---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Tue 03/10/09: 9 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 01:10 AM - Re: Europa-List Digest: 24 Msgs - 03/09/09 (D Wysong) 2. 03:13 AM - Re: software (David Joyce) 3. 03:22 AM - Re: software (G-IANI) 4. 04:51 AM - Re: Flap position, Flight testing (Kingsley Hurst) 5. 05:02 AM - Re: Re: Europa-List Digest: 24 Msgs - 03/09/09 (Robert Borger) 6. 06:53 AM - Re: Flap position, Flight testing (ALAN YERLY) 7. 09:21 AM - EuropaOwners is Moving (SteveD) 8. 09:50 AM - Reply soon (Karel Vranken) 9. 11:16 AM - Re: software (Paul Stewart) ________________________________ Message 1 _____________________________________ Time: 01:10:03 AM PST US Subject: Europa-List: Re: Europa-List Digest: 24 Msgs - 03/09/09 From: D Wysong > It is my belief that the turbo flange will be too hot (especially after > shut down) for silicone hoses. Silicone is OK for water cooling system > only? However I suggest you check this out don't rely on my authority. Howdy Bob, Perhaps these silicone hoses are a different animal. Per the FAQ (www.turbohoses.com), these are good to over 1000 F in one hour increments and 600 F continuously per their FAQ. Our extended 914 ground runs haven't revealed any heat issues thus far but we'll certainly keep an eye on things. :-) D ________________________________ Message 2 _____________________________________ Time: 03:13:54 AM PST US From: "David Joyce" Subject: Re: Europa-List: software Paul, You can download the 3 different versions (each for a different range of engine nos) from the Rotax website. Regards, David Joyce, G-XSDJ ----- Original Message ----- From: "Paul Stewart" Sent: Monday, March 09, 2009 7:00 PM Subject: Europa-List: software > > Anyone know where I can get a copy of the throttle setting software for > the 914? > > Paul > G-GIDY > > > ________________________________ Message 3 _____________________________________ Time: 03:22:01 AM PST US From: "G-IANI" Subject: RE: Europa-List: software Both the Factory and the Europa Club have available copies of the 914 throttle setting software. The software is small and I can e-mail it to you. There are three versions and, depending on age of engine, you may need a "dongle". The Factory has a "dongle" but the club does not. You may also need to make up a suitable cable for connection to a PC. You can contact me (on 01483 714096) if you wish to discuss further. Ian Rickard G-IANI XS Trigear, 250 hours Europa Club Mods Rep (Trigear) e-mail mods@europaclub.org.uk or direct g-iani@ntlworld.com ________________________________ Message 4 _____________________________________ Time: 04:51:47 AM PST US From: "Kingsley Hurst" Subject: Re: Europa-List: Flap position, Flight testing Alan, Thank you for your write-up on flight testing and trimming. Mostly understood but in one place you said "Right flap down rolls right." . . . . did you mean to say this ?? Cheers Kingsley in Oz. ________________________________ Message 5 _____________________________________ Time: 05:02:23 AM PST US From: Robert Borger Subject: Re: Europa-List: Re: Europa-List Digest: 24 Msgs - 03/09/09 Bob & D, I have silicone hose (different vendor) on the compressor out side of my my intercooled 914. A total of 4 hours running. Half on the ground and half actual flight time. No issues so far. Check six, Bob Borger Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S http://www.europaowners.org/N914XL Aircraft Flying! 3705 Lynchburg Dr. Corinth, TX 76208 Home: 940-497-2123 Cel: 817-992-1117 On Mar 10, 2009, at 3:01, D Wysong wrote: > >> It is my belief that the turbo flange will be too hot (especially >> after >> shut down) for silicone hoses. Silicone is OK for water cooling >> system >> only? However I suggest you check this out don't rely on my >> authority. > > Howdy Bob, > > Perhaps these silicone hoses are a different animal. Per the FAQ > (www.turbohoses.com), these are good to over 1000 F in one hour > increments and 600 F continuously per their FAQ. Our extended 914 > ground runs haven't revealed any heat issues thus far but we'll > certainly keep an eye on things. :-) > > D > > ________________________________ Message 6 _____________________________________ Time: 06:53:05 AM PST US From: "ALAN YERLY" Subject: Re: Europa-List: Flap position, Flight testing Many thanks, My brevity of my checklist is not always clear. I mean that to cure a tendency of the aircraft to roll to the right, you correct with a droop of the right flap when trimming. Thanks for putting up with my hurried post. Bud Yerly Custom Flight Creations ----- Original Message ----- From: Kingsley Hurst To: europa-list@matronics.com Sent: Tuesday, March 10, 2009 7:45 AM Subject: Re: Europa-List: Flap position, Flight testing Alan, Thank you for your write-up on flight testing and trimming. Mostly understood but in one place you said "Right flap down rolls right." . . . . did you mean to say this ?? Cheers Kingsley in Oz. http://www.matronics.com/Navigator?Europa-List http://www.matronics.com/contribution ________________________________ Message 7 _____________________________________ Time: 09:21:35 AM PST US Subject: Europa-List: EuropaOwners is Moving From: "SteveD" Hello all, EuropaOwners is moving in both the real and virtual worlds. Over the next month the location of the servers that EuropaOwners lives on are moving to a new location. Then once the servers are physically moved the servers themselves will be upgraded. So, in a perfect world you would never know the difference. In the real world you may see blips in service durning the next month or so. Please let me know of any loss of service, but don't worry we will be back... Thanks, Steved Visit - www.EuropaOwners.org ________________________________ Message 8 _____________________________________ Time: 09:50:35 AM PST US Subject: Europa-List: Reply soon From: Karel Vranken To all, Since more than ten years I was a user of Hotmail. Not only the spam invaded my PC but also my account was shut down. So meanwhile you are thinking that I am laying under a palm tree in Lagos as a certain Fowler. But I was unable to repair the communication with my ancient server. Here is my new adress: karelvranken9@gmail.com and back on the list again. Best regards, Karel Vranken. ________________________________ Message 9 _____________________________________ Time: 11:16:24 AM PST US From: Paul Stewart Subject: Re: Europa-List: software Thanks to all who have helped out with the software. Paul G-GIDY ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.