Today's Message Index:
----------------------
0. 12:40 AM - WLAS [Please Read] (Matt Dralle)
1. 05:02 AM - TrueTrack Auotopilot (Klaus Dietrich)
2. 05:23 AM - Re: TrueTrack Auotopilot (mau11@free.fr)
3. 05:27 AM - Re: Rotax 912 Spark plug torque setting (mau11@free.fr)
4. 06:41 AM - Re: TrueTrack Auotopilot (nigel charles)
5. 09:42 AM - Re: Rotax 912 Spark plug torque setting ()
6. 10:48 AM - Re: UV Smooth Prime (Richard Scanlan)
7. 11:13 AM - Re: Oil cooler thermostat (Horizonspace@aol.com)
8. 01:16 PM - Re: TrueTrack Auotopilot (Carl Pattinson)
9. 02:11 PM - Re: TrueTrack Auotopilot (Duncan & Ami McFadyean)
10. 02:22 PM - Re: TrueTrack Auotopilot (Peter Rees)
11. 02:22 PM - Re: word #### PIT (Tim Ward)
12. 03:18 PM - Re: Doors for Europa (Belinda Glover)
13. 03:37 PM - Re: word #### PIT (Europa List)
14. 03:40 PM - Circuit Diagram - Issue 4 (Dave Moore)
Message 0
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | WLAS [Please Read] |
Dear Listers,
I sat down at the 'ol computer tonight to have a look at a few of the nice comments
List Members have been including along with their Contributions this year.
I was amazed at how many I found and even more amazed at some of the very nice
things Listers have been saying about the Lists and how valuable the they
are to them.
I've included quite a few of these nice comments below. Please read over some
of this great Lister feedback. No doubt you will find that you agree with at
least one or two of those comments - maybe all of them! If you find that do,
won't you please make a Contribution to support these Lists today!! Its fast
and easy with the Matronics List Contribution Web Site:
http://www.matronics.com/contribution
Don't forget that I've now fully implemented the new *List Fund Raiser Squelch*
feature that will automatically intercept any future iterations of my "Please
Contribute" messages -- that is, *once you've made YOUR Contribution*! How cool
is that? (Make sure the email address you enter along with your Contribution
matches exactly your subscribed List email address. An exact match is how
it works.)
Thank you for your generous Contributions this year and for all the wonderful comments!!
Matt Dralle
Matronics Email List Administrator
================= What Listers Are Saying (WLAS) ================
Absolutely the best deal on the Internet!!
-Owen B
I love The Matronics...
-Robeto B
My wife has her soaps & I've got my lists!
-Hal B
These lists are, indeed, the lifeline of our hobby.
-Bob R
The best source of information for my a/c.
-Tony C
The Zenith list is the first thing I read in the morning.
-Herbert H
You do more good than you can imagine. I wish I'd known
about you while I was building my Kitfox, but you are
still an after-the-fact resource.
-Ben B
..an excellent site.
-Ashley M
The "List" has been the ultimate help for my Zenith
CH 701 project!!
-Brian U
I appreciate the list being here for me.
-Geoff H
..a great service.
-William C
The List continues to be an interesting and useful facility.
-David M
Your list is a constant goad to keep me working on my project.
-Thomas S
..a great service.
-Robert W
The Pietenpol list is a great resource.
-Benjamin W
The Yak-list is Awesome!
-James S
..great service.
-Robert S
The features you have implemented recently have you poised
to knock out yahoo groups...
-Danny D
I like how your forum looks/works and the list service...
-Ken E
..great service.
-David P
Very useful web site.
-Wayne E
..a very valuable service.
-Chris D
Great sites...
-Randall R
I used to look at [that other] site also but it's gotten so
cluttered with advertising that I've stopped looking at it.
-Wayne E
Without your services, the build would be a grope in the dark...
-Fergus K
The information and help I've received greatly outweighs the
donation...
-Lee P
..great service!
