---------------------------------------------------------- Europa-List Digest Archive --- Total Messages Posted Wed 10/07/09: 8 ---------------------------------------------------------- Today's Message Index: ---------------------- 1. 09:48 AM - Stainless Steel Tubing (flyingphil2) 2. 10:00 AM - Re: A/c radios (rampil) 3. 11:22 AM - Re: Stainless Steel Tubing (Bob Borger) 4. 12:29 PM - Re: Stainless Steel Tubing (Karl Heindl) 5. 12:39 PM - fire retardant resins (Fred Klein) 6. 01:09 PM - Re: A/c radios (Mike Parkin) 7. 01:21 PM - Re: Stainless Steel Tubing (rlborger) 8. 05:16 PM - Re: fire retardant resins (Greg Fuchs) ________________________________ Message 1 _____________________________________ Time: 09:48:15 AM PST US Subject: Europa-List: Stainless Steel Tubing From: "flyingphil2" Hi, I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa Club procedure. To do this I need some stainless steel tube with 0.375" outside diameter, 0.3125" inside diameter (a sliding fit for an AN5 bolt). I seem to have drawn a blank in finding any of this over in the UK. I only need about 6" of it. Does anyone who has done this mod have any of this tube lying around spare? If you do, can you drop me a line please? Regards, Phil Visit - www.EuropaOwners.org ________________________________ Message 2 _____________________________________ Time: 10:00:38 AM PST US Subject: Europa-List: Re: A/c radios From: "rampil" I voted for the SL-30 myself, and after 5 years am still convinced it was the best choice. Modern digital design, standby channel as you ask for, big memory area for your favorite freqs, auto Morse identifier translation, support by Garmin, etc. -------- Ira N224XS Read this topic online here: http://forums.matronics.com/viewtopic.php?p=266956#266956 ________________________________ Message 3 _____________________________________ Time: 11:22:53 AM PST US From: Bob Borger Subject: Re: Europa-List: Stainless Steel Tubing Phil, Good Old McMaster-Carr has it. Part Number 1991T11 Type 440C SS Precision Shim Bushing Stock 3/8" OD, 5/16" ID, 6" Length In stock at $90.11 Each Yup, that's $90.11 for your 6 inch length or about 56.62 GBP. If you can't find it over on your side of the pond or anyplace else for less, I'll be glad to order it and ship it on to you . Check six, Bob Borger On Wednesday, October 07, 2009, at 11:54AM, "flyingphil2" wrote: > >Hi, > >I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa Club procedure. To do this I need some stainless steel tube with 0.375" outside diameter, 0.3125" inside diameter (a sliding fit for an AN5 bolt). > >I seem to have drawn a blank in finding any of this over in the UK. I only need about 6" of it. Does anyone who has done this mod have any of this tube lying around spare? If you do, can you drop me a line please? > >Regards, > >Phil > > >Visit - www.EuropaOwners.org > > ________________________________ Message 4 _____________________________________ Time: 12:29:34 PM PST US From: Karl Heindl Subject: RE: Europa-List: Stainless Steel Tubing Bob=2C you have to remember that mcmastercarr don't supply anyone outside of the U S. I didn't check=2C but ACS may have it=2C too Karl > Date: Wed=2C 7 Oct 2009 13:21:29 -0500 > From: rlborger@mac.com > To: europa-list@matronics.com > Subject: Re: Europa-List: Stainless Steel Tubing > > > Phil=2C > > Good Old McMaster-Carr has it. > > Part Number 1991T11 > Type 440C SS Precision > Shim Bushing Stock 3/8" > OD=2C 5/16" ID=2C 6" Length > In stock at $90.11 Each > > Yup=2C that's $90.11 for your 6 inch length > or about 56.62 GBP. > > If you can't find it over on your side of the pond or anyplace else for l ess=2C I'll be glad to order it and ship it on to you . > > Check six=2C > Bob Borger > > On Wednesday=2C October 07=2C 2009=2C at 11:54AM=2C "flyingphil2" wrote: > > > >Hi=2C > > > >I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa Club procedure. To do this I need some stainless steel tube with 0. 