---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Thu 03/08/07: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 04:02 AM - Off topic (Kingsley Hurst) 2. 09:39 AM - Re: Cool running Jab (Graham Singleton) 3. 11:23 AM - New US Rep for Europa (Robert Borger) 4. 01:38 PM - Re: New US Rep for Europa (Peter Zutrauen) 5. 03:04 PM - Re: New US Rep for Europa (Garry) 6. 03:15 PM - Re: New US Rep for Europa (rlborger) 7. 07:12 PM - Re: Re: New US Rep for Europa (Bob) ________________________________ Message 1 _____________________________________ Time: 04:02:40 AM PST US From: "Kingsley Hurst" Subject: Europa-List: Off topic Attn Neville Eyre. Nev if you see this, would you be kind enough to contact me by email at hurstkr@redzone.com.au please. Have tried to contact you directly at your email address on more than one occasion but I suspect a spam filter or the like may have stopped you from getting them. Cheers Kingsley do not archive ________________________________ Message 2 _____________________________________ Time: 09:39:21 AM PST US From: Graham Singleton Subject: Re: Europa-List: Cool running Jab John I would very much like to see your photos when you're back in Tennessee. Up to now I've had very little to do with Jab's but have lived with a Lycoming for a while in my Long EZ. The EZ crowd have done a lot of development and testing with some success. There are some guys near me who recently bought a Europa with a Jab and aren't having much luck with it, quite apart from the overheating there isn't much power either, 300 fpm climb rate! Not a lot of use, bye for now Graham TELEDYNMCS@aol.com wrote: > In a message dated 3/7/2007 2:59:17 AM Eastern Standard Time, > europa-list@matronics.com writes: > > > Hey Graham, > > N245E has a cool running 3300 installed. It didn't start out that way, > but I've arrived at a combo that seems to work quite well. I > One thing that is probably different on mine is I used the Suncoast > Sportplanes FWF. I think most of the folks who are having overheating > issues on Jab powered Europa's are using the stock Jab cowls. Suncoast's > cowls use round intakes. > > John Lawton > Dunlap, TN (TN89) > N245E - Flying - 90 hours ________________________________ Message 3 _____________________________________ Time: 11:23:25 AM PST US From: Robert Borger Subject: Europa-List: New US Rep for Europa U.S.A. Europaphiles: Has anyone else noticed that there is a new "sole agent for sales of the Europa in the U.S.A."? Contact Mr. Bud Yerly of Custom Flight Creations He and his company are now listed on the Europa "Contacts" page. http://www.customflightcreations.com/ Located near Lakeland. Just thought you'd like to know, Good building and great flying, Bob Borger ________________________________ Message 4 _____________________________________ Time: 01:38:59 PM PST US Subject: RE: Europa-List: New US Rep for Europa From: "Peter Zutrauen" Has FLight-crafters re-incarnated? Or is this indeed a new co.? Do Not Archive -----Original Message----- From: owner-europa-list-server@matronics.com on behalf of Robert Borger Sent: Thu 08/03/2007 2:21 PM To: europa-list@matronics.com Cc: Subject: Europa-List: New US Rep for Europa U.S.A. Europaphiles: Has anyone else noticed that there is a new "sole agent for sales of the Europa in the U.S.A."? Contact Mr. Bud Yerly of Custom Flight Creations He and his company are now listed on the Europa "Contacts" page. http://www.customflightcreations.com/ Located near Lakeland. Just thought you'd like to know, Good building and great flying, Bob Borger ________________________________ Message 5 _____________________________________ Time: 03:04:59 PM PST US From: "Garry" Subject: Re: Europa-List: New US Rep for Europa FlightCrafters is alive and well and has been operating at the Zephyrhills airport (near Sun N'Fun) for about 2 years now. I am building my RV 7A there. FlightCrafters remains a "builders assistance center", for Europas, Jabirus, RVs, Zeniths and whatever else may come along. Bud Yerly of Custom Flight Creations was a former employee at FlightCrafters and started his own business about the time that FlightCrafters moved from Seffner to Zephyrhills. Bud's business pretty much specializes in