Today's Message Index:
----------------------
1. 03:26 AM - Re: Favorite cable guide and wire holders? (Kingsley Hurst)
2. 06:55 PM - Re: Favorite cable guide and wire holders? (Dean Seitz)
3. 09:30 PM - Starboard radiator for classic needed please. (jcarter@doctors.org.uk)
4. 09:37 PM - binx nuts (Paul Stewart)
5. 09:45 PM - Is there 1 hose and 1/8" under flap cross tube? ()
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Favorite cable guide and wire holders? |
> What is favorite way to adhere to baggage bay ribs? Going through fuse?
Ron,
Attached is what I did. The clamps in the baggage bay did not have their
bolts inserted at the time this photo was taken.
Note that I extended the black tubing back underneath the flap drive cross
tube because the cables just touch the tube when the flaps are down. I have
fitted Graham Singleton's tail wheel mod which elevates the cable at the
rear end more than the factory set-up.
Cheers
Kingsley in Oz.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Favorite cable guide and wire holders? |
--> Europa-List message posted by: "Dean Seitz" <daseitz@cfl.rr.com>
ClickBond are about the best. But not cheap. Metal base with tiewrap or
threaded stud, made to be glued on. They will never come off. Being as we
use hundreds of them a month at work they are easy for me to get. They are
made for aviation. http://www.clickbond.com/ They are sold by Aircraft
Spruce.
Dean Seitz
----- Original Message -----
From: <rparigor@suffolk.lib.ny.us>
Sent: Wednesday, August 16, 2006 12:25 PM
Subject: Europa-List: Favorite cable guide and wire holders?
> --> Europa-List message posted by: <rparigor@suffolk.lib.ny.us>
>
> What is favorite rudder cable guides material?
>
> Nylaflow or Nylo-Seal? (Nylaflow is thinner wall, slight more flexible)
>
> What is favorite way to adhere to baggage bay ribs? Going through fuse?
>
>
> What is favorite way of holding wires in aft fuse?
>
> Do supplied sticky back ty-wrap bases really hold up in use?
>
> Is preference to use bases, but stick another way? Redux?
>
> Any other preferences?
>
> Thx.
> Ron Parigoris
>
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Starboard radiator for classic needed please. |
--> Europa-List message posted by: jcarter@doctors.org.uk
Dear list members,
My starboard radiator has had some minor damage and it needs replacing. Europa
don't have one on the shelf and unfortunately the company that supplies europa
cant produce such a radiator in under 6 weeks so im (desperately) looking about
for such an item to get into the air again.
Does anyone have a spare radiator that I may buy?
Many thanks in anticipation,
Justin Carter,
(912S classic trigear based at fishburn.)
Email,
jcarter@doctors.org.uk
phone: 07814478831
________________________________________________________________________
Doctors.net.uk education: totally independent, totally free.
http://www.doctors.net.uk/education
________________________________________________________________________
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
--> Europa-List message posted by: Paul Stewart <paul@pstewart.f2s.com>
We have just re fitted our engine having removed it for fuselage
painting. The M10 binx nuts don't seem to feel as 'stiff' on
tightening as they did. Are they by any chance one use only - and we
are using them the correct way round with the flat against the engine
frame?????
Regards
Paul
G-GIDY
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Is there 1 hose and 1/8" under flap cross tube? |
--> Europa-List message posted by: <rparigor@suffolk.lib.ny.us>
I would like to run my 4 fuel lines down the center of the tunnel.
Is there clearance between the bottom of the flap cross tube dip in the
center (down position) for 1 fuel line diameter and 1/8"?
This is on XS Monowheel w 914 and tank drains.
Thx.
Ron Parigoris
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|