Today's Message Index:
----------------------
1. 06:09 AM - Anyone need a replacement starter? (rlborger)
2. 09:24 AM - Old Style Rotax Starter Has Been Claimed (rlborger)
3. 12:20 PM - Re: Anyone need a replacement starter? (Tim Ward)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Anyone need a replacement starter? |
Fellow Europaphiles:
I have just replaced the original old-style little black starter on
my 914 with one of the new high-power starters. (SB-914-023)
I would be happy to offer the original starter, brand new, never
used, to anyone out there who needs a replacement starter for their
912 (80 HP). You may have it for the cost of shipping it to you.
I'd guess that it could be shipped just about anywhere for less than
50USD or 30UKP as it cost 25USD to get the new (heavier) starter to
me here in Texas from Florida. BTW, you will need to supply the two
european-style split lock-washers but otherwise all hardware bits
(spacers and nuts) come with it.
First come basis. I'll post to the list when someone has claimed it.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
(85%) tail kit done, wings closed, cockpit module installed, pitch
system in, landing gear frame in, rudder system in, outrigger mod in,
Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
in, flap drive in, Mod 70 done. Baggage bay in. Flaps & Main Gear
complete. Working in - 24 Instrument Panel, 25 Electrical, 30 Fuel
System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster
arrived 29 Sep 05. Seat arrived from Oregon Aero. E04 interior kit
has arrived. Preparing for ROTAX 914 installation.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Old Style Rotax Starter Has Been Claimed |
Fellow Europaphiles,
The old style Rotax starter has been claimed.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
(85%) tail kit done, wings closed, cockpit module installed, pitch
system in, landing gear frame in, rudder system in, outrigger mod in,
Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar
in, flap drive in, Mod 70 done. Baggage bay in. Flaps & Main Gear
complete. Working in - 24 Instrument Panel, 25 Electrical, 30 Fuel
System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster
arrived 29 Sep 05. Seat arrived from Oregon Aero. E04 interior kit
has arrived. Preparing for ROTAX 914 installation.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Anyone need a replacement starter? |
Bob,
I would be interested. Please email me at;
ward.t@xtra.co.nz
Cheers,
Tim
Tim Ward
12 Waiwetu Street,
Fendalton,
Christchurch, 8052
New Zealand
Ph +64 3 3515166
Mobile 021 0640221
ward.t@xtra.co.nz
----- Original Message -----
From: rlborger
To: europa-list@matronics.com
Sent: Saturday, December 23, 2006 3:07 AM
Subject: Europa-List: Anyone need a replacement starter?
Fellow Europaphiles:
I have just replaced the original old-style little black starter on my
914 with one of the new high-power starters. (SB-914-023)
I would be happy to offer the original starter, brand new, never used,
to anyone out there who needs a replacement starter for their 912 (80
HP). You may have it for the cost of shipping it to you. I'd guess
that it could be shipped just about anywhere for less than 50USD or
30UKP as it cost 25USD to get the new (heavier) starter to me here in
Texas from Florida. BTW, you will need to supply the two european-style
split lock-washers but otherwise all hardware bits (spacers and nuts)
come with it.
First come basis. I'll post to the list when someone has claimed it.
Good building and great flying,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/N914XL
(85%) tail kit done, wings closed, cockpit module installed, pitch
system in, landing gear frame in, rudder system in, outrigger mod in,
Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in,
flap drive in, Mod 70 done. Baggage bay in. Flaps & Main Gear
complete. Working in - 24 Instrument Panel, 25 Electrical, 30 Fuel
System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster
arrived 29 Sep 05. Seat arrived from Oregon Aero. E04 interior kit has
arrived. Preparing for ROTAX 914 installation.
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|