Today's Message Index:
----------------------
1. 07:03 AM - Re: Re: Electric Trim Problems (Jeff B)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Electric Trim Problems |
Though handy, a relay is not necessary in a two switch situation. My
bird is rigged with grip top buttons at P-1 and a rocker at P-2. The
difference is that I have them tied into a diverter switch. Switch is
in one position when P-1 is in control and in the other position when
P-2 has the A/C. Switch is just above the rocker switch, so P-2 has no
trouble switching the system. A lot cheaper than the relay, and less
troublesome...
Jeff - Baby Blue
On 3/2/2010 9:56 PM, Gavin & Anne wrote:
> --> Europa-List message posted by: "Gavin& Anne"<gavanne@iconz.co.nz>
>
> Hi John
>
> If you have a stick top switch and a rocker switch there will be a relay
> deck in the system
> Both switches will be connected into the relay and 2 wires will run from the
> relay to the servo. The relay is probably fairly close behind your rocker
> switch
> Ray Allen has an excellent wiring diagram on their web site for this exact
> situation.
>
> Good Luck
> Gavin Lee....#355
>
>
> -----Original Message-----
> From: owner-europa-list-server@matronics.com
> [mailto:owner-europa-list-server@matronics.com] On Behalf Of John Price
> Sent: Wednesday, 3 March 2010 8:08 a.m.
> To: europa-list@matronics.com
> Subject: Europa-List: Re: Electric Trim Problems
>
> --> Europa-List message posted by: "John Price"<nicolaprice@tiscali.co.uk>
>
> Thanks Chaps,
>
> Having given this some thought I think that we will replace the relay for a
> new Mk 2 Ray Allen unit. This Saturdays job!
> We don't think that the wiring is the fault because the DC motor would
> exhibit the problem when driving in either direction.
>
> As we didn't build the aeroplane any suggestions where we might find the
> thing? I suspect behind the panel close to the isolator switch might be a
> good starting point. Last help, Is taking the panel off easy, or a sod of a
> job ?
>
> John.
>
>
> Read this topic online here:
>
> http://forums.matronics.com/viewtopic.php?p=288954#288954
>
>
> Checked by AVG - www.avg.com
>
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|