Today's Message Index:
----------------------
1. 10:08 PM - Re: Re: Monowheel master cylinder (Greg Fuchs)
2. 10:53 PM - Landing gear frame (Greg Fuchs)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | RE: Monowheel master cylinder |
Just trying to have fun:
I guess this would approximate the tri-Gear version. Darwinism may take
awhile to catch up for its usage.
Note: Its only been a few months since April 1st.
Do Not Archive
_____
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Mike Parkin
Sent: Tuesday, June 23, 2009 11:09 AM
Subject: Europa-List: RE: Monowheel master cylinder
John,
Please see the attached photos. Hope they help.
Regards,
Mike
From: John & Paddy Wigney [mailto:johnwigney@windstream.net]
Sent: 21 June 2009 02:24
Subject: Monowheel master cylinder
Hi Mike,
As a follow up to your suggestion re the MDO Aircraft master cylinder, am I
correct that you have installed one of these? If so, I would be most
grateful if you have any installation recommendations and photos. Also any
comments re shipping from France? I had intended to ask Mr. Bastien for
estimated shipping cost to the US via Fedex or UPS.
Cheers, John
Checked by AVG - www.avg.com
06/20/09 06:15:00
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Landing gear frame |
Europa Listers,
I have found some corrosion and rust in a few areas of my landing gear
frame, so I will have to deal with that.
My first consideration is powder coating. It would be nice to powder coat
over the gold-colored corrosion protection that is there, but based on
previous listings, I may need to get down to bare metal to get it to stick.
If I simply scuff-sanded the frame, will anything stick to it? If anyone has
painted or powder-coated over the original corrosion protection, and had
results (negative or positive), let me know.
Thanks in advance,
Greg Fuchs
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|