---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 01/21/08: 3 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:21 PM - John Hurst at Sebring (John & Paddy Wigney) 2. 04:06 PM - Silencer position in cowl (Keith Hickling) 3. 06:24 PM - Re: Silencer position in cowl (SteveD) ________________________________ Message 1 _____________________________________ Time: 12:21:57 PM PST US From: John & Paddy Wigney Subject: Europa-List: John Hurst at Sebring Dear Europaphiles, Some of you may remember John Hurst who ran the Florida sales office for Europa in the days before the bankruptcy problems. If you go to the current AVweb issue at http://www.avweb.com/eletter/archives/avflash/1037-full.html#196989 and scroll down to "Flight Design Introduces CTLS" you will see him doing a brief You Tube presentation for the Flight Design CTLS. Cheers, John DO NOT ARCHIVE ________________________________ Message 2 _____________________________________ Time: 04:06:50 PM PST US From: Keith Hickling Subject: Europa-List: Silencer position in cowl Hello all, The silencer (muffler) on my XS / 912 uls (the new oval section silencer) sits forward of the moulded recess in the cowl. The front of the silencer is touching the cowl on the outboard side, forward of the recess. The straight outlet pipe from the silencer would exit several cm above the moulded recess. The silencer could not move any further back, as it has only a few mm clearance from the bottom attachment of the ring mount. Photo attached. I presume this is a result of having the oval section silencer instead of the round section one. Have others had this problem, and if so what have you done? Keith Hickling, New Zealand. ________________________________ Message 3 _____________________________________ Time: 06:24:46 PM PST US Subject: Re: Europa-List: Silencer position in cowl From: "SteveD" Hi Keith, I had the same problem. I was at Flight Creations, me and Bud looked at it, scratched our collective heads, and tried to make it fit. It didn't. After a couple of minutes of that, took out the old maniac wheel and cut a hole where the silencer hit. A plug of foam, some glass and all was well. Steved Visit - www.EuropaOwners.org Attachments: http://www.europaowners.org//zfiles/outside_105.jpg http://www.europaowners.org//zfiles/inside_106.jpg ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.