Europa-List Digest Archive

Fri 06/09/06


Total Messages Posted: 14



Today's Message Index:
----------------------
 
     1. 12:09 AM - Re: Problems with Europa 2004?? (BEBERRY@aol.com)
     2. 01:20 AM - Re: Problems with Europa 2004?? (G-IANI)
     3. 02:53 AM - Re: oil cooler (Klaus Dietrich)
     4. 02:53 AM - Re: Problems with Europa 2004?? (Trevpond@aol.com)
     5. 07:25 AM - Re: 914UL on Classic Europa Motorglider? (jbolyard)
     6. 10:55 AM - Re: Problems with Europa 2004?? (Jeff B)
     7. 11:02 AM - Re: Re: oil cooler (Thomas Scherer)
     8. 01:12 PM - Re: DOTH - North Coates Summer Fly-in? (Bryan Allsop)
     9. 01:52 PM - Airmaster brushes (Dean Seitz)
    10. 03:59 PM - Re: DOTH - North Coates Summer Fly-in? (R.C.Harrison)
    11. 03:59 PM - Re: DOTH - North Coates Summer Fly-in? (APethers@aol.com)
    12. 07:34 PM - E'04 (Robert Borger)
    13. 09:07 PM - Re: Airmaster brushes (Cliff Shaw)
    14. 11:14 PM - Re: Airmaster brushes (Tony Krzyzewski)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:09:14 AM PST US
    From: BEBERRY@aol.com
    Subject: Re: Problems with Europa 2004??
    I have not found any problems with Europa 2004, in fact quite the contrary. I have had a few problems recently which needed various spare parts to resolve and have found that the service received has alaways been very prompt and puntual. I always deal by telephone, which is answered courtously and am about to do so again today. The last very small parts that I ordered were delived with compliments and no charge! Patrick


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:20:40 AM PST US
    From: "G-IANI" <g-iani@ntlworld.com>
    Subject: Problems with Europa 2004??
    Bob How did you place your orders and ask your questions? I believe E'04 has not been to good at picking up the e-mails. As Patrick has said they are very responsive via telephone. Ian Rickard #505 G-IANI XS Trigear Europa Club Mods Rep (Trigear) e-mail mods@europaclub.org.uk or direct g-iani@ntlworld.com


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:53:52 AM PST US
    From: Klaus Dietrich <klaus.dietrich@oracle.com>
    CC: thomas@scherer.com
    Subject: Re: oil cooler
    the exact reference for the MK1 oil cooler from Think Automotive is OC1103-8 and cost is GBP 40,- incl VAT Klaus Klaus Dietrich wrote: > Hallo Thomas, > > den lkhler fr den Rotax 912 (Mk1 Installation) bekommst Du bei > http://www.thinkauto.com/ > Ich habe mir selbst einen vor ca 6 Monaten dort bers Online Shop gekauft. > Wegen der Dimension bzw genauen Bezeichnung und Anschlsse mu ich > nochmals zu Hause auf der Rechnung nachsehen und kann es Dir dann > morgen mailen. > > Gru > Klaus (OE-CKD) > -- > Klaus Dietrich > Oracle Financing EMEA > Tel/Fax: +43 1 33 777 825 > http://eofd.oraclecorp.com > > > > -- Klaus Dietrich Oracle Financing EMEA Tel/Fax: +43 1 33 777 825 http://eofd.oraclecorp.com


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:53:52 AM PST US
    From: Trevpond@aol.com
    Subject: Re: Problems with Europa 2004??
    Hi All, Absolutely no problem with the Company, was with them last week and things are going quite well - they would like to sell some more kits tho. Trev Pond Kit 598 Flying, Flying and still smiling.


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:25:05 AM PST US
    Subject: RE: 914UL on Classic Europa Motorglider?
    From: "jbolyard" <jbolyard@uwf.edu>
    --> Europa-List message posted by: "jbolyard" <jbolyard@uwf.edu> Greetings Again, To answer my own question, Roger Bull has informed me that there is no such prohibition. John Bolyard A052 ---------------- Visit EuropaOwnersForum http://www.europaowners.org/