Europas and Bud is a superb craftsman and a true Europa expert. Garry Stout ----- Original Message ----- From: "Peter Zutrauen" Sent: Thursday, March 08, 2007 4:37 PM Subject: RE: Europa-List: New US Rep for Europa > > Has FLight-crafters re-incarnated? Or is this indeed a new co.? > > Do Not Archive > > -----Original Message----- > From: owner-europa-list-server@matronics.com on behalf of Robert Borger > Sent: Thu 08/03/2007 2:21 PM > To: europa-list@matronics.com > Cc: > Subject: Europa-List: New US Rep for Europa > > > > U.S.A. Europaphiles: > > Has anyone else noticed that there is a new "sole agent for sales of the > Europa in the U.S.A."? > > Contact Mr. Bud Yerly of Custom Flight Creations > > He and his company are now listed on the Europa "Contacts" page. > > http://www.customflightcreations.com/ > > Located near Lakeland. > > Just thought you'd like to know, > > Good building and great flying, > Bob Borger > > > ________________________________ Message 6 _____________________________________ Time: 03:15:57 PM PST US Subject: Europa-List: RE: New US Rep for Europa From: rlborger Peter, You asked: Has FLight-crafters re-incarnated? Or is this indeed a new co.? Do Not Archive FlightCrafters still exists in the same old location with the same folks, Bob Berube & Rus LePre. Only now they appear to be dedicated to the Zenith line of kit aircraft as they are Zenith distributors. Custom Flight Creations is a different company. Good building and great flying, Bob Borger Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S http://www.europaowners.org/N914XL (85%) tail kit done, wings closed, cockpit module installed, pitch system in, landing gear frame in, rudder system in, outrigger mod in, Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in, flap drive in, Mod 70 done. Baggage bay in. Flaps & Main Gear complete. Working in - 24 Instrument Panel, 25 Electrical, 30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster arrived 29 Sep 05. Seat arrived from Oregon Aero. E04 interior kit has arrived and is being installed. Waiting on Mod 72 to resume installing the ROTAX 914. 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117 ________________________________ Message 7 _____________________________________ Time: 07:12:21 PM PST US From: "Bob" Subject: Re: Europa-List: RE: New US Rep for Europa Regarding Flight Crafters, we are still a builder assistance center for Europa's as well as Van's RV's, Jabirus, Sonex, Zeniths or other designs. We have formed another Company (Zenith Distributing)that sells the Zenith line of aircraft as well as manufacturing the quick build kit for the 701. 2 years ago we moved to Zephyrhills Municipal Airport to better accomodate our expansion needs. Flight Creations is a different company located at our previous facility. Regards, Bob Berube Flight Crafters 5048 Airport Rd. Zephyrhills, FL. 33542 813 779-1156 ----- Original Message ----- From: rlborger To: Peter Zutrauen ; europa-list@matronics.com Sent: Thursday, March 08, 2007 6:13 PM Subject: Europa-List: RE: New US Rep for Europa Peter, You asked: Has FLight-crafters re-incarnated? Or is this indeed a new co.? Do Not Archive FlightCrafters still exists in the same old location with the same folks, Bob Berube & Rus LePre. Only now they appear to be dedicated to the Zenith line of kit aircraft as they are Zenith distributors. Custom Flight Creations is a different company. Good building and great flying, Bob Borger Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S http://www.europaowners.org/N914XL (85%) tail kit done, wings closed, cockpit module installed, pitch system in, landing gear frame in, rudder system in, outrigger mod in, Fuselage Top on, lift/drag/flap pins in, wing incidence set, tie bar in, flap drive in, Mod 70 done. Baggage bay in. Flaps & Main Gear complete. Working in - 24 Instrument Panel, 25 Electrical, 30 Fuel System, 32 Tail, 34 Door Latches & 35 Doors, 37 Finishing. Airmaster arrived 29 Sep 05. Seat arrived from Oregon Aero. E04 interior kit has arrived and is being installed. Waiting on Mod 72 to resume installing the ROTAX 914. 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117 ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.