Today's Message Index:
----------------------
1. 05:42 PM - Fuel supply for Rotax 914 (Ross)
2. 07:12 PM - Urgent Help with Customs Officials (Alan Burrows)
3. 09:31 PM - Re: Fuel supply for Rotax 914 (josok)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Fuel supply for Rotax 914 |
Hi All,
I am fitting my aircraft with a 914 engine and am about to install the
fuel system as per the latest amendment to the Europa Manual (Page 5-3
Nov. 2004). This system includes 2 one way check valves but doesn't
state what brand of valves should be used. Does anyone have a working
system similar to the amendment, and if so, what check valves were
installed? Also did you alter the layout to reduce the amount of T
junctions installed?
Thanks, Ross
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Urgent Help with Customs Officials |
Hi Guys, still trying to get our europa through customs at Jacksonville.
I
am trying to finish filling in the EPA form. I have put in the obvious
stuff
like date of build and serial number but I have to choose a box to check
under certified and non certified engines. Well I think un certified is
the
way to go but it is a sheer guess since I do not have any paperwork from
Rotax saying it is certified. So, if I go for uncertified is it
=93other non
road compression- ignition engines. See 40CFR part 89 or parts 1039 and
1068=94 ?? This is a Rotax 914 engine. It started life in our Europa and
has
always been there.. I just do not know what to list it as on the EPA
form
3520-21.
I would really appreciate any help forthcoming.
Thanks
Alan
--
21/12/2006
18:45
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Fuel supply for Rotax 914 |
Hi Ross,
The Europa fire wall forward for the 914 does contain 2 Andair check valves. The fuel system in kit600 is near completion but does not work yet. It is done in soft alu tubing and AN fittings. I like the bright colors :-) Pictures at http://www.europaowners.org/kit600 look for fuel system.
Ferg Kyle has drawings in his picture gallery of a manifold based fuel system,
and it reduces the amount of T junctions considerably.
Hope it helps, kind regards,
Jos Okhuijsen
Visit - www.EuropaOwners.org
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|