Today's Message Index:
----------------------
1. 06:17 AM - Firewall (William Daniell)
2. 06:58 AM - Re: Firewall (jimpuglise@comcast.net)
Message 1
INDEX | Back to Main INDEX |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
Morning
Along similar lines to kevin's email has anyone used insulating material
for the firewall and if so, what sort and how much?
Will
Bogota
Kevin Klinefelter wrote:
>
> Gidday Tony,
> I have a similar installation on a monowheel and 6' worked for me.
>
> Kevin
> ----- Original Message -----
> From: "Tony Renshaw" <tonyrenshaw268@gmail.com>
> To: <europa-list@matronics.com>
> Sent: Saturday, May 01, 2010 7:31 PM
> Subject: Europa-List: Firesleeve on a 914 Engine
>
>
>
>>
>> Gidday,
>> I am off to the LA in a day or two and am putting together a Spruce order.
>> I'd like to know the amount of Firesleeve product I should get for my fuel
>> lines from Firewall to Fuel Regulator, a run from Fuel Regulator to top of
>> footwell where I will have a Differential Fuel Pressure Sensor fitted, and
>> the run from Fuel Regulator to exit in firewall of fuel return line. Would
>> 6' be enough, and is there anything else I should consider?
>> Reg
>> Tony Renshaw
>> Sydney Aussie
>>
>>
>>
>
Message 2
INDEX | Back to Main INDEX |
PREVIOUS | Skip to PREVIOUS Message |
NEXT | Skip to NEXT Message |
LIST | Reply to LIST Regarding this Message |
SENDER | Reply to SENDER Regarding this Message |
|
AS markets a stainless steel firewall kit.=C2- In it they give you about
a square yard of SS sandwich material and a tube of adhesive.=C2- You fir
st cut patterns from cardboard, then cut the SS material with scissors, the
n use the adhesive to bond it to the firewall.=C2- It is actually about a
2 hour job and quite easy.=C2- However, there is a "gotcha."=C2- Be ve
ry careful of the SS material once you have cut it.=C2- It is VERY SHARP
and will cut your hands to ribbons if you are not careful.
Jim Puglise A-283
----- Original Message -----
From: "William Daniell" <wdaniell@etb.net.co>
Sent: Monday, May 3, 2010 9:09:09 AM GMT -05:00 US/Canada Eastern
Subject: Europa-List: Firewall
Morning
Along similar lines to kevin's email has anyone used insulating material
for the firewall and if so, what sort and how much?
Will
Bogota
Kevin Klinefelter wrote:
>
>
> Gidday Tony,
> I have a similar installation on a monowheel and 6' worked for me.
>
> Kevin
> ----- Original Message -----
> From: "Tony Renshaw" <tonyrenshaw268@gmail.com>
> To: <europa-list@matronics.com>
> Sent: Saturday, May 01, 2010 7:31 PM
> Subject: Europa-List: Firesleeve on a 914 Engine
>
>
> =C2-
m>
>>
>> Gidday,
>> I am off to the LA in a day or two and am putting together a Spruce orde
r.
>> I'd like to know the amount of Firesleeve product I should get for my fu
el
>> lines from Firewall to Fuel Regulator, a run from Fuel Regulator to top
of
>> footwell where I will have a Differential Fuel Pressure Sensor fitted, a
nd
>> the run from Fuel Regulator to exit in firewall of fuel return line. Wou
ld
>> 6' be enough, and is there anything else I should consider?
>> Reg
>> Tony Renshaw
>> Sydney Aussie
>>
>>
>> =C2- =C2-
>
===========
===========
MS -
===========
e -
=C2- =C2- =C2- =C2- =C2--Matt Dralle, List Admin.
===========
Other Matronics Email List Services
These Email List Services are sponsored solely by Matronics and through the generous Contributions of its members.
-- Please support this service by making your Contribution today! --
|