Today's Message Index:
----------------------
1. 09:21 AM - eliminating sanding dust (Raimo Toivio)
2. 04:04 PM - Re: eliminating sanding dust (hurstkr@redzone.com.au)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | eliminating sanding dust |
Builders
and other people who live among sanding dust (and does not want):
you should know this product www.mirka.com
That is Finnish and at least Kingsley from Oz likes it.
Raimo OH-XRT
----- Original Message -----
From: Klaus Erbismann
Cc: Jari Kokko
Sent: Monday, November 30, 2009 10:40 AM
Dear Raimo and Kingsley,
thank you very much for the feedback you sent us on Mirka products and
Abranet in particular.
The dustfree sanding with Abranet has been appriciated by many car- and
airplane producers and we are very happy to learn that you have also had
a pleasent sanding experince with our products.
May I take advantage of this opportunity to wish you a Merry Christmas
and happy new year.
Thank you for your support and encouraging feedback.
Kind regards,
Klaus
*********************************************************************
Klaus Erbismann
Business Sector Manager
Surface Finishing
KWH Mirka Ltd
Pensalav=E4gen 210
FIN-66850 Jeppo
Phone : +358 20 76 02 111
Fax : +358 20 76 02 296
Mobile : +358 40 70 89 251
www.mirka.com
www.netsanding.com
********************************************************************
The information contained in this e-mail is confidential and is
intended for the addressee(s) only. If you have received this message in
error please do not read, copy, forward or use the information contained
within, please delete all copies and kindly inform the sender. KWH Mirka
Ltd accepts no liability for any consequential damage caused by the
presence of viruses contained within the message or its attachments. KWH
Mirka Ltd takes reasonable care to scan for viruses in outgoing messages
but recommends that the user carry out their own virus checking
procedures. The views contained within the message are those of the
individual sender unless expressly stated to be those of KWH Mirka Ltd.
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: eliminating sanding dust |
> and other people who live among sanding dust (and does not want):
> you should know this product www.mirka.com
> That is Finnish and at least Kingsley from Oz likes it.
>
> Raimo OH-XRT
Raimo and others,
I endorse your comments Raimo but just to clarify, I have only used
Abranet for the sanding of the primer filler for which I have found it
excellent. Sanding in temperatures around 40C with a mask on is not
very pleasant so the dust free sanding with Abranet is a God send.
Unlike sanding discs with holes in them for the same purpose, Abranet
is totally porous and does not still clog up in places.
As good as Abranet is for sanding the primer filler, I would not use
it however for sanding the wings (Classic) or other large surfaces
with simple curves because the Abranet (at least what I have used) is
far too small to obtain a wave free surface.
Like all good products however, it is fairly expensive.
Cheers
Kingsley
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|