---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Mon 02/18/08: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:16 AM - Re: Dynon angle of attack mode (josok) 2. 07:10 AM - Re: Dynon Angle of Attack probe (jimpuglise@comcast.net) 3. 07:18 AM - Re: Dynon Angle of Attack probe (jimpuglise@comcast.net) 4. 08:06 AM - Fuel System (flyingphil2) 5. 11:53 AM - Re: Fuel System - What should I add? (Paul Stewart) 6. 01:49 PM - resin (Paul Stewart) 7. 07:51 PM - Carburetor Synchronization (Martin Tuck) ________________________________ Message 1 _____________________________________ Time: 12:16:39 AM PST US Subject: Re: Europa-List: Dynon angle of attack mode From: "josok" Flying and landing Juliet Oscar i did no feel any need for the AoA system, so i have decided not to install the AoA tube. If i can make somebody happy with the stuff, i't for sale for a very low price. Regards, Jos Okhuijsen Visit - www.EuropaOwners.org ________________________________ Message 2 _____________________________________ Time: 07:10:15 AM PST US From: jimpuglise@comcast.net Subject: Re: Europa-List: Dynon Angle of Attack probe William- I fitted one and am just about to close the wings. If you need photos I have them. I used the Getz base unit mounted in the wing and the probe slides onto the Getz base. Buying both the probe and the Getz base gets a little expensive, but it seems to work just fine. Jim Puglise A-283 -------------- Original message -------------- From: William Harrison > > > Hi > > Does anyone have experience of fitting a Dynon Angle of attack probe > to a Europa, if so what was involved? In particular, the structural > mounting and the arrangements for a static port? > > Does anyone know if the PFA/LAA have approved a mod for the Dynon probe? > > If not Dynon, what is the best bet for AOA measurement? > > Many thanks in advance. > > Willie Harrison - kit 401/G-BZNY > > > >

William-

I fitted one and am just about to close the wings. If you need photos I have them. I used the Getz base unit mounted in the wing and the probe slides onto the Getz base. Buying both the probe and the Getz base gets a little expensive, but it seems to work just fine.

Jim Puglise A-283

gator

________________________________ Message 3 _____________________________________ Time: 07:18:32 AM PST US From: jimpuglise@comcast.net Subject: Re: Europa-List: Dynon Angle of Attack probe William- Sorry, forgot to mention the static port. I plan to use the static port from the Europa ASI for both. I have both the Europa ASI and the Dynon. I will use the Europa for the steam gauge and the Dynon probe for the Dynon.I mounted the Getz base forward of the Europa ASI against the spar. I used an aluminum plate provided by Getz and reinforced it with 2 layers of BID about 8 X 12 inches about and 1/8 inch plywood the size of the plate. Jim Puglise A-283. -------------- Original message -------------- From: William Harrison > > > Hi > > Does anyone have experience of fitting a Dynon Angle of attack probe > to a Europa, if so what was involved? In particular, the structural > mounting and the arrangements for a static port? > > Does anyone know if the PFA/LAA have approved a mod for the Dynon probe? > > If not Dynon, what is the best bet for AOA measurement? > > Many thanks in advance. > > Willie Harrison - kit 401/G-BZNY > > > >

William-

Sorry, forgot to mention the static port. I plan to use the static port from the Europa ASI for both. I have both the Europa ASI and the Dynon. I will use the Europa for the steam gauge and the Dynon probe for the Dynon.I mounted the Getz base forward of the Europa ASI against the spar. I used an aluminum plate provided by Getz and reinforced it with 2 layers of BID about 8 X 12 inches about and 1/8 inch plywood the size of the plate.

Jim Puglise A-283.

gator

________________________________ Message 4 _____________________________________ Time: 08:06:30 AM PST US Subject: Europa-List: Fuel System From: "flyingphil2" Hi, Just to say thanks for all your comments. I have a better idea of where I'm going with this now. Regards, Phil Visit - www.EuropaOwners.org ________________________________ Message 5 _____________________________________ Time: 11:53:10 AM PST US From: Paul Stewart Subject: Re: Europa-List: Fuel System - What should I add? A few thoughts. The PFA will accept alternatives to the sight guage - they require two independent methods of determining fuel quantity. They have accepted our system based on the avalec capacitance gauge (what ever you think of it) as one and the other is the ability to dip the tank (as per 150's etc) via a 1/2"BSP hole in the Avalec mounting plate. They made no comment about loosing the sight gauge. Grahams tank fittings were developed from ours and again the PFA (sorry LAA) are happy with our system. It is also aluminum fuel line with SS braided teflon hose connecting to the engine itself. There are some pics in the forum gallery. I have the PFA application somewhere if anyone in the UK needs the reference to help with their own applications to LAA. Regards Paul ________________________________ Message 6 _____________________________________ Time: 01:49:21 PM PST US From: Paul Stewart Subject: Europa-List: resin Is there anyone within striking distance of central UK (Derby to be specific) who would be willing to sell enough resin for us to do the tail plane mod? Regards Paul G-GIDY ________________________________ Message 7 _____________________________________ Time: 07:51:25 PM PST US From: Martin Tuck Subject: Europa-List: Carburetor Synchronization Hi Folks, I watched with interest the Rotax-owner.com video on carburetor synchronization. Anyone know where one can get the single dial (dual pointer) sync tool shown on the video. Lockwood only seem to sell the dual dial version. Any other tools out there one can use? Regards, Martin Tuck Europa N152MT Wichita, Kansas ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.