Europa-List Digest Archive

Wed 08/20/08


Total Messages Posted: 7



Today's Message Index:
----------------------
 
     1. 07:19 AM - Re: Europa aerial (rampil)
     2. 07:50 AM - Singleton and Leveringhaus (Fergus Kyle)
     3. 08:13 AM - Re: Singleton and Leveringhaus (Brian Davies)
     4. 11:35 AM - Re: A very lucky escape from power lines (Duncan & Ami McFadyean)
     5. 02:06 PM - here we go again/off topic (Fergus Kyle)
     6. 02:33 PM - Re: here we go again/off topic (Pete Lawless)
     7. 05:40 PM - Pete and 'here we go....' (Fergus Kyle)
 
 
 


Message 1


  • INDEX
  • Back to Main INDEX
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:19:19 AM PST US
    Subject: Re: Europa aerial
    From: "rampil" <ira.rampil@gmail.com>
    To be complete, ordinary paint will have next to no effect on antenna performance with the major exception being UV barrier, metal containing primer. These coating will significantly shield the antenna and reduce effective radiation. -------- Ira N224XS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=199628#199628


    Message 2


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 07:50:17 AM PST US
    From: "Fergus Kyle" <VE3LVO@rac.ca>
    Subject: Singleton and Leveringhaus
    Graham, The owner and pilot of this Classic Europa is Reinhard Leveringhaus. > He bought the plane from Joachim Hohenstein last year. > I guess they didn't want him at the moment so his life will hopefully > now last very long. > > Bruno >Hi Bruno >guess he wasn't good enough to go to heaven and not bad enough for >the other place ;-) , like me! >Graham On the other hand, he might get to Heaven quicker if he were to update his ownership with the club just to keep voluntary records accurate. Lord knows few enough of us are doing this. Cheers, Ferg


    Message 3


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 08:13:53 AM PST US
    From: "Brian Davies" <bdavies@dircon.co.uk>
    Subject: Singleton and Leveringhaus
    I agee! But neither of them are members of the Club. Bruno, if you have an up todate list of owners in your area I will update the records. You can use my memsec@europaclub.org.uk e mail address. Brian Davies, Europa Club membership sec. > _____________________________________________ > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Fergus Kyle > Sent: 20 August 2008 15:50 > To: EUROPALIST > Subject: Europa-List: Singleton and Leveringhaus > > Graham, > The owner and pilot of this Classic Europa is Reinhard Leveringhaus. > > He bought the plane from Joachim Hohenstein last year. > > I guess they didn't want him at the moment so his life will hopefully > > now last very long. > > > > Bruno > >Hi Bruno > >guess he wasn't good enough to go to heaven and not bad enough for > >the other place ;-) , like me! > >Graham > > On the other hand, he might get to Heaven quicker if he were to > update > his ownership with the club just to keep voluntary records accurate. Lord > knows > few enough of us are doing this. > Cheers, Ferg > > >


    Message 4


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 11:35:22 AM PST US
    From: "Duncan & Ami McFadyean" <ami@mcfadyean.freeserve.co.uk>
    Subject: Re: A very lucky escape from power lines
    Also made the Gulf Times, with photo! Duncan Mcf do not archive ----- Original Message ----- From: "Greg Fuchs " <gregoryf.flyboy@comcast.net> Sent: Tuesday, August 19, 2008 1:27 AM Subject: RE: Europa-List: A very lucky escape from power lines > <gregoryf.flyboy@comcast.net> > > > Some more links: > > http://www.mailonsunday.co.uk/news/article-1046392/Pictured-Pilots-miracle-e > scape-tangle-high-voltage-power-lines.html > > > http://www.watoday.com.au/world/plane-clips-power-lines-hangs-upside-down-fo > r-three-hours-20080819-3xrl.html > > according to the video here, the plane still hangs there: > http://itn.co.uk/news/f722776cf590fcf81726261ecd33712c.html > > http://timesnow.tv/Newsdtls.aspx?NewsID=13894 > > > -----Original Message----- > From: owner-europa-list-server@matronics.com > [mailto:owner-europa-list-server@matronics.com] On Behalf Of Greg Fuchs > Sent: Monday, August 18, 2008 4:57 PM > To: europa-list@matronics.com > Subject: RE: Europa-List: A very lucky escape from power lines > > <gregoryf.flyboy@comcast.net> > > > Well done! Lucky the plane hung on, and that it wasn't gusty. After > rescuing > the pilot/passenger, I wonder how they got the plane down. Hopefully it > was > done nicely, and will fly soon (by recovered pilot himself). > > > Do not archive > > >


