Europa-List Digest Archive

Sat 01/19/08


Total Messages Posted: 4



Today's Message Index:
----------------------
 
     1. 07:45 AM - Panel cutting hint (Fergus Kyle)
     2. 10:14 AM - Save Malmi Aiport (Alan Burrows)
     3. 10:49 AM - Re: Save Malmi Aiport (Raimo Toivio)
     4. 12:22 PM - Re: Save Malmi Aiport (craig bastin)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:45:06 AM PST US
    From: "Fergus Kyle" <VE3LVO@rac.ca>
    Subject: Panel cutting hint
    Thanks to Peter Field et al for the Subject topic. Being in my eleventh year from delivery date, I'm past that phase, but have the following hint to share: When in UK I bought a box full of 0.5mm drill bits, an inexpensive hobby facet for which UK is abundant supplier. When carving composite materials (such as canoe cut-outs and panel sites) I insert one bit in my high-speed granddad of the Dremel series (35k RPM), draw an accurate outline, and plunge the bit in to start. Angled slightly to permit line tracing, I slowly follow the line around 'til the job is done. Carefully done, the result is a 0.5+/-mm cut that should (but not necessarily) be done before finishing. It leaves an almost imperceptible gap which is easily finished. Did I lose any bits from overheating? - yes, but I just kept spinning with the remnant 'til there wasn't some. At 6p or whatever it was quick, accurate and fairly cheap. This little tidbit I bring to the Altar of Knowledge. Ferg Europa 914 mono CS prop Wiring wiring wiring


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:14:55 AM PST US
    From: "Alan Burrows" <alan@kestrel-insurance.com>
    Subject: Save Malmi Aiport
    Hi Everyone, A friend asked me to forward the following as he could not post to the list. As some of you might know, Malmi airport in Helsinki is under threat, the planners want to put a few houses on top.of it. If you want to offer your support please sign the pettiton at http://www.pelastamalmi.org/en Alan ************************************ European Comanche Tribe Mailing List ---- To post simply send messages to list@comancheflyer-eur.com ----- ************************************ 18/01/2008 19:32


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 10:49:24 AM PST US
    From: "Raimo Toivio" <raimo.toivio@rwm.fi>
    Subject: Re: Save Malmi Aiport
    Thanks Alan, Malmi (EFHF) is an only real cityairport in Finland and also one of the few Unesco=B4s World Heritage objects. Please sign, Raimo OH-XRT Europa XS Mono #417 The Experimental of The Year 2007 37500 Lempaala Finland tel + 358 3 3753 777 fax + 358 3 3753 100 gsm + 358 40 590 1450 raimo.toivio@rwm.fi www.rwm.fi ----- Original Message ----- From: Alan Burrows To: europa-list@matronics.com Sent: Saturday, January 19, 2008 8:06 PM Subject: Europa-List: Save Malmi Aiport Hi Everyone, A friend asked me to forward the following as he could not post to the list. As some of you might know, Malmi airport in Helsinki is under threat, the planners want to put a few houses on top.of it. If you want to offer your support please sign the pettiton at http://www.pelastamalmi.org/en Alan ************************************ European Comanche Tribe Mailing List ---- To post simply send messages to list@comancheflyer-eur.com ----- ************************************


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 12:22:12 PM PST US
    From: "craig bastin" <craigb@onthenet.com.au>
    Subject: Save Malmi Aiport
    signed do not archive -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com]On Behalf Of Alan Burrows Sent: Sunday, 20 January 2008 4:07 AM To: europa-list@matronics.com Subject: Europa-List: Save Malmi Aiport Hi Everyone, A friend asked me to forward the following as he could not post to the list. As some of you might know, Malmi airport in Helsinki is under threat, the planners want to put a few houses on top.of it. If you want to offer your support please sign the pettiton at http://www.pelastamalmi.org/en Alan ************************************ European Comanche Tribe Mailing List ---- To post simply send messages to list@comancheflyer-eur.com ----- ************************************ 7:32 PM




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --