Today's Message Index:
----------------------
1. 09:48 AM - Stainless Steel Tubing (flyingphil2)
2. 10:00 AM - Re: A/c radios (rampil)
3. 11:22 AM - Re: Stainless Steel Tubing (Bob Borger)
4. 12:29 PM - Re: Stainless Steel Tubing (Karl Heindl)
5. 12:39 PM - fire retardant resins (Fred Klein)
6. 01:09 PM - Re: A/c radios (Mike Parkin)
7. 01:21 PM - Re: Stainless Steel Tubing (rlborger)
8. 05:16 PM - Re: fire retardant resins (Greg Fuchs)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Stainless Steel Tubing |
Hi,
I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa
Club procedure. To do this I need some stainless steel tube with 0.375" outside
diameter, 0.3125" inside diameter (a sliding fit for an AN5 bolt).
I seem to have drawn a blank in finding any of this over in the UK. I only need
about 6" of it. Does anyone who has done this mod have any of this tube lying
around spare? If you do, can you drop me a line please?
Regards,
Phil
Visit - www.EuropaOwners.org
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
I voted for the SL-30 myself, and after 5 years am still convinced
it was the best choice. Modern digital design, standby channel as you ask for,
big memory area for your favorite freqs, auto Morse identifier translation,
support by Garmin, etc.
--------
Ira N224XS
Read this topic online here:
http://forums.matronics.com/viewtopic.php?p=266956#266956
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stainless Steel Tubing |
Phil,
Good Old McMaster-Carr has it.
Part Number 1991T11
Type 440C SS Precision
Shim Bushing Stock 3/8"
OD, 5/16" ID, 6" Length
In stock at $90.11 Each
Yup, that's $90.11 for your 6 inch length
or about 56.62 GBP.
If you can't find it over on your side of the pond or anyplace else for less, I'll
be glad to order it and ship it on to you .
Check six,
Bob Borger
On Wednesday, October 07, 2009, at 11:54AM, "flyingphil2" <ptiller@lolacars.com>
wrote:
>
>Hi,
>
>I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa
Club procedure. To do this I need some stainless steel tube with 0.375" outside
diameter, 0.3125" inside diameter (a sliding fit for an AN5 bolt).
>
>I seem to have drawn a blank in finding any of this over in the UK. I only need
about 6" of it. Does anyone who has done this mod have any of this tube lying
around spare? If you do, can you drop me a line please?
>
>Regards,
>
>Phil
>
>
>Visit - www.EuropaOwners.org
>
>
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Stainless Steel Tubing |
Bob=2C
you have to remember that mcmastercarr don't supply anyone outside of the U
S. I didn't check=2C but ACS may have it=2C too
Karl
> Date: Wed=2C 7 Oct 2009 13:21:29 -0500
> From: rlborger@mac.com
> To: europa-list@matronics.com
> Subject: Re: Europa-List: Stainless Steel Tubing
>
>
> Phil=2C
>
> Good Old McMaster-Carr has it.
>
> Part Number 1991T11
> Type 440C SS Precision
> Shim Bushing Stock 3/8"
> OD=2C 5/16" ID=2C 6" Length
> In stock at $90.11 Each
>
> Yup=2C that's $90.11 for your 6 inch length
> or about 56.62 GBP.
>
> If you can't find it over on your side of the pond or anyplace else for l
ess=2C I'll be glad to order it and ship it on to you .
>
> Check six=2C
> Bob Borger
>
> On Wednesday=2C October 07=2C 2009=2C at 11:54AM=2C "flyingphil2" <ptille
r@lolacars.com> wrote:
> >
> >Hi=2C
> >
> >I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the
Europa Club procedure. To do this I need some stainless steel tube with 0.
375" outside diameter=2C 0.3125" inside diameter (a sliding fit for an AN5
bolt).
> >
> >I seem to have drawn a blank in finding any of this over in the UK. I on
ly need about 6" of it. Does anyone who has done this mod have any of this
tube lying around spare? If you do=2C can you drop me a line please?
> >
> >Regards=2C
> >
> >Phil
> >
> >
> >
> >
> >
> >
> >Visit - www.EuropaOwners.org
> >
> >
> >
> >
> >
> >
> >
> >
> >
> >
>
===========
===========
===========
===========
>
>
>
Message 5
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | fire retardant resins |
After spending several days looking and contacting, finding that such
resins were only available in 55 gal drums, I have found HTR-250-FR, a
2 part fire retardant epoxy resin w/ a distortion temp. of 375 degrees
F. which is sold in 1 gallon kits priced at about $90 and available
thru: www.resinservices.com
In addition, it passes the FAR 25-853 flammability test.
Cheers,
Fred
A194, mono, about to get a nose job
Message 6
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Mike,
The Garmin SL30 is fairly small as radios go. I second David Joyce's
comments in 'spades'. The SL30 radio is brilliant in all respects.
Regards,
Mike
Do not archive
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of mike gamble
Sent: 06 October 2009 15:11
Subject: Europa-List: A/c radios
I need a radio (small footprint) for my mono. I want a built in vox intercom
and a 2nd frequency monitor facility would also be good. I have been
considering the XCOM760 (which is unfortunately not authorised for use in
UK) the microair760, the Funkwerk ATR500 and the
Message 7
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Stainless Steel Tubing |
Karl,
Yes, I know about the overseas shipment problem. That is why I offered to purchase
the tubing and send it on to him.
I have a standing offer to all outside the U.S. to purchase and forward on any
goods they can not purchase and have sent directly.
Best regards,
Bob
Visit - www.EuropaOwners.org
Message 8
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | fire retardant resins |
Thanks Fred, I am adding that to my favorites list. That seems like quite
the deal.
Just last night I enacted a repair on a thermister with 200 degree epoxy. I
would rather have like a higher temperature. Luckily though, I will not have
to pull over to the curb in the sky. It is for a non airplane project, so it
can be redone.
Do not archive
After spending several days looking and contacting, finding that such
resins were only available in 55 gal drums, I have found HTR-250-FR, a
2 part fire retardant epoxy resin w/ a distortion temp. of 375 degrees
F. which is sold in 1 gallon kits priced at about $90 and available
thru: www.resinservices.com
In addition, it passes the FAR 25-853 flammability test.
Cheers,
Fred
A194, mono, about to get a nose job
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|