-Christopher D
I really don't think I could be building my plane without the
wisdom I find on this list.
-William G
It really makes building a pleasure.
-James P
..great service.
-Doug W
I'm getting near the end of my build (Europa tri XS) don't
think I could have done it with out the help of the forum.
-Stanislaus S
Marvelous service. Couldn't have done it without you.
-Jim G
Love the list, this is a wonderful way to help others...
-Michael S
..good service.
-Derek L
The list is responsible for helping me complete this project
and educating me in the process.
-Jeff D
Definitely worth the donation.
-Ron L
..great service to the aviation community.
-Tony P
I have been flying my plane for 5 years (RV-6) but I still
get valuable information from this service.
-Don N
A very helpful site.
-Roland S
It's a great community to be part of.
-David L
Great sites.
-John C
A great place to find and share not only information but to
meet people across the country and make lasting relationships.
-Uncle Craig
Great facility.
-Peter H
Its a great source of information!
-Michael W
Great improvements to the List...
-Edward A
Great service!!!
-Rich D
..great resource!
-William C
..excellent lists!
-Michael S
Couldn't have built my RV4 without the list.
-Warren M
..a great service...
-James N
I would not have missed [the list] for anything during the
building of my Europa.
-Svein J
..another great year.
-Robert D
..this [is an] essential builder's resource.
-David A
..excellent service.
-Gregory B
I've learned a huge amount of "stuff" over the past year
and look forward to it every day!
-Smith M
..a great communication tool...
-Jon M
Finished building 5 years ago, but still are lurking on
your great list!
-Lothar K
..a valuable service. At 11:00 pm Matronics is the goto
place for my RV questions.
-Mike D
================= What Listers Are Saying (WLAS) ================
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | TrueTrack Auotopilot |
I'm about to install the True Track autopilot with altitude hold into my
Europa MkI (monowheel) and wondering where best to install the pitch servo.
Anybody out there who did such an 2 achses a/p installation already?
(the roll servo installation seems to be reasonable simple)
Thanks,
Klaus
Klaus Dietrich
Oracle Financing EMEA
Tel/Fax: +43 1 33 777 825
http://eofd.oraclecorp.com
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: TrueTrack Auotopilot |
Salut Klaus
Comment vas-tu?
Depuis que je suis a la retraite, j'ai repris une activit de pilote largueur de
parachutistes a Chalon sur saone.
je travaille avec mon fils qui a achet un Pilatus.
Je viens de commander un altitude hold Altrak VS pour mon Europa, je l'ai recu
au jourd'hui.
Une question: j'ai recu l'altitude hold sans le potentiometre de rglage de la
vitesse verticale,juste le bouton de mise en marche, je pense que c'est un
Altrak standard et non pas un Altrak VS, aurais tu une information a me
communiquer a ce sujet?
Merci, si tu passes dans le coin de Chalon n'hsites pas a t'arrter on a une
station de 95 unleaded a 200m.
On te verra avec plaisir, j'ai dja eu la visite de Michael Scherf la saison
passe.
Salutations
AUVRAY MICHEL
mau11@free.fr
Selon Klaus Dietrich <klaus.dietrich@oracle.com>:
> I'm about to install the True Track autopilot with altitude hold into my
> Europa MkI (monowheel) and wondering where best to install the pitch servo.
> Anybody out there who did such an 2 achses a/p installation already?
> (the roll servo installation seems to be reasonable simple)
>
> Thanks,
> Klaus
>
> Klaus Dietrich
> Oracle Financing EMEA
> Tel/Fax: +43 1 33 777 825
> http://eofd.oraclecorp.com
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rotax 912 Spark plug torque setting |
I confirm spark plug torque is 20nm.
