---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Wed 08/27/08: 4 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 10:08 AM - EGT Probes (Troy Maynor) 2. 11:25 AM - Re: EGT Probes (rampil) 3. 02:32 PM - Magneto/Ign. mod. Failure (steve v) 4. 02:48 PM - Re: Magneto/Ign. mod. Failure (Terry Seaver (terrys)) ________________________________ Message 1 _____________________________________ Time: 10:08:47 AM PST US From: Troy Maynor Subject: Europa-List: EGT Probes The Rotax manual specifies 2.75" from the flange to the mount point of the EGT probes. Is it a coincidence this centers right on the thick band part of the pipes where they are welded together or are these thicker parts for drilling and tapping? I have the kind that mount with clamps. Troy Maynor ________________________________ Message 2 _____________________________________ Time: 11:25:01 AM PST US Subject: Europa-List: Re: EGT Probes From: "rampil" Troy, My old and new exhausts both have uniform diameter and thickness from the block flange to the ball joint. The only care was in siting the weld-on bung so that the probe, sticking out 4 inches or so do not obstruct access to the flange nuts or fitting the cowl back on. In my new exhaust system, I have EGTs on all 4 cylinders. -------- Ira N224XS Read this topic online here: http://forums.matronics.com/viewtopic.php?p 0959#200959 ________________________________ Message 3 _____________________________________ Time: 02:32:44 PM PST US Subject: Europa-List: Magneto/Ign. mod. Failure From: "steve v " hi, a freind of mine with a new 912S on its first hour of flight has had a magneto / ignition module failure, it is the lower of the two labeled module "B", i have lent him mine so that he can complete the test flying of the zenair, as the motor is about 2 years old, rotax will not honor the warranty, anyone come across this and is it common? i will be taking a hacksaw and avo to the module should he not get anywhere with Rotax, steve #573 Visit - www.EuropaOwners.org ________________________________ Message 4 _____________________________________ Time: 02:48:42 PM PST US Subject: RE: Europa-List: Magneto/Ign. mod. Failure From: "Terry Seaver (terrys)" Hi Steve, Before hacking up a module just make sure you don't have intermittent wires to the module. On both our plane (912S) and another 912S that we know of there were wires broken at the connectors but held in contact by the insulation (most of the time). We could not find the break with a volt meter, but just ran the engine with the cowl off and had someone wiggle/pull on the wires one at a time to see if it effected the engine operation (please stay clear of the prop). Just a thought, Terry Seaver A135/N135TD -----Original Message----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of steve v Sent: Wednesday, August 27, 2008 2:29 PM Subject: Europa-List: Magneto/Ign. mod. Failure --> hi, a freind of mine with a new 912S on its first hour of flight has had a magneto / ignition module failure, it is the lower of the two labeled module "B", i have lent him mine so that he can complete the test flying of the zenair, as the motor is about 2 years old, rotax will not honor the warranty, anyone come across this and is it common? i will be taking a hacksaw and avo to the module should he not get anywhere with Rotax, steve #573 Visit - www.EuropaOwners.org ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.