Today's Message Index:
----------------------
1. 09:00 AM - Hydraulic brake hose (mau11)
2. 10:01 AM - Re: Hydraulic brake hose (Mike Parkin)
3. 10:23 AM - Re: Re: Hydraulic brake hose (mau11)
4. 10:26 AM - Re: Hydraulic brake hose (Robert Borger)
5. 12:57 PM - Re: Re: Hydraulic brake hose (Mike Parkin)
6. 02:01 PM - Re: Hydraulic brake hose (Gilles Thesee)
7. 04:04 PM - Re: Hydraulic brake hose (Robert Borger)
8. 06:52 PM - Re: Hydraulic brake hose (Kevin Klinefelter)
9. 07:24 PM - Re: Hydraulic brake hose (Martin Boyle)
10. 08:02 PM - Re: Hydraulic brake hose (Martin Boyle)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Hydraulic brake hose |
X-mailer: Foxmail 6, 15, 201, 22 [cn]
Hi all,
I see this picture on web site but I don't remember where!
I am interested to install this hose and banjo on my brake, does anyone know where
it is possible to buy this assembly?
Thanks
mau11
06-03-2010
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Hydraulic brake hose |
Hi,
I think that the photograph is one I took of my monowheel brake
installation. The hose actually came from France but is readily available
from a good hydraulic parts merchant in the UK, as is the banjo coupling.
Regards,
Mike
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of mau11
Sent: 06 March 2010 16:55
Subject: Europa-List: Hydraulic brake hose
Hi all,
I see this picture on web site but I don't remember where!
I am interested to install this hose and banjo on my brake, does anyone know
where it is possible to buy this assembly?
Thanks
_____
mau11
06-03-2010
Checked by AVG - www.avg.com
07:39:00
Message 3
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
X-mailer: Foxmail 6, 15, 201, 22 [cn]
Hi Mike thanks for this information I live in France do you remember in what shop
you purchase it?
Thanks
Michel AUVRAY
Builder 145
06-03-2010
mau11
De : Mike Parkin
Date/heure : 06-03-2010 19:05:11
A : europa-list@matronics.com
Cc :
Sujet : RE: Europa-List: Hydraulic brake hose
Hi,
I think that the photograph is one I took of my monowheel brake installation.
The hose actually came from France but is readily available from a good hydraulic
parts merchant in the UK, as is the banjo coupling.
Regards,
Mike
From: owner-europa-list-server@matronics.com [mailto:owner-europa-list-server@matronics.com] On Behalf Of mau11
Sent: 06 March 2010 16:55
Subject: Europa-List: Hydraulic brake hose
Hi all,
I see this picture on web site but I don't remember where!
I am interested to install this hose and banjo on my brake, does anyone know where
it is possible to buy this assembly?
Thanks
mau11
06-03-2010
Checked by AVG - www.avg.com
07:39:00
Message 4
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
Mike,
You wouldn't happen to have the specs for that fitting would you?
I'm working on my brakes and that fitting would be perfect.
Bob Borger
Sent from my iPhone
On Mar 6, 2010, at 11:58, Mike Parkin
<mikenjulie.parkin@btinternet.com> wrote:
> Hi,
>
> I think that the photograph is one I took of my monowheel brake
> installation. The hose actually came from France but is readily
> available from a good hydraulic parts merchant in the UK, as is the
> banjo coupling.
>
>
> Regards,
>
> Mike
>
>
> From: owner-europa-list-server@matronics.com [mailto:owner-europa-
> list-server@matronics.com] On Behalf Of mau11
> Sent: 06 March 2010 16:55
> To: europa-list
> Subject: Europa-List: Hydraulic brake hose
>
>
> Hi all,
> I see this picture on web site but I don't remember where!
> I am interested to install this hose and banjo on my brake, does
> anyone know where it is possible to buy this assembly?
>
> Thanks
>
>
> mau11
> 06-03-2010
> Checked by AVG - www.avg.com
> 07:39:00
>
>
Message 5
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Hydraulic brake hose |
Michel,
The hose came from MDO Aircraft when I bought their stick mounted hand
brake caliper. (See attachment) I think M. Bastien of MDO Aircraft is
based in Biarritz. I do know that some of our colleagues on this site
have had trouble contacting him. A French person in France may have
better luck.
Bob,
I=99ll see if I can find the details of the banjo fitting. I might
have to go back to the shop on Monday.
Regards,
Mike.
Do not Archive
Message 6
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
Mike Parkin a crit :
> *I think M. Bastien of MDO Aircraft is based in Biarritz. I do know
> that some of our colleagues on this site have had trouble contacting
> him. A French person in France may have better luck.*
Mike and all,
Although I've never met Mr Bastien, I've had the opportunity to ring him
about his master cylinder.
I get the impression that communication with potential customers would
be better if their initial message was in French, so if some of you
gentlemen were kind enough to provide an example message, I'd be happy
to translate it into French to help facilitate contact with Mr Bastien.
Like with many of my fellow countrymen, the response to a message in
French might prove considerably quicker.
Best regards,
--
Gilles
http://contrails.free.fr
> **
>
> * *
>
Message 7
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
Mike & Michel,
I'm in the process of converting to the stick mounted hand brake from
MDO. The control column mounted master cylinder is beautifully made.
