---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Fri 08/07/09: 7 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 02:05 AM - Sherburn Sat or Sun (Paddy Clarke) 2. 09:22 AM - Re: Sherburn Sat or Sun (Mike Gregory) 3. 10:12 AM - Re: Sherburn Sat or Sun (Bob Hitchcock) 4. 02:22 PM - () 5. 05:27 PM - Tailplane Pitch tubes: EUR002 Bolts not seating (Greg Fuchs) 6. 07:25 PM - Calling Glenn Crowder ! (Fred Klein) 7. 07:27 PM - Re: Tailplane Pitch tubes: EUR002 Bolts not seating (Fred Klein) ________________________________ Message 1 _____________________________________ Time: 02:05:35 AM PST US From: Paddy Clarke Subject: Europa-List: Sherburn Sat or Sun Hi Folks, Is anyone thinking of going to Sherburn for the LAA fly-in tomorrow or Sunday? All the best, Paddy Paddy Clarke Europa G-KIMM ________________________________ Message 2 _____________________________________ Time: 09:22:36 AM PST US From: "Mike Gregory" Subject: RE: Europa-List: Sherburn Sat or Sun Yes, planning for Sunday. Hoping for a better turn-out than Shobdon - I trust your strip's dried out? Best wishes, Mike _____ From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Paddy Clarke Sent: 07 August 2009 10:02 Subject: Europa-List: Sherburn Sat or Sun Hi Folks, Is anyone thinking of going to Sherburn for the LAA fly-in tomorrow or Sunday? All the best, Paddy Paddy Clarke Europa G-KIMM ________________________________ Message 3 _____________________________________ Time: 10:12:17 AM PST US From: "Bob Hitchcock" Subject: Re: Europa-List: Sherburn Sat or Sun Hi Mike, Hi Paddy See you there on Sunday Regards Bob ----- Original Message ----- From: Mike Gregory To: europa-list@matronics.com Sent: Friday, August 07, 2009 5:19 PM Subject: RE: Europa-List: Sherburn Sat or Sun Yes, planning for Sunday. Hoping for a better turn-out than Shobdon - I trust your strip's dried out? Best wishes, Mike ------------------------------------------------------------------------- ----- From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of Paddy Clarke Sent: 07 August 2009 10:02 To: europa-list@matronics.com Subject: Europa-List: Sherburn Sat or Sun Hi Folks, Is anyone thinking of going to Sherburn for the LAA fly-in tomorrow or Sunday? All the best, Paddy Paddy Clarke Europa G-KIMM ________________________________ Message 4 _____________________________________ Time: 02:22:01 PM PST US ________________________________ Message 5 _____________________________________ Time: 05:27:09 PM PST US From: "Greg Fuchs " Subject: Europa-List: Tailplane Pitch tubes: EUR002 Bolts not seating The EUR002 Bolts are to be cut to a length of 1.5" measured from under the head, and then installed into the CS17A end fittings on either side of the main pitch push-rod. They are to be threaded in from the cupped side, after fitting Loctite. The problem I am having is that they don't seat onto the flat surface of the cupped side. The threads bottom out just before the head seats, leaving a gap of about 1.7mm, or about 1/16 (inch). Has anyone had this happen, or has everyone had this happen? ________________________________ Message 6 _____________________________________ Time: 07:25:09 PM PST US From: Fred Klein Subject: Europa-List: Calling Glenn Crowder ! Glennster, even simple emails to such as: Subject: test Yo Glenn...let's see if a mere greeting gets thru...Fred are not making it thru; I'm getting mail daemon messages like this: ----- The following addresses had permanent fatal errors ----- (reason: 550 SC-001 Mail rejected by Windows Live Hotmail for policy reasons. Reasons for rejection may be re...l/network admins, please visithttp://postmaster.live.com for email delivery information and support) and, Final-Recipient: RFC822; gcrowder2@hotmail.com Action: failed Status: 5.0.0 Diagnostic-Code: SMTP; 550 SC-001 Mail rejected by Windows Live Hotmail for policy reasons. Reasons for rejection may be related to content with spam-like characteristics or IP/domain reputation problems. If you are not an email/network admin please contact your E- mail/Internet Service Provider for help. Email/network admins, please visit http://postmaster.live.com for email delivery information and support Last-Attempt-Date: Fri, 7 Aug 2009 16:13:56 -0700 Are you getting other emails? Fred do not archive ________________________________ Message 7 _____________________________________ Time: 07:27:07 PM PST US From: Fred Klein Subject: Re: Europa-List: Tailplane Pitch tubes: EUR002 Bolts not seating > > The problem I am having is that they don't seat onto the flat > surface of the > cupped side. The threads bottom out just before the head seats, > leaving a > gap of about 1.7mm, or about 1/16 (inch). > > Has anyone had this happen, or has everyone had this happen? Greg...I do not recall such a problem...Fred ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.