Today's Message Index:
----------------------
1. 01:35 AM - Re: Re: Europa Servos (Mike Parkin)
2. 02:13 AM - Re: Re: Europa Servos (G-IANI)
3. 03:39 AM - AUtopilot (klaus dietrich)
4. 04:49 AM - Re: Autopilot Servo Location (Paul Mitchell)
Message 1
| INDEX | Back to Main INDEX |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Europa Servos |
>Couldn't just find a local welder to put on the
>plates?
Martin,
You can of course modify your own CS10. I made the original modified CS10
before it was adopted by Europa. But take care on exactly where you
position the additional horn.
Regards,
Mike.
Do not archive.
Message 2
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Europa Servos |
Martin
Yes, as Mike says, you could put the horns on your existing CS10. The
details for doing this are shown on the attached drawing.
My understanding is that all future CS10s will have the horns as standard.
Ian Rickard G-IANI XS Trigear, 280 hours
Europa Club Mods Rep (Trigear)
e-mail g-iani@ntlworld.com
-----Original Message-----
From: owner-europa-list-server@matronics.com
[mailto:owner-europa-list-server@matronics.com] On Behalf Of Martin Tuck
Sent: 18 March 2010 01:45
Subject: Europa-List: Re: Europa Servos
Thanks for all the replies - most helpful.
I just need to know the prices for the Mods now. I see I would need a
new pitch pivot tube. Couldn't just find a local welder to put on the
plates?
Martin Tuck
N152MT
Wichita, Kansas
Richard Wheelwright wrote:
> Hi,
> Have a look at the Europa web site. Under Mods. The Auto Pilot is on
> there, with parts and instructions.
>
>
> ============================================
>
> Thank You
> Richard Wheelwright
>
> ============================================
>
>
Message 3
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
Martin,
I have installed the truetrack AP two years ago with two servos and it
works perfectly!
You can see pictures of the installation here:
http://picasaweb.google.at/kdietric1/EuropaAP?authkey=Gv1sRgCN_KjL_1rPbcgwE&feat=directlink
If you need further info please call me!
All the best,
Klaus
--
Oracle <http://www.oracle.com>
Klaus Dietrich
Phone: +43 1 33 777 825 <tel:+43%201%2033%20777%20825> | |
Oracle Financing, EMEA
ORACLE Austria | IZD Tower, Wagramer Strasse 17-19 | 1223 Vienna
Green Oracle <http://www.oracle.com/commitment> Oracle is committed to
developing practices and products that help protect the environment
Message 4
| INDEX | Back to Main INDEX |
| PREVIOUS | Skip to PREVIOUS Message |
| NEXT | Skip to NEXT Message |
| LIST | Reply to LIST Regarding this Message |
| SENDER | Reply to SENDER Regarding this Message |
|
| Subject: | Re: Autopilot Servo Location |
Gents,
Now that mod 75 and 76 are LAA/factory approved, If I can be of any
assistance in getting the Trio kit into your aircraft, please contact me
off line.
Paul Mitchell
Trio UK agent
----- Original Message -----
From: Philip Levi
To: europa-list@matronics.com
Sent: Wednesday, March 17, 2010 8:18 AM
Subject: Re: Europa-List: Autopilot Servo Location
Martin
One of the best altitude hold (dual axis) autopilots is the Trio Pilot
Pro. Excellent full details are on the Trio web site.
I was in correspondence with Paul Mitchell, the UK agent for Trio last
December and he was in touch with Andy Draper of the UK Light Aircraft
Association which were in the process of giving it approval for the
Europa. The relevant correspondence copied to me was:
----- Original Message -----
From: Andy Draper
To: Paul Mitchell
Sent: Wednesday, December 02, 2009 11:22 AM
Subject: RE: PP into a Europa
Hi Paul,
Europa are on the verge of launching Mod 76 which covers the altitude
hold aspect (awaiting flight test results) and the wing leveller part is
covered by the recently introduced Mod 75. Mod 75 effectively replaces
SM10507 which has been around for a while now. They've opted for
in-house mods to cover the rest of the world.
Mods 75 and 76 will be treated as Facory Options now, but both will
require inspection checks and flight test autorised by LAA Engineering
issued PFRC (as laid down in the mod leaflets).
Andy
From: Paul Mitchell [mailto:pm@tecnam.co.uk]
Sent: 02 December 2009 10:59
To: Andy Draper
Subject: PP into a Europa
Andy,
What is the currant position in fitting a PP into a Europa.Is it a
standard mod yet.
Any info gratefully received.
Paul
Note the reference to in-house mods for the rest of the world.
You will find it is a very neat and light weight unit at modest cost
compared to the competition. However, I do not speak from experience.
I plan to purchase it probably later this year after it has been
approved by the LAA.
Philip Levi
G-BWWB Monowheel Classic.
E-mail: pjlevi@gmail.com
On 17 March 2010 05:30, Martin Tuck <MJKTuck@cs.com> wrote:
Hi Folks,
I'm still considering a panel refurb - out with the pneumatic system
and in with an EFIS - I really like the Dynon Skyview.
Anyone installed autopilot servos? I think I've seen some roll
servos installed under the seat but I've not seen pitch servo
installation.
Does anyone have any drawings/photos?
Regards,
Martin Tuck
:
opa-List"
target="_blank">http://www.matronics.com/Navigator?Europa-List<===
============
= --> h
a href="http://www.matronics.com/contribution"
target="_blank">http://www.matronics.com/contribution
==========
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|