Unfortunately, M. Bastien provided a caliper fitting that consisted of
an AN9186 Nipple (Flared Tube to Pipe Thread) to replace the existing 90
degree fitting and then put a 90 degree AN hose end fitting on the end
of the hose. See pic:
The AN fitting is NPT (National Pipe Thread), which is a tapered thread.
The 90 degree fitting that came off the caliper was a straight thread
so the AN fitting only goes in about 2 threads and quits. That's not
really acceptable. A banjo hose end like yours, Mike, would be perfect
but I can't find one over here on this side of the pond.
Tomorrow, I'll be posting more pics on my build site showing how the
hose end of the banjo should be configured as it's not a (U.S.) typical
37 degree AN type fitting.
If there's anyone out there in Europe or the U.K. that can find the
correct fitting, I'd sure be glad to pay for it as well as postage to
send it to me.
Thanks in advance!
Check six,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/forums/gallery2.php?g2_itemId=60232
Aircraft Flying!
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
On Mar 6, 2010, at 14:53, Mike Parkin wrote:
> Michel,
>
> The hose came from MDO Aircraft when I bought their stick mounted hand
brake caliper. (See attachment) I think M. Bastien of MDO Aircraft is
based in Biarritz. I do know that some of our colleagues on this site
have had trouble contacting him. A French person in France may have
better luck.
>
>
> Bob,
>
> I=92ll see if I can find the details of the banjo fitting. I might
have to go back to the shop on Monday.
>
>
>
> Regards,
>
> Mike.
>
> Do not Archive
>
> <100108a-doc generale 2009-1 BRAKE.pdf>
Message 8
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
Hi Bob,
You can tap it to pipe thread, as I did after talking to Terry and Dave
(N135TD). You cut the tip of tap off so it won't bottom out. So you are
cutting the top part of the threads wider to accept "our" pipe thread.
But the banjo fitting looks very nice too...
Kevin
N211KA
----- Original Message -----
From: Robert Borger
To: europa-list@matronics.com
Sent: Saturday, March 06, 2010 4:01 PM
Subject: Re: Europa-List: Hydraulic brake hose
Mike & Michel,
I'm in the process of converting to the stick mounted hand brake from
MDO. The control column mounted master cylinder is beautifully made.
Unfortunately, M. Bastien provided a caliper fitting that consisted of
an AN9186 Nipple (Flared Tube to Pipe Thread) to replace the existing 90
degree fitting and then put a 90 degree AN hose end fitting on the end
of the hose. See pic:
The AN fitting is NPT (National Pipe Thread), which is a tapered
thread. The 90 degree fitting that came off the caliper was a straight
thread so the AN fitting only goes in about 2 threads and quits. That's
not really acceptable. A banjo hose end like yours, Mike, would be
perfect but I can't find one over here on this side of the pond.
Tomorrow, I'll be posting more pics on my build site showing how the
hose end of the banjo should be configured as it's not a (U.S.) typical
37 degree AN type fitting.
If there's anyone out there in Europe or the U.K. that can find the
correct fitting, I'd sure be glad to pay for it as well as postage to
send it to me.
Thanks in advance!
Check six,
Bob Borger
Europa Kit #A221 N914XL, XS Mono, Intercooled 914, Airmaster C/S
http://www.europaowners.org/forums/gallery2.php?g2_itemId=60232
Aircraft Flying!
3705 Lynchburg Dr.
Corinth, TX 76208
Home: 940-497-2123
Cel: 817-992-1117
On Mar 6, 2010, at 14:53, Mike Parkin wrote:
Michel,
The hose came from MDO Aircraft when I bought their stick mounted
hand brake caliper. (See attachment) I think M. Bastien of MDO
Aircraft is based in Biarritz. I do know that some of our colleagues on
this site have had trouble contacting him. A French person in France
may have better luck.
Bob,
I=92ll see if I can find the details of the banjo fitting. I might
have to go back to the shop on Monday.
Regards,
Mike.
Do not Archive
<100108a-doc generale 2009-1 BRAKE.pdf>
Message 9
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
I am in Australia and we assemble a simular hosefor use on brakes our
hose is swaged {crimped} we can make it for you but will need some info
Thanks Martin
----- Original Message -----
From: mau11
To: europa-list
Sent: Sunday, March 07, 2010 2:54 AM
Subject: Europa-List: Hydraulic brake hose
Hi all,
I see this picture on web site but I don't remember where!
I am interested to install this hose and banjo on my brake, does
anyone know where it is possible to buy this assembly?
Thanks
-------------------------------------------------------------------------
-----
mau11
06-03-2010
Message 10
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Subject: | Re: Hydraulic brake hose |
----- Original Message -----
From: Martin Boyle
To: europa-list@matronics.com
Sent: Sunday, March 07, 2010 1:20 PM
Subject: Re: Europa-List: Hydraulic brake hose
I am in Australia and we assemble a simular hosefor use on brakes our
hose is swaged {crimped} we can make it for you but will need some info
Thanks Martin
----- Original Message -----
From: mau11
To: europa-list
Sent: Sunday, March 07, 2010 2:54 AM
Subject: Europa-List: Hydraulic brake hose
Hi all,
I see this picture on web site but I don't remember where!
I am interested to install this hose and banjo on my brake, does
anyone know where it is possible to buy this assembly?
Thanks
-------------------------------------------------------------------------
---
mau11
06-03-2010
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|