375" outside diameter=2C 0.3125" inside diameter (a sliding fit for an AN5 bolt). > > > >I seem to have drawn a blank in finding any of this over in the UK. I on ly need about 6" of it. Does anyone who has done this mod have any of this tube lying around spare? If you do=2C can you drop me a line please? > > > >Regards=2C > > > >Phil > > > > > > > > > > > > > >Visit - www.EuropaOwners.org > > > > > > > > > > > > > > > > > > > > > =========== =========== =========== =========== > > > ________________________________ Message 5 _____________________________________ Time: 12:39:07 PM PST US From: Fred Klein Subject: Europa-List: fire retardant resins After spending several days looking and contacting, finding that such resins were only available in 55 gal drums, I have found HTR-250-FR, a 2 part fire retardant epoxy resin w/ a distortion temp. of 375 degrees F. which is sold in 1 gallon kits priced at about $90 and available thru: www.resinservices.com In addition, it passes the FAR 25-853 flammability test. Cheers, Fred A194, mono, about to get a nose job ________________________________ Message 6 _____________________________________ Time: 01:09:03 PM PST US From: "Mike Parkin" Subject: RE: Europa-List: A/c radios Mike, The Garmin SL30 is fairly small as radios go. I second David Joyce's comments in 'spades'. The SL30 radio is brilliant in all respects. Regards, Mike Do not archive From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of mike gamble Sent: 06 October 2009 15:11 Subject: Europa-List: A/c radios I need a radio (small footprint) for my mono. I want a built in vox intercom and a 2nd frequency monitor facility would also be good. I have been considering the XCOM760 (which is unfortunately not authorised for use in UK) the microair760, the Funkwerk ATR500 and the ________________________________ Message 7 _____________________________________ Time: 01:21:19 PM PST US Subject: Re: Europa-List: Stainless Steel Tubing From: "rlborger" Karl, Yes, I know about the overseas shipment problem. That is why I offered to purchase the tubing and send it on to him. I have a standing offer to all outside the U.S. to purchase and forward on any goods they can not purchase and have sent directly. Best regards, Bob Visit - www.EuropaOwners.org ________________________________ Message 8 _____________________________________ Time: 05:16:24 PM PST US From: "Greg Fuchs " Subject: RE: Europa-List: fire retardant resins Thanks Fred, I am adding that to my favorites list. That seems like quite the deal. Just last night I enacted a repair on a thermister with 200 degree epoxy. I would rather have like a higher temperature. Luckily though, I will not have to pull over to the curb in the sky. It is for a non airplane project, so it can be redone. Do not archive After spending several days looking and contacting, finding that such resins were only available in 55 gal drums, I have found HTR-250-FR, a 2 part fire retardant epoxy resin w/ a distortion temp. of 375 degrees F. which is sold in 1 gallon kits priced at about $90 and available thru: www.resinservices.com In addition, it passes the FAR 25-853 flammability test. Cheers, Fred A194, mono, about to get a nose job ------------------------------------------------------------------------------------- Other Matronics Email List Services ------------------------------------------------------------------------------------- Post A New Message europa-list@matronics.com UN/SUBSCRIBE http://www.matronics.com/subscription List FAQ http://www.matronics.com/FAQ/Europa-List.htm Web Forum Interface To Lists http://forums.matronics.com Matronics List Wiki http://wiki.matronics.com Full Archive Search Engine http://www.matronics.com/search 7-Day List Browse http://www.matronics.com/browse/europa-list Browse Digests http://www.matronics.com/digest/europa-list Browse Other Lists http://www.matronics.com/browse Live Online Chat! http://www.matronics.com/chat Archive Downloading http://www.matronics.com/archives Photo Share http://www.matronics.com/photoshare Other Email Lists http://www.matronics.com/emaillists Contributions http://www.matronics.com/contribution ------------------------------------------------------------------------------------- These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.