---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Wed 05/24/06: 5 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 06:08 AM - Brake seals (Paul McAllister) 2. 06:45 AM - Re: Brake seals (Michael Grass) 3. 06:54 AM - Re: Brake seals (Jeff B) 4. 07:14 AM - Re: Brake seals (Bill Henderson) 5. 09:46 AM - Steel nose wheel springs - Mod 71 (Richard Holder) ________________________________ Message 1 _____________________________________ Time: 06:08:54 AM PST US From: "Paul McAllister" Subject: Europa-List: Brake seals --> Europa-List message posted by: "Paul McAllister" Hi all, The brake cylinder( the one with the lever on it, not at the one on the wheel) on my mono wheel has sprung a leak. Would anyone happen to be able to suggest a source for the seals. I know I can get them from the factory, but I want to fix my aircraft before this weekend. Any info on the manufacturer of this cylinder and potential source of local parts would be appreciated. Thanks, Paul ________________________________ Message 2 _____________________________________ Time: 06:45:22 AM PST US From: "Michael Grass" Subject: Re: Europa-List: Brake seals --> Europa-List message posted by: "Michael Grass" Paul, you might give Matco a call. I know Europa sourced a lot through them but I am not to sure about the mono. There are a lot more products available then on the web site http://www.matcomfg.com. Regards Michael Grass A266 Trigear, Detroit ----- Original Message ----- From: "Paul McAllister" Sent: Wednesday, May 24, 2006 9:02 AM Subject: Europa-List: Brake seals > --> Europa-List message posted by: "Paul McAllister" > > > Hi all, > > The brake cylinder( the one with the lever on it, not at the one on the > wheel) on my mono wheel has sprung a leak. > > Would anyone happen to be able to suggest a source for the seals. I know > I > can get them from the factory, but I want to fix my aircraft before this > weekend. Any info on the manufacturer of this cylinder and potential > source > of local parts would be appreciated. > > Thanks, Paul > > > ________________________________ Message 3 _____________________________________ Time: 06:54:07 AM PST US From: Jeff B Subject: Re: Europa-List: Brake seals --> Europa-List message posted by: Jeff B Paul, When looking for seals for N55XS, I took the originals to a local Car Quest and we started going through the book. After opening a few boxes, we found one that fit. These were for the tri-gear. My guess is that you would have the same luck with the mono parts... Jeff - Baby Blue 185 hours Paul McAllister wrote: > --> Europa-List message posted by: "Paul McAllister" > > Hi all, > > The brake cylinder( the one with the lever on it, not at the one on the > wheel) on my mono wheel has sprung a leak. > > Would anyone happen to be able to suggest a source for the seals. I know I > can get them from the factory, but I want to fix my aircraft before this > weekend. Any info on the manufacturer of this cylinder and potential source > of local parts would be appreciated. > > Thanks, Paul > > > > > > > > > > > > > > > ________________________________ Message 4 _____________________________________ Time: 07:14:37 AM PST US From: "Bill Henderson" Subject: Re: Europa-List: Brake seals --> Europa-List message posted by: "Bill Henderson" Paul, I looked up the company on the internet. Here's the URL to their site. http://www.kartcomponents.com/productsbrakingsystems.htm If you scroll down to the bottom of the page you'll see our "master cylinder". I'm assuming you have the same one I got with my Classic kit..... You might can give them a call to see if someone in the US has replacement parts. Bill A010 Monowheel Classic Still Building ----- Original Message ----- From: "Paul McAllister" Sent: Wednesday, May 24, 2006 9:02 AM Subject: Europa-List: Brake seals > --> Europa-List message posted by: "Paul McAllister" > > > Hi all, > > The brake cylinder( the one with the lever on it, not at the one on the > wheel) on my mono wheel has sprung a leak. > > Would anyone happen to be able to suggest a source for the seals. I know > I > can get them from the factory, but I want to fix my aircraft before this > weekend. Any info on the manufacturer of this cylinder and potential > source > of local parts would be appreciated. > > Thanks, Paul > > > ________________________________ Message 5 _____________________________________ Time: 09:46:20 AM PST US From: Richard Holder Subject: Europa-List: Steel nose wheel springs - Mod 71 --> Europa-List message posted by: Richard Holder Team Mod 71 has now appeared on the Europa web site. It is 75 plus VAT pus shipping for the pair of springs. The installation guide (.pdf) is also available for download. Roger of E04 said he a few to get out so orders can be placed now for delivery "soon" ! Richard Holder G-OWWW High Cross