Michel Auvray
Builder No 145-300 hours flight
mau11@free.fr
Selon "ivor.phillips" <ivor.phillips@ntlworld.com>:
> <ivor.phillips@ntlworld.com>
>
> Hi Thomas
> Its 20 nm or 180 in lb
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of Thomas Scherer
> Sent: 12 November 2006 21:54
> To: europa-list@matronics.com
> Subject: Europa-List: Rotax 912 Spark plug torque setting
>
>
> to which torque please is a 912 spark plug to be tightened (cold engine) ?
>
> I am going back to the original pistons after experimenting with the Xtra
> (15 hp more ?) pistons.
>
> Thanks
>
> <Thomas, N81EU>
>
>
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | TrueTrack Auotopilot |
Hi Klaus
I have not seen the True Track autopilot servo but assuming it is no
bigger than the Navaid one there is no reason why you shouldn't use the
standard mod I produced for the Navaid servo installation. This uses one
of the underseat lockers for the servo with a small hole through the
bracing plywood to the torque tube tunnel. See the mod on the club
website for details. If you need further assistance come back to me
direct at nwcmc@tiscali.co.uk
Nigel Charles
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Klaus
Dietrich
Sent: 13 November 2006 13:05
Subject: [Norton AntiSpam] Europa-List: TrueTrack Auotopilot
I'm about to install the True Track autopilot with altitude hold into my
Europa MkI (monowheel) and wondering where best to install the pitch
servo.
Anybody out there who did such an 2 achses a/p installation already?
(the roll servo installation seems to be reasonable simple)
Thanks,
Klaus
Klaus Dietrich
Oracle Financing EMEA
Tel/Fax: +43 1 33 777 825
http://eofd.oraclecorp.com
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Rotax 912 Spark plug torque setting |
Hello Thomas
I know on the 914 that the torque is different as compared to the manual I
downloaded (bout a year aga with updates) if you use the Whacker thermal
conductive compound. The Whacker use is in on of Rotax notices and was
issued before 2000.
If you need an immediate answer, call Lockwood or other Service Center.
If can't find, let me know and will look it up at the hanger.
BTW what don't you like about the Xtra pistons?
Ron Parigoris
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Hi Bob, contact is avgashead@btinternet.com. Also got a spare pair if
doors with glass fitted and locking mechanism if you know anybody who is
interested. Richard
Richard Scanlan
Aspen
2 Fulford Way
Woodbury
Exeter
EX5 1NZ
01395 233151
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
R.C.Harrison
Sent: 12 November 2006 15:13
Subject: RE: Europa-List: UV Smooth Prime
Richard
What's your contact address ?
Bob Harrison G-PTAG
Do not archive.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Richard
Scanlan
Sent: 12 November 2006 19:29
Subject: RE: Europa-List: UV Smooth Prime
Anybody interested in a gallon of pre-prime sealer. I've got a gallon
with hardener, which is not being used as I've handed the finishing over
to the pro's. A few quid and UK postage if anyone's interested, contact
me off forum.
Richard Scanlan #103
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Oil cooler thermostat |
In a message dated 11/12/2006 5:06:39 P.M. Central Standard Time,
karelvranken@hotmail.com writes:
Svein,
I bought the oil thermostat in Germany by the Rotax dealer Franz. The syste
m
is quiet simple and the instructions for installation are clear. You neet t
o
ask for the connections you want. You can find all this on the net. Franz
Aircraft de. search under Zubeh=F6r =F6lthermostat.
Best regards,
Karel Vranken.
----- Original Message -----
From: _Sidsel & Svein Johnsen_ (mailto:sidsel.svein@oslo.online.no)
Sent: Sunday, November 12, 2006 10:11 AM
Subject: Europa-List: Oil cooler thermostat
Lockwood sells an oil cooler thermostat, presumably suitable for Rotax 912S
.
- Anyone with good experience using this to keep oil temp acceptably high
(problem at my latitudes)?
- Does it come with good installation instructions?
- What other fittings are required to connect it to standard Europa oil
system?
- Any good alternatives?
Thanks!
