Today's Message Index:
----------------------
1. 12:09 AM - CG of Rotax (Fred Klein)
2. 12:32 AM - Re: CG of Rotax (Michel AUVRAY)
3. 12:36 PM - Re: CG of Rotax (Fred Klein)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Gentlemen,
By any chance, does anyone know the weight of their Rotax and the
location of its C of G (when mounted in place) relative to the
Fuselage Datum 0.0 or perhaps relative to the firewall?
The info would be a great data point for me as I configure the
mounting frame for my RAM/Sube; as I look at the photos in the 912S
installation manual, it appears that I will be able to mount the Sube
a bit further aft than the Rotax. Given that the RAM/Sube is a bit
heavier than the Rotax, I'm hoping that moments will be about the same.
Assistance much appreciated,
Fred
A194
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Fred Klein a crit :
>
> Gentlemen,
>
> By any chance, does anyone know the weight of their Rotax and the
> location of its C of G (when mounted in place) relative to the
> Fuselage Datum 0.0 or perhaps relative to the firewall?
>
> The info would be a great data point for me as I configure the
> mounting frame for my RAM/Sube; as I look at the photos in the 912S
> installation manual, it appears that I will be able to mount the Sube
> a bit further aft than the Rotax. Given that the RAM/Sube is a bit
> heavier than the Rotax, I'm hoping that moments will be about the same.
>
> Assistance much appreciated,
>
> Fred
> A194
>
>
These informations are on the rotax manual of each engine.
Drawings front lateral upside and CofG if you don't have it is possible
to create a pdf for you
--
--|--
--------(*)--------
Michel AUVRAY
mau11@free.fr
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Michel,
Thank you...I don't have the Rotax manuals...if they are available
online, I will look up the C of G of the Rotax...but that, of course,
is only part of the information I'm looking for. The crucial thing is
the location of the Rotax on the Europa.
Fred
On Dec 27, 2009, at 12:29 AM, Michel AUVRAY wrote:
> These informations are on the rotax manual of each engine.
> Drawings front lateral upside and CofG if you don't have it is
> possible to create a pdf for you
> Fred Klein a crit :
>> By any chance, does anyone know the weight of their Rotax and the
>> location of its C of G (when mounted in place) relative to the
>> Fuselage Datum 0.0 or perhaps relative to the firewall?
>>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|