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:55:27 AM PST US
    From: Jeff B <topglock@cox.net>
    Subject: Re: Problems with Europa 2004??
    --> Europa-List message posted by: Jeff B <topglock@cox.net> Bob, I had problems getting my calls to go through, over the past few days. Not a Euproa thing, but apparantly communications problems between our respective countries. I sent John Wheeler an email, asking him to call, when he could. Two days later I got the call, made my order and chatted with John for a few minutes. It appears that they have been very busy, of late, what with Andy leaving and getting the new engineer up and going. I have had problems reaching them, in the past, via email, but faxes seem to get a prompt response. Try a different mode of communication... Jeff - Baby Blue 189 hours rlborger wrote: > Europaphiles, > > What's with E'04? Over the last couple months I have placed several > orders for various parts/components and have asked some technical > questions. I have not even received a simple reply or > even acknowledgment. What's with them? I trust they aren't in trouble > again? If anyone happens to be in the shop would you please give them a > swift kick in the a** for me. > > Thanks, > > Bob Borger > > Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S > > http://www.europaowners.org/N914XL > > (85%) tail kit done, wings closed, cockpit module installed, pitch > system in, landing gear frame in, rudder system in, outrigger mod in, > Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in, > flap drive in, Mod 70 done. Baggage bay in. Working in - 24 Instrument > Panel, 25 Electrical, 28 Flaps, 29 Main Gear, 30 Fuel System, 32 Tail, > 34 Door Latches & 35 Doors, 37 Finishing. Airmaster arrived 29 Sep > 05. Seat arrived from Oregon Aero. Preparing ROTAX 914 for installation. > > 3705 Lynchburg Dr. > > Corinth, TX 76208 > > Home: 940-497-2123 > > Cel: 817-992-1117 > > > > > ------------------------------------------------------------------------ > --


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:02:58 AM PST US
    From: "Thomas Scherer" <thomas@scherer.com>
    Subject: Re: oil cooler
    Hallo Klaus, danke f=FCr die Info. Insbesondere die Webseite des Herstellers ! Damit weisst Du mehr, als die Leute bei Europa. Ein builder aus Kanada hat mir seinen ungebrauchten (weil 912S) K=FChler angeboten und den werde ich erst Mal einbauen und sehen, ob die K=FChlung f=FCr die neuen Anbauten (Turbo-Normalisierung) gen=FCgt. Alles Gute ! <Thomas, N81EU> ----- Original Message ----- From: "Klaus Dietrich" To: "Europa-List Digest Server" Subject: Europa-List: Re: oil cooler Date: Fri, 09 Jun 2006 11:49:24 +0200 the exact reference for the MK1 oil cooler from Think Automotive is OC1103-8 and cost is GBP 40,- incl VAT Klaus Klaus Dietrich wrote: Hallo Thomas, den =D6lk=FChler f=FCr den Rotax 912 (Mk1 Installation) bekommst Du bei http://www.thinkauto.com/ Ich habe mir selbst einen vor ca 6 Monaten dort =FCbers Online Shop gekauft. Wegen der Dimension bzw genauen Bezeichnung und Anschl=FCsse mu=DF ich nochmals zu Hause auf der Rechnung nachsehen und kann es Dir dann morgen mailen. Gru=DF Klaus (OE-CKD) -- Klaus Dietrich Oracle Financing EMEA Tel/Fax: +43 1 33 777 825 http://eofd.oraclecorp.com -- Klaus Dietrich Oracle Financing EMEA Tel/Fax: +43 1 33 777 825 http://eofd.oraclecorp.com


    Message 8


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:12:19 PM PST US
    From: "Bryan Allsop" <bryan@blackballclub.com>
    Subject: Re: DOTH - North Coates Summer Fly-in?
    Hi Alan, Life's a bitch! My wife has told me I have got to flying on Sunday. I am not sure about this, but DOTHing on Sunday at mid day seems to be my only choice. I hope that "food" includes bacon butties. I may see someone I know there. Even Mr Harrison's machine could get that far. Cheers Bryan. G BYSA ----- Original Message ----- From: APethers@aol.com To: europa-list@matronics.com Sent: Thursday, June 08, 2006 11:43 AM Subject: Europa-List: DOTH - North Coates Summer Fly-in? Hi, If you're looking for a venue for a DOTH this weekend then North Coates are having a Summer Fly-in. This is over both Saturday and Sunday, food, camping and a warm welcome. Runway 05/23 660 metres x 22 metres Grass Telephone: 01472 388 850 Airfield North Coates Radio 120.15 A/G AVGAS is available, current price is =A31.20 per litre for non members Please see Website for more details: http://homepage.ntlworld.com/northcoatesflyingclub/index.html See you there, Alan Petherbridge Part Owner of G-OGAN (based @ North Coates) Tri Gear Europa Kit # 100


    Message 9


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 01:52:42 PM PST US
    From: "Dean Seitz" <daseitz@cfl.rr.com>
    Subject: Airmaster brushes
    --> Europa-List message posted by: "Dean Seitz" <daseitz@cfl.rr.com> Has anyone gotten brushes for the Airmaster cs prop from anywhere other than New Zealand? Just wondering if there was anywhere closer to the states than Airmaster. Shipping from there will probably be more than the parts. Dean Seitz N284A