Best regards,
Svein
LN-SKJ
Svein,
We have both the Mocal and the Permacool unit from Lockwood and will most
likely install the Mocal. The Permacool seems to be just a cheap imitation
of
the Mocal. Here are the characteristics we observed:
Mocal: Milled aluminum body; available in several AN-fittings; comes with
mounting bracket
Permacool: Cast aluminum body; 1/2 NPT fittings; no bracket
Both units are identical in size and shape.
Regards,
Tam
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: TrueTrack Auotopilot |
vCard
My understanding is that your Europa club mod for the Navaid servo is
for roll as opposed to pitch.
Presumably the altitude hold would require pitch input. It would be
difficult to modify controls in the cockpit module to fit such a servo.
Probably much simpler to fit aft of the cockpit module but in any event
a retrofit will be difficult.
Carl Pattinson
G-LABS (Mk1 Europa)
----- Original Message -----
From: nigel charles
To: europa-list@matronics.com
Sent: Monday, November 13, 2006 2:35 PM
Subject: RE: Europa-List: TrueTrack Auotopilot
Hi Klaus
I have not seen the True Track autopilot servo but assuming it is no
bigger than the Navaid one there is no reason why you shouldn't use the
standard mod I produced for the Navaid servo installation. This uses one
of the underseat lockers for the servo with a small hole through the
bracing plywood to the torque tube tunnel. See the mod on the club
website for details. If you need further assistance come back to me
direct at nwcmc@tiscali.co.uk
Nigel Charles
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Klaus
Dietrich
Sent: 13 November 2006 13:05
To: Europa-List Digest Server
Subject: [Norton AntiSpam] Europa-List: TrueTrack Auotopilot
I'm about to install the True Track autopilot with altitude hold into
my Europa MkI (monowheel) and wondering where best to install the pitch
servo.
Anybody out there who did such an 2 achses a/p installation already?
(the roll servo installation seems to be reasonable simple)
Thanks,
Klaus
Klaus Dietrich
Oracle Financing EMEA
Tel/Fax: +43 1 33 777 825
http://eofd.oraclecorp.com
-- Please Support Your Lists This Month -- (And Get
Some AWESOME FREE Gifts!) November is the Annual List Fund Raiser.
Click on the Contribution link below to find out more about this
year's Terrific Free Incentive Gifts provided by: * AeroElectric
www.aeroelectric.com * The Builder's Bookstore www.buildersbooks.com
* Aeroware Enterprises www.kitlog.com * HomebuiltHELP
www.homebuilthelp.com List Contribution Web Site --> Thank you
for your generous support! -Matt Dralle,
List Admin. - The Europa-List Email Forum - -->
http://www.matronics.com/Navigator?Europa-List
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: TrueTrack Auotopilot |
If you haven't already looked, there are some ideas at
http://www.trutrakflightsystems.com/documents/LegacyPitchandRoll.pdf
although if the bolt shown were to loosen then the cyclical bending
loads could lead to distress. Probably unlikely, but the consequences of
failure here don't bear thinking about.
Duncan McF.
----- Original Message -----
From: Klaus Dietrich
To: Europa-List Digest Server
Sent: Monday, November 13, 2006 1:04 PM
Subject: Europa-List: TrueTrack Auotopilot
I'm about to install the True Track autopilot with altitude hold into
my Europa MkI (monowheel) and wondering where best to install the pitch
servo.
Anybody out there who did such an 2 achses a/p installation already?
(the roll servo installation seems to be reasonable simple)
Thanks,
Klaus
Klaus Dietrich
Oracle Financing EMEA
Tel/Fax: +43 1 33 777 825
http://eofd.oraclecorp.com
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: TrueTrack Auotopilot |
vCardIf you take a look at:
http://www.trioavionics.com/literature.htm
If you download the altitude hold document, you can see how Trio
recommend doing it - I think that they say you can't just grab hold of
the elevator push rod as a small proportion of the servos push could be
turned into rotation by the rose joints with the consequence of a system
that spends its life 'hunting'.
Peter
----- Original Message -----
From: Carl Pattinson
To: europa-list@matronics.com
Sent: Monday, November 13, 2006 9:15 PM
Subject: Re: Europa-List: TrueTrack Auotopilot
My understanding is that your Europa club mod for the Navaid servo is
for roll as opposed to pitch.
Presumably the altitude hold would require pitch input. It would be
difficult to modify controls in the cockpit module to fit such a servo.
Probably much simpler to fit aft of the cockpit module but in any
event a retrofit will be difficult.
Carl Pattinson
G-LABS (Mk1 Europa)
----- Original Message -----
From: nigel charles
To: europa-list@matronics.com
Sent: Monday, November 13, 2006 2:35 PM
Subject: RE: Europa-List: TrueTrack Auotopilot
Hi Klaus
I have not seen the True Track autopilot servo but assuming it is no
bigger than the Navaid one there is no reason why you shouldn't use the
standard mod I produced for the Navaid servo installation. This uses one
of the underseat lockers for the servo with a small hole through the
bracing plywood to the torque tube tunnel. See the mod on the club
website for details. If you need further assistance come back to me
direct at nwcmc@tiscali.co.uk
Nigel Charles
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Klaus
Dietrich
Sent: 13 November 2006 13:05
To: Europa-List Digest Server
Subject: [Norton AntiSpam] Europa-List: TrueTrack Auotopilot
I'm about to install the True Track autopilot with altitude hold
into my Europa MkI (monowheel) and wondering where best to install the
pitch servo.
Anybody out there who did such an 2 achses a/p installation already?
(the roll servo installation seems to be reasonable simple)
Thanks,
Klaus
Klaus Dietrich
Oracle Financing EMEA
Tel/Fax: +43 1 33 777 825
http://eofd.oraclecorp.com
-- Please Support Your Lists This Month -- (And Get
Some AWESOME FREE Gifts!) November is the Annual List Fund Raiser.
Click on the Contribution link below to find out more about this
year's Terrific Free Incentive Gifts provided by: * AeroElectric
www.aeroelectric.com * The Builder's Bookstore www.buildersbooks.com
* Aeroware Enterprises www.kitlog.com * HomebuiltHELP
www.homebuilthelp.com List Contribution Web Site --> Thank you
for your generous support! -Matt Dralle,
List Admin. - The Europa-List Email Forum - -->
http://www.matronics.com/Navigator?Europa-List
href="http://www.aeroelectric.com">www.aeroelectric.com
href="http://www.buildersbooks.com">www.buildersbooks.com
href="http://www.kitlog.com">www.kitlog.com
href="http://www.homebuilthelp.com">www.homebuilthelp.com
href="http://www.matronics.com/Navigator?Europa-List">http://www.matron
Message 11
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Europa-List:word #### PIT |
Carl,
Interesting to see that the word '#### pit' is not 'PC' anymore and should be
referred to as the flight deck as #### pit is ####ruled out!! The increasing number
of female pilots in the industry has brought about discrimination in the
use of the word. Their alternative we thought was OK however that was ruled
out as well. So we are left with flight deck.
So when referring to the #### pit module it is now the flight deck module!!!!
Must be getting old!
Any comments?
Cheers,
Tim
--
Tim Ward
12 Waiwetu Street
Fendalton
Christchurch.
Ph. 64 33515166
MOB 0210640221
ward.t@xtra.co.nz
---- Carl Pattinson <carl@flyers.freeserve.co.uk> wrote:
> vCard
>
> My understanding is that your Europa club mod for the Navaid servo is for roll
as opposed to pitch.
>
> Presumably the altitude hold would require pitch input. It would be difficult
to modify controls in the ####### module to fit such a servo.
>
> Probably much simpler to fit aft of the ####### module but in any event a retrofit
will be difficult.
>
> Carl Pattinson
> G-LABS (Mk1 Europa)
>
>
Message 12
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Doors for Europa |
Hi, if I rebuild our Europa again , I will need the doors a second time!
Will be collecting ebay purchase in Exeter next weekend.01295 788526 or
07713710892
Regards
Gary
----- Original Message -----
From: Richard Scanlan
To: europa-list@matronics.com
Sent: Monday, November 13, 2006 6:43 PM
Subject: RE: Europa-List: UV Smooth Prime
Hi Bob, contact is avgashead@btinternet.com. Also got a spare pair if
doors with glass fitted and locking mechanism if you know anybody who is
interested. Richard
Richard Scanlan
Aspen
2 Fulford Way
Woodbury
Exeter
EX5 1NZ
01395 233151
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of
R.C.Harrison
Sent: 12 November 2006 15:13
To: europa-list@matronics.com
Subject: RE: Europa-List: UV Smooth Prime
Richard
What's your contact address ?
Bob Harrison G-PTAG
Do not archive.
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Richard
Scanlan
Sent: 12 November 2006 19:29
To: europa-list@matronics.com
Subject: RE: Europa-List: UV Smooth Prime
Anybody interested in a gallon of pre-prime sealer. I've got a gallon
with hardener, which is not being used as I've handed the finishing over
to the pro's. A few quid and UK postage if anyone's interested, contact
me off forum.
Richard Scanlan #103
-- Please Support Your Lists This Month -- (And Get
Some AWESOME FREE Gifts!) November is the Annual List Fund Raiser.
Click on the Contribution link below to find out more about this
year's Terrific Free Incentive Gifts provided by: * AeroElectric
www.aeroelectric.com * The Builder's Bookstore www.buildersbooks.com
* Aeroware Enterprises www.kitlog.com * HomebuiltHELP
www.homebuilthelp.com List Contribution Web Site --> Thank you
for your generous support! -Matt Dralle,
List Admin. - The Europa-List Email Forum - -->
http://www.matronics.com/Navigator?Europa-List
Message 13
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Europa-List:word #### PIT |
Perhaps us male pilots can refer to a ####pit, while female pilots refer to
it as a #####pit.
Just a thought
Vaughn
----- Original Message -----
From: "Tim Ward" <ward.t@xtra.co.nz>
Sent: Monday, November 13, 2006 5:21 PM
Subject: Re: Europa-List:word #### PIT
>
> Carl,
> Interesting to see that the word '#### pit' is not 'PC' anymore and
> should be referred to as the flight deck as #### pit is ####ruled out!!
> The increasing number of female pilots in the industry has brought about
> discrimination in the use of the word. Their alternative we thought was OK
> however that was ruled out as well. So we are left with flight deck.
> So when referring to the #### pit module it is now the flight deck
> module!!!!
> Must be getting old!
> Any comments?
>
> Cheers,
> Tim
> --
> Tim Ward
> 12 Waiwetu Street
> Fendalton
> Christchurch.
> Ph. 64 33515166
> MOB 0210640221
> ward.t@xtra.co.nz
>
> ---- Carl Pattinson <carl@flyers.freeserve.co.uk> wrote:
>> vCard
>>
>> My understanding is that your Europa club mod for the Navaid servo is for
>> roll as opposed to pitch.
>>
>> Presumably the altitude hold would require pitch input. It would be
>> difficult to modify controls in the ####### module to fit such a servo.
>>
>> Probably much simpler to fit aft of the ####### module but in any event a
>> retrofit will be difficult.
>>
>> Carl Pattinson
>> G-LABS (Mk1 Europa)
>>
>>
>
>
>
Message 14
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Circuit Diagram - Issue 4 |
Hi,
Back in July, on this forum, Mike Gregory mentioned an Issue 4 of the
wiring circuit diagram.
How / where can I get hold of a copy.?
Both the Factory and Club websites' pdf build manuals show Issue 1
circuit diagrams. (As does my 2003 build manual).
With thanks,
Dave Moore
Monowheel #550
Aberdeen, UK.
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|