    Message 5


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:06:43 PM PST US
    From: "Fergus Kyle" <VE3LVO@rac.ca>
    Subject: here we go again/off topic
    Hello, Again, I beg your indulgence to cure my lack of knowledge. Once more, a simple task turns into a wasted half-hour or more: As the build expands, I want to review the Mandatory Mods to complete before the finish. One of these is the Mod #74, which Europa provides as a series of 18 pages to be printed (I guess as A4 or whatever, while my paper is 8.5x11 inches). Well up to now, it's been simple in that the programme revises itself to satisfy the different size pages, and just prints it. This time however, when I go to print, I get an asinine page which says "Europa Aircraft The document in this frame cannot be printed as laid out. This frame will be printed separately" Has some company gnome slid this embargo in under the aegis of "your updates are screaming to get into your computer" or words to that effect, or have I once again tapped a secret key by mistake and entered another dimension? I presume this hiccough is easily cured by understanding the lexicon the author has adopted - by I don't. I don't want a frame, I don't see any frame on the original pages and perhaps he meant grame, drame or brame? If you use Microsoft Word and a standard NA printer, perhaps you might rescue me from the rubber room I'm contemplating. It's like watching your mother-in-law drive off the cliff in your new Mercedes - I imagine. Help, Ferg


    Message 6


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 02:33:31 PM PST US
    From: "Pete Lawless" <pete@lawless.info>
    Subject: here we go again/off topic
    Hi Ferg Try this attached .pdf of mod 74. It prints ok for me. Page size should not cause an error message just give rubbish pagination. Regards Pete -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Fergus Kyle Sent: 20 August 2008 22:06 Subject: Europa-List: here we go again/off topic Hello, Again, I beg your indulgence to cure my lack of knowledge. Once more, a simple task turns into a wasted half-hour or more: As the build expands, I want to review the Mandatory Mods to complete before the finish. One of these is the Mod #74, which Europa provides as a series of 18 pages to be printed (I guess as A4 or whatever, while my paper is 8.5x11 inches). Well up to now, it's been simple in that the programme revises itself to satisfy the different size pages, and just prints it. This time however, when I go to print, I get an asinine page which says "Europa Aircraft The document in this frame cannot be printed as laid out. This frame will be printed separately" Has some company gnome slid this embargo in under the aegis of "your updates are screaming to get into your computer" or words to that effect, or have I once again tapped a secret key by mistake and entered another dimension? I presume this hiccough is easily cured by understanding the lexicon the author has adopted - by I don't. I don't want a frame, I don't see any frame on the original pages and perhaps he meant grame, drame or brame? If you use Microsoft Word and a standard NA printer, perhaps you might rescue me from the rubber room I'm contemplating. It's like watching your mother-in-law drive off the cliff in your new Mercedes - I imagine. Help, Ferg -- This message has been scanned for viruses and dangerous content by Houxou, and is believed to be clean.


    Message 7


  • INDEX
  • Back to Main INDEX
  • PREVIOUS
  • Skip to PREVIOUS Message
  • NEXT
  • Skip to NEXT Message
  • LIST
  • Reply to LIST Regarding this Message
  • SENDER
  • Reply to SENDER Regarding this Message
    Time: 05:40:43 PM PST US
    From: "Fergus Kyle" <VE3LVO@rac.ca>
    Subject: Pete and 'here we go....'
    Pete, Many thanks, because it worked out fine for me. Funny because I had just printed out another mod without a hassle, and that 'frame' event arrived and put the kibosh to the plan. Frustration relieved! Much obliged, Ferg




    Other Matronics Email List Services

  • Post A New Message
  •   europa-list@matronics.com
  • UN/SUBSCRIBE
  •   http://www.matronics.com/subscription
  • List FAQ
  •   http://www.matronics.com/FAQ/Europa-List.htm
  • Web Forum Interface To Lists
  •   http://forums.matronics.com
  • Matronics List Wiki
  •   http://wiki.matronics.com
  • 7-Day List Browse
  •   http://www.matronics.com/browse/europa-list
  • Browse Europa-List Digests
  •   http://www.matronics.com/digest/europa-list
  • Browse Other Lists
  •   http://www.matronics.com/browse
  • Live Online Chat!
  •   http://www.matronics.com/chat
  • Archive Downloading
  •   http://www.matronics.com/archives
  • Photo Share
  •   http://www.matronics.com/photoshare
  • Other Email Lists
  •   http://www.matronics.com/emaillists
  • Contributions
  •   http://www.matronics.com/contribution

    These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.

    -- Please support this service by making your Contribution today! --