---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Wed 02/20/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 12:22 AM - Re: Re: HELP! (Carl Pattinson) 2. 02:08 PM - Fw: Lipps prop for Europa (karelvranken) 3. 05:05 PM - Re: Monowheel Capture (Tom Friedland) 4. 06:54 PM - Re: Monowheel Capture (europaman) ________________________________ Message 1 _____________________________________ Time: 12:22:00 AM PST US From: "Carl Pattinson" Subject: Re: Europa-List: Re: HELP! Hi, Whereabouts in England is your aircraft? We are about to start on the mods (mod 52, 73 & 74) if you are interested in a demonstration - we built the A/C originally. Could assist in yours if you are close enough. Note if you didnt do the weight increase mod originally (Mod52) it is highly reccommended you incorporate it now as most of the work in Mod 74 is part of the original weight increase mod. We are located in Bicester (near Oxford). Let me know. If you drop me an email at carl@flyers.freeserve.co.uk I will let you have our details. Regards Carl Pattinson ----- Original Message ----- From: "SteveD" Sent: Tuesday, February 19, 2008 1:52 PM Subject: Europa-List: Re: HELP! > > Anyone out there fancy doing the wing/tail mods? or showing a composite > newbie how to?(prepared to pay) > Choperpaul > > pilot.whittingham@googlemail.com > Flying Classic > England > > ( I'm reposting to make sure this gets out on the List-server. please > respond to Choperpaul above.) > > > Visit - www.EuropaOwners.org > > > ________________________________ Message 2 _____________________________________ Time: 02:08:09 PM PST US From: "karelvranken" Subject: Fw: Europa-List: Lipps prop for Europa Hello everybody, Nearly a year ago I looked with some interest to the promising articles about propeller optimisation. Is there a breakthrough or was it a dream? Airmaster meanwhile should have worked on a Sensenich two-bladed propeller for Oshkosh. Is there someone knowing more about progress in that matter? Karel Vranken. # 447 F-PKRL ----- Original Message ----- From: glenn crowder Sent: Wednesday, May 30, 2007 8:14 PM Subject: Europa-List: Lipps prop for Europa On Monday, May 28, 2007, at 06:56 AM, Mike Gregory wrote: Has anyone tried an Elippse propeller on a Europa? See article www.batterson.net/EAA499/Issue77_8-13.pdf which makes some interesting points about propeller design. The referenced article is worth a read if you're interested in this topic. Pictures of an Ellipse prop on a Lancair are astonishing...at least they were to me. Intrigued, I emailed Paul Lipps, excerpt as follows: To: elippse@sbcglobal.net Subject: a prop for the Europa ________________________________ Message 3 _____________________________________ Time: 05:05:29 PM PST US From: "Tom Friedland" <96victor@gmail.com> Subject: Re: Europa-List: Monowheel Capture Hi Troy I also have a larger tire and had the same problem. I added a piece of steel to extend the hinge of the ramp aft so then the existing ramp would hold the arms. Fairly easy to do. I can take photos if you need. Tom On Tue, Feb 19, 2008 at 7:18 PM, Troy wrote: > > Hi Folks, > Can some of you measure the distance that the sides of the ramp comes up > and > has contact on the sides of the landing gear frame? Also note if you have > the larger diameter tire. I have the Air Trac tire and the one-off steel > trailer that I bought from Europa USA years ago. The sides didn't come up > very far so I had some extra length added to the side tabs to better > capture > the gear frame. Now the brake caliper is hitting when I roll the plane > onto > the ramp. So I'll have to cut some off again. It never ends....... > > Troy Maynor > > ________________________________ Message 4 _____________________________________ Time: 06:54:59 PM PST US Subject: Re: Europa-List: Monowheel Capture From: "europaman" Tom, Yes, a picture or two here would be great. Maybe of the hinge area and the LG frame contact area if your plane is on the trailer now. Thanks. Troy Visit - www.EuropaOwners.org ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.