Today's Message Index:
----------------------
1. 01:38 AM - Re: brake master cylinder, bungee cord (UVTReith@aol.com)
2. 05:52 AM - Re: brake master cylinder, bungee cord (Hans Siedsma)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: brake master cylinder, bungee cord |
Answering Karl Heindl's question: How is your Smart engine coming along.
My Monowheel XS (D-EUVT) is now ready build and we made the wing test in
July.
The result was very good and the inspector signed off that.
I will get the baby now to Vlasim (Czech Republic) for painting, fine
trimming and engine hanging. Definately the plane will be ready for the coming
season.
Europa XS Monowheel short wing with smart-Brabus 102 HP turbocharged engine
and at first with the new curved ground adjustabe Woodcomp 3-blade prop.
As there is no direct adaption on the smart engine for the vacuum system - I
have to do a special bracket with bearings and belt drive, to use the free
belt pulley of the air-conditioning pump - I thing about to change the
Instruments from the standard sixpack to a Dynon D 100 display.
Therefore for sale are brand new items like Rapco Vacuum pump, suction
regulator, filter assembly, suction gauge, attitude gyro and directional gyro.
If there is somebody interested in, he can get the whole lot for 980,00 EUR.
When the baby has made it's first fly, I will inform the forum about the
results.
Bruno Reith
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | brake master cylinder, bungee cord |
--> Europa-List message posted by: "Hans Siedsma" <hsiedsma@inter.nl.net>
Klaus
I have both items available. I have the bungee cord new and also the master
cylinder for the monowheel.
I changed to a Tri gear and will mount the springs instead of the bungee
cord in my plane.
Hans Siedsma
-----Oorspronkelijk bericht-----
Van: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com]Namens Steve Hagar
Verzonden: Thursday, September 21, 2006 6:20 AM
Aan: europa-list@matronics.com
Onderwerp: Re: Europa-List: brake master cylinder, bungee cord
--> Europa-List message posted by: "Steve Hagar" <hagargs@earthlink.net>
You might try installing the Matco Master cylinder hand brake assy that
goes on the control stick. I have that installed on my plane with a few
mods. It makes it real handy for ground handling and pushing the plane
around as you can reach in to the stick and brake. Its handy as my plane
has to go up and down a small incline on the driveway and it is easy to
modulate the speed to reach in to the stick.
Steve
Steve Hagar
hagargs@earthlink.net
> [Original Message]
> From: Ralph Hallett <n100rh@sbcglobal.net>
> To: <europa-list@matronics.com>
> Date: 9/19/2006 1:40:31 PM
> Subject: Re: Europa-List: brake master cylinder, bungee cord
>
> --> Europa-List message posted by: Ralph Hallett <n100rh@sbcglobal.net>
>
> Roger,
> It is so nice to see a Europa representative show up on the list ;) Hope
> all is well with you and your mates.
>
> Ralph
>
> Roger Bull wrote:
> > Klaus,
> >
> > As a last resort, if all else fails, and no other avenue is available,
> > you could try Europa!
> >
> > Roger
> >
> > -----Original Message-----
> > *From:* owner-europa-list-server@matronics.com
> > [mailto:owner-europa-list-server@matronics.com]*On Behalf Of
> > *Klaus Dietrich
> > *Sent:* 19 September 2006 3:15 pm
> > *To:* Europa-List Digest Server
> > *Subject:* Europa-List: brake master cylinder, bungee cord
> >
> > during my annual (950hrs) I have discovered that my bungee cord is
> > getting a little tired...
> > anybody knows the diameter (in inches) and the length, so I can
> > order it from Spruce?
> >
> > It seems I would also need a new brake master cylinder (Monowheel
> > MkI) as mine doesn't come back easily once released after applying
> > brake pressure; is anyone (who modified to trigear) selling his
> > one? Or any clue where to purchase a new cylinder?
> >
> > Thanks!
> > Klaus
> > --
> > Klaus Dietrich
> > Oracle Financing EMEA
> > Tel/Fax: +43 1 33 777 825
> > http://eofd.oraclecorp.com
> >
> >
> >
> >
> > *
> >
> >
> > *
> >
> > *
> >
> >
> > *
>
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|