    Message 10


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:59:50 PM PST US
    From: "R.C.Harrison" <ptag.dev@tiscali.co.uk>
    Subject: DOTH - North Coates Summer Fly-in?
    Hi! Bryan That=92s bloody cruel! Watch it =85=85every dog has it=92s day ! Yours wouldn=92t b=85 get there if it=92s engine was in a box. Bob H Do not archive. Robt.C.Harrison -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Bryan Allsop Sent: 09 June 2006 21:08 Subject: Re: Europa-List: DOTH - North Coates Summer Fly-in? Hi Alan, Life's a bitch! My wife has told me I have got to flying on Sunday. I am not sure about this, but DOTHing on Sunday at mid day seems to be my only choice. I hope that "food" includes bacon butties. I may see someone I know there. Even Mr Harrison's machine could get that far. Cheers Bryan. G BYSA ----- Original Message ----- From: APethers@aol.com Sent: Thursday, June 08, 2006 11:43 AM Subject: Europa-List: DOTH - North Coates Summer Fly-in? Hi, If you're looking for a venue for a DOTH this weekend then North Coates are having a Summer Fly-in. This is over both Saturday and Sunday, food, camping and a warm welcome. Runway 05/23 660 metres x 22 metres Grass Telephone: 01472 388 850 Airfield North Coates Radio 120.15 A/G AVGAS is available, current price is =A31.20 per litre for non members Please see Website for more details: http://homepage.ntlworld.com/northcoatesflyingclub/index.html See you there, Alan Petherbridge Part Owner of G-OGAN (based @ North Coates) Tri Gear Europa Kit # 100


    Message 11


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 03:59:50 PM PST US
    From: APethers@aol.com
    Subject: Re: DOTH - North Coates Summer Fly-in?
    Hi Bryan, I'm there both Saturday and Sunday See you on Sunday, he breakfast buns are really worth flying in for Regards Alan


    Message 12


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:34:47 PM PST US
    Cc: Robert Borger <rlborger@mac.com>
    From: Robert Borger <rlborger@mac.com>
    Subject: E'04
    --> Europa-List message posted by: Robert Borger <rlborger@mac.com> Europaphiles, I have received a reply from Roger. Necessary parts have been sent. The less pressing orders are awaiting some backorder bits so they can all be shipped at one time. No technical help at all, but then with Andy gone, I guess that's to be expected for a while. I will try to send my technical questions on to Nev. He's such a good chap about helping. I hope that one day I can have the opportunity to buy him a nice dinner at the establishment of his choice as an expression of my gratitude. Good building and great flying, Bob Borger Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S http://www.europaowners.org/N914XL (85%) tail kit done, wings closed, cockpit module installed, pitch system in, landing gear complete, rudder system in with Singleton Mod, outrigger mod in, Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in, flap drive in, Mod 70 done, baggage bay in. Completing the firewall-aft fuel system and fitting the instrument panel. Working on firewall forward fuel system, Singleton firewall & engine mount. Waiting on Europa interior kit. Working in - 24 Instrument Panel, 25 Electrical, 28 Flaps, 30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Preparing for ROTAX 914 installation. 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117


    Message 13


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 09:07:55 PM PST US
    From: "Cliff Shaw" <flyinggpa@comcast.net>
    Subject: Re: Airmaster brushes
    Dean I thought my first set wore down quite fast. I had lots of black dust around the front of the engine. I installed a replacement from Airmaster last year. Now there is no dust and the brushes are as good as new. I think there is a change in the brushes. I would suggest you sent them an Email and get your new brush set from them. That is what I did. Cliff Shaw 1041 Euclid ave. Edmonds, WA 98020 425 776 5555 http://www.europaowners.org/WileE ----- Original Message ----- From: Dean Seitz To: europa-list@matronics.com Sent: Friday, June 09, 2006 1:50 PM Subject: Europa-List: Airmaster brushes --> Europa-List message posted by: "Dean Seitz" <daseitz@cfl.rr.com> Has anyone gotten brushes for the Airmaster cs prop from anywhere other than New Zealand? Just wondering if there was anywhere closer to the states than Airmaster. Shipping from there will probably be more than the parts. Dean Seitz N284A ========================= ========== ========================= ========== ========================= ========== ========================= ==========


    Message 14


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:14:31 PM PST US
    Subject: Airmaster brushes
    From: "Tony Krzyzewski" <tonyk@kaon.co.nz>
    Ask Martin to send the brushes by Air Mail. You'll get them in around a week and the actual cost of posting them is around USD3 from NZ to the US. Regards Tony ________________________________ From: owner-europa-list-server@matronics.com on behalf of Dean Seitz Sent: Sat 10/06/2006 8:50 a.m. Subject: Europa-List: Airmaster brushes --> Europa-List message posted by: "Dean Seitz" <daseitz@cfl.rr.com> Has anyone gotten brushes for the Airmaster cs prop from anywhere other than New Zealand? Just wondering if there was anywhere closer to the states than Airmaster. Shipping from there will probably be more than the parts. Dean Seitz N284A ========================= ========== <https://netilla.kaon.co.nz/,host=www.matronics.com,port,proto=h ttp/Navigator?Europa-List> ========================= ========== <https://netilla.kaon.co.nz/,host=wiki.matronics.com,port,proto= http/> ========================= ========== <https://netilla.kaon.co.nz/,host=www.matronics.com,port,proto=h ttp/contribution> ========================= ==========




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Full Archive Search Engine
  •   http://www.matronics.com/search
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contributions

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --