---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Sun 11/30/08: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 0. 12:10 AM - Last "Official" Day Of The List Fund Raiser! (Matt Dralle) 1. 03:40 AM - Re: rudder cable pulley mounting (Kingsley Hurst) 2. 05:52 AM - Re: rudder cable pulley mounting (rlborger) 3. 04:47 PM - Mod 72 (jimpuglise@comcast.net) 4. 05:02 PM - Re: Mod 72 (Roger Lowe) 5. 05:24 PM - Re: Mod 72 (Paul Boulet) 6. 06:18 PM - Re: Mod 72 (jimpuglise@comcast.net) ________________________________ Message 0 _____________________________________ Time: 12:10:00 AM PST US From: Matt Dralle Subject: Europa-List: Last "Official" Day Of The List Fund Raiser! Dear Listers, Its November 30th and that means three things:.. 1) Today I am now officially 45 years old... 2) It marks that last "official" day of this year's List Fund Raiser! 3) Its the last day I will be bugging everyone for a whole year! If you use the Lists and enjoy the content and the no-advertising, no-spam, and no-censorship way in which they're run, please make a Contribution today to support their continued operation and upkeep. Your $20 or $30 goes a long way to keep the List bills paid. I will be posting the List of Contributors next week so make sure your name is on it! Thank you to everyone that has made a Contribution so far this year! It is greatly appreciated. http://www.matronics.com/contribution Best regards, Matt Dralle Email List and Forum Administrator ________________________________ Message 1 _____________________________________ Time: 03:40:37 AM PST US From: "Kingsley Hurst" Subject: Re: Europa-List: rudder cable pulley mounting > I've just drilled the holes for the rudder pulley and the inboard harness > attachment, and am a bit surprised to find that when the pulley is > mounted, it doesn't look anything like the drawing in the manual. Rowland, We had exactly the same problem and rather than use several of the heavy large area washers, we made up spacers out of aluminium. They were turned in a lathe in the shape of a squat cotton reel the same diameter as the washers. Lighter than the washers and easier to assemble too. Hope this helps Kingsley in Oz ________________________________ Message 2 _____________________________________ Time: 05:52:17 AM PST US From: rlborger Subject: Re: Europa-List: rudder cable pulley mounting Rowland, It may be too late, but you can check my build website (URL in the signature block), Album: Year #6 Q1 2007 for my solution to the problem. The first pic is the last one on page 1 and it runs through the first few pics on page 2. And if this isn't your problem, just ignore this. Check six, Bob Borger Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S http://www.europaowners.org/N914XL (99.99% done) Checking off the last few items on the final check list. 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117 On Nov 29, 2008, at 11:57 AM, Rowland & Wilma Carson wrote: > > > > I've just drilled the holes for the rudder pulley and the inboard > harness attachment, and am a bit surprised to find that when the > pulley is mounted, it doesn't look anything like the drawing in the > manual. > > The picture shows the pulley well clear of the harness mounting > hole, but I find that it overlaps the bolt head completely. I > thought I'd fallen into another of those "printed manual is wrong, > should have checked the PDF first" traps, but the PDF is the same as > my hard-copy. My pulley does align with the edges of the cockpit > module tunnel in the recommended way - about flush at the aft, and > about 6mm clear of the bottom surface. > > The manual suggests 3 spacing washers (AN960-10) as a starting point > for pulley placement. That does put the pulley clear of the harness- > fixing bolt head, but if one of those were removed it would be > rubbing, so there is not much adjustment of position available. The > smallest washer pack that I think would be OK here is 2 off AN960-10 > + 1 off AN960-10L. > > Any comments on this? Has anyone found the need to reduce the washer > pack much to get good rudder cable alignment? > > regards > > Rowland > -- ________________________________ Message 3 _____________________________________ Time: 04:47:45 PM PST US From: jimpuglise@comcast.net Subject: Europa-List: Mod 72 I have completed Mod. 72 and find that I have two reamers that I no longer need.=C2- If anyone needs them, the first two mailing address I receive w ill get them.=C2- All I ask in return is that you send me a check for the postage cost.=C2- Jim Puglise A-283 ________________________________ Message 4 _____________________________________ Time: 05:02:51 PM PST US From: "Roger Lowe" Subject: RE: Europa-List: Mod 72 Jim, I would like to have one of the reamers. Please send it to the following address. Roger Lowe 4106 -11 Concession Puslinch Township RR#1 MOFFAT, Ontario, CANADA L0P 1J0 I'll send you a US Bank Draft for the postage cost. Thanks in advance, Roger Lowe A252 _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of jimpuglise@comcast.net Sent: Sunday, November 30, 2008 7:46 PM Subject: Europa-List: Mod 72 I have completed Mod. 72 and find that I have two reamers that I no longer need. If anyone needs them, the first two mailing address I receive will get them. All I ask in return is that you send me a check for the postage cost. Jim Puglise A-283 ________________________________ Message 5 _____________________________________ Time: 05:24:25 PM PST US From: Paul Boulet Subject: Re: Europa-List: Mod 72 I'd like to have on Paul Boulet 20512 Little Rock Way Malibu, CA- 90265 --- On Sun, 11/30/08, jimpuglise@comcast.net wrote : From: jimpuglise@comcast.net Subject: Europa-List: Mod 72 #yiv996299226 p {margin:0;} I have completed Mod. 72 and find that I have two reamers that I no longer need.- If anyone needs them, the first two mailing address I receive will get them.- All I ask in return is that you send me a check for the posta ge cost.- - Jim Puglise A-283 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ________________________________ Message 6 _____________________________________ Time: 06:18:57 PM PST US From: jimpuglise@comcast.net Subject: Re: Europa-List: Mod 72 Paul Boulet and Roger Rowe -- I'll=C2- try to get them in the mail this week.=C2- If you haven't done the mod yet, do exactly as in the instructions and it goes very smoothly. =C2- About a 15 minute job. =C2- Jim Puglise ---- Original Message ----- From: "Paul Boulet" Sent: Sunday, November 30, 2008 8:23:49 PM GMT -05:00 US/Canada Eastern Subject: Re: Europa-List: Mod 72 I'd like to have on Paul Boulet 20512 Little Rock Way Malibu, CA=C2- 90265 --- On Sun, 11/30/08, jimpuglise@comcast.net wrote : From: jimpuglise@comcast.net Subject: Europa-List: Mod 72 I have completed Mod. 72 and find that I have two reamers that I no longer need.=C2- If anyone needs them, the first two mailing address I receive w ill get them.=C2- All I ask in return is that you send me a check for the postage cost.=C2- Jim Puglise A-283 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D=3D= 3D ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.