Today's Message Index:
----------------------
1. 02:25 AM - Re: Stainless Steel Tubing (Raimo Toivio)
2. 07:50 AM - Re: Stainless Steel Tubing (Bob Borger)
3. 09:16 AM - Re: Stainless Steel Tubing (Fred Klein)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Stainless Steel Tubing |
Count me on the list too, please!
Wishes, Raimo OH-XRT
----- Original Message -----
From: "flyingphil2" <ptiller@lolacars.com>
Sent: Wednesday, October 07, 2009 7:54 PM
Subject: Europa-List: Stainless Steel Tubing
>
> Hi,
>
> I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa
Club procedure. To do this I need some stainless steel tube with 0.375" outside
diameter, 0.3125" inside diameter (a sliding fit for an AN5 bolt).
>
> I seem to have drawn a blank in finding any of this over in the UK. I only need
about 6" of it. Does anyone who has done this mod have any of this tube lying
around spare? If you do, can you drop me a line please?
>
> Regards,
>
> Phil
>
>
>
>
>
>
> Visit - www.EuropaOwners.org
>
>
>
>
>
>
>
>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Stainless Steel Tubing |
Phil & Raimo,
I've been looking for a source for your SS tubing.
So far, only McMaster carries 3/8" (0.375) OD x 5/16" (0.3125) ID (wall thickness
1/16" 0.03125) stainless steel tubing in stock. And it is expensive.
There are plenty of places that have stainless steel tubing that is 3/8 OD but
with a wall thickness of 0.035. For instance, Aircraft Spruce has 304 SS tubing
in those diameter for only $3.35/ft. Do either of you have a lathe available
to drill/ream your short length to the proper interior diameter?
My offer still stands to purchase the stock from McMaster or any other other U.S.
source and ship it on to you.
Check six,
Bob Borger
On Thursday, October 08, 2009, at 04:38AM, "Raimo Toivio" <raimo.toivio@rwm.fi>
wrote:
>
>Count me on the list too, please!
>
>Wishes, Raimo OH-XRT
>----- Original Message -----
>From: "flyingphil2" <ptiller@lolacars.com>
>To: <europa-list@matronics.com>
>Sent: Wednesday, October 07, 2009 7:54 PM
>Subject: Europa-List: Stainless Steel Tubing
>
>
>>
>> Hi,
>>
>> I'm wanting to do the Outrigger Pivot Bearing mod in accordance with the Europa
Club procedure. To do this I need some stainless steel tube with 0.375" outside
diameter, 0.3125" inside diameter (a sliding fit for an AN5 bolt).
>>
>> I seem to have drawn a blank in finding any of this over in the UK. I only
need about 6" of it. Does anyone who has done this mod have any of this tube
lying around spare? If you do, can you drop me a line please?
>>
>> Regards,
>>
>> Phil
>>
>>
>>
>>
>>
>>
>> Visit - www.EuropaOwners.org
>>
>>
>>
>>
>>
>>
>>
>>
>>
>
>
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Stainless Steel Tubing |
On Oct 7, 2009, at 9:54 AM, flyingphil2 wrote:
> I need some stainless steel tube with 0.375" outside diameter,
> 0.3125" inside diameter (a sliding fit for an AN5 bolt).
I've found onlinemetals.com, recently acquired by ThyssenKrupp NA, to
be an excellent source for small quantities of specialty metals and
plastics. They sell a 0.375" OD, 0.028" wall, 0.319" ID...SS 304/304L
tube @ $3.78/ft. It is also available in SS 316/316L @ $4.38/ft.
...can't help but wonder if such tubing may have been used in the
original mod if evidence of extraordinary expense for material or
special machining is lacking...
Fred
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|