing testing, is this thing on? --> Europa-List message posted by: "Nic" Merry New Years. Nic, a-145 :) ________________________________ Message 5 _____________________________________ Time: 06:17:35 PM PST US From: "Jim Pellien" Subject: Europa-List: Popular Mechanics - 1 Week Sport Pilot School --> Europa-List message posted by: "Jim Pellien" Popular Mechanics has sent an editor to take the 1-Week Sport Pilot School at the Sky Bryce Airport in Basye, VA. Davin Coburn is writing a daily "blog" of his learning experience at the Popular Mechanics main webpage: www.popularmechanics.com Jim Pellien Mid-Atlantic Sports Planes The Mid-Atlantic Region of SportsPlanes.com www.MASPL.com 703-313-4818 ________________________________ Message 6 _____________________________________ Time: 07:34:28 PM PST US From: "Michel Auvray" Subject: Re: Re: Europa-List: PFA Centre Tunnel Modification: was Battery location --> Europa-List message posted by: "Michel Auvray" Hi all, Do you have pictures of mod 68: outriggers>flap assembly Thanks Michel AUVRAY builder 145 > > = = = = = = = = = ========= = = = = = = = = = Michel Auvray mau11@free.fr 13/12/2005