Today's Message Index:
----------------------
1. 10:14 AM - Re: Re Oil Changes (Jeff B)
2. 12:29 PM - Canadians (Fergus Kyle)
3. 04:00 PM - Re: Door gas strut life? (SPurpura@aol.com)
4. 04:12 PM - Re: Door gas strut life? (Rman)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Re Oil Changes |
--> Europa-List message posted by: Jeff B <topglock@cox.net>
Sorry for the late reply, I've been flying for the past week. I change
my oil at 25-30 hours, as I occasionally use 100LL. No complaints from
the Rotax, so far...
Jeff - Baby Blue
185 hours...
Mike Parkin wrote:
> --> Europa-List message posted by: "Mike Parkin" <mikenjulie.parkin@btopenworld.com>
>
> My Rotax 914 Maintenance manual says:
>
> After the first 25 hrs, then every 100 hours..
>
> It calls for every 50 hrs if using leaded fuel.
>
> Is my manual out of date, or have I missed something.
>
> regards,
>
> Mike
>
>
>
>
>
>
>
>
>
>
>
>
>
>
>
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Europa-List message posted by: "Fergus Kyle" <VE3LVO@rac.ca>
Cheers,
I have managed to acquire the address of a dispenser of Araldite
2012 adhesive, that which was deleivered with my kit, lo, these many moons
ago.
Unaware of the demise of CIBA/Geigy and its ramifications, I sought tro
duplicate the victories of several year ago by this means.
I have unearthed "MF Composites Inc." in Cambridge ON at
519-622-0589, Fax ---622-5791 or 1-877-376-9948 (Danny Schrier up) or at:
dannys@mfcomposites.com or www...................
They are in 540 Sheldon Drive, Cambridge ON N1T 2C1.
Aside from the unncessary pint tins and greater, there are dual cartidges of
50ml [at about C$20] which can be dispensed by equal pressure on two vials
(or a C$60 pump). The cartridges are about 5inches long by 3/4inch diam.each
side.
The test is underway now, but future silence from me indicates perfect
bonding to specs. With these cartridges come mixing nozzles which
undoubtedly will mix the adhesive well, but will harden with at least 10ml
still in them. The nozzles are almost as expensive as the adhesive [at
C$15] - squeeze and mix later as previously with the now-unobtainable tubes,
alas.
If you have superior intelligence, why didn't you say so earlier?
Humbly,
Ferg Kyle
Europa A064 914 Classic
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Door gas strut life? |
--> Europa-List message posted by: SPurpura@aol.com
After 4 years per original installation mine are still fine,try McMaster Carr
for replacements.
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Door gas strut life? |
--> Europa-List message posted by: Rman <topglock@cox.net>
Europa has them in stock at a reasonable price. Support your
manufacturer...
Jeff - Baby Blue
185 hours...
SPurpura@aol.com wrote:
>--> Europa-List message posted by: SPurpura@aol.com
>
>After 4 years per original installation mine are still fine,try McMaster Carr
>for replacements.
>
>
>
>
>